Washers Hotpoint.com Safety Instructions . . . . . . . . . . . . 2 Operating Instructions Control Panels . . . . . . . . . . . . . . .3–5 Control Settings . . . . . . . . . . . . . 4, 6 Features . . . . . . . . . . . . . . . . . . . . . .7 Loading and Using the Washer . . . . . . . . . . . . . . . . . .8, 9 Owner’s Manual VVSR1070 VBXR1090 VBSR3100 VWSR4150 VLXR1020 Troubleshooting Tips . . . . . . 10–12 Consumer Support Consumer Support . . . . . Back Cover Product Registration . . . . . . . .
Safety Instructions IMPORTANT SAFETY INFORMATION. READ ALL INSTRUCTIONS BEFORE USING. WARNING! For your safety, the information in this manual must be followed to minimize the risk of fire or explosion, electric shock, or to prevent property damage, personal injury, or loss of life. WATER HEATER SAFETY Under certain conditions hydrogen gas may be produced in a water heater that has not been used for two weeks or more. Hydrogen gas can be explosive under these circumstances.
About the washer control panel. (models VVSR1070, VBXR1090, VBSR3100, and VLXR1020) Hotpoint.com Safety Instructions You can locate your model number on the back of your washer, behind the control panel.
Operating Instructions Safety Instructions About the washer control panel (cont.) Model VLXR1020 OFF warm wash cold wash Control settings. Load Size Loosely load clothes no higher than the top row of holes in the washer tub. The water level should just cover the clothes. Adjust the load size accordingly. Temperature Select the water temperature for the wash and rinse cycles. On some models, the temperature is controlled by the wash cycle knob.
About the washer control panel. (model VWSR4150) • Select load size and other wash options • Select wash cycle • Close lid • Pull knob Quick Start Guide Operating Instructions • Add diluted fabric softener (on models with a fabric softener dispenser) • Add clothes Safety Instructions • Add detergent Hotpoint.
Safety Instructions Control settings. Load Size (on some models) Loosely load clothes no higher than the top row of holes in the washer tub. The water level should just cover the clothes. Adjust the load size accordingly. Temperature Select the water temperature for the wash and rinse cycles. Always follow fabric manufacturer’s care label or instructions when laundering. Custom Care The agitator moves clothes around for a cleaner wash; the basket spins later in the cycle to release water from the load.
About the washer features. NOTE: Not all features are available on all washer models. Hotpoint.com The agitator cap fits into the top of the agitator. If it accidentally comes off, simply put it back on. 3 Add water to dispenser until it reaches the maximum fill line. The fabric softener dispenser automatically releases liquid fabric softener at the proper time during the cycle.
Safety Instructions Loading and using the washer. Always follow fabric manufacturer’s care label when laundering. Sorting Wash Loads Sort by color (whites, lights, colors), soil level, fabric type (sturdy cottons, easy care, delicates), and whether the fabric produces lint (terry cloth, chenille), or collects lint (velveteen, corduroy). Proper Use of Detergent Operating Instructions Add detergent and start the washer before adding clothes so that the detergent can work effectively.
Hotpoint.com Wash Basket: Leave the lid open after washing to allow moisture to evaporate. If you want to clean the basket use a clean soft cloth dampened with liquid detergent, then rinse. (Do not use harsh or gritty cleaners.) Moving and Storage: Ask the service technician to remove water from drain pump and hoses. See the Installation Instructions packed with product for information on how to reinstall the shipping rod to keep the tub stationary when moving the washer.
Operating Instructions Safety Instructions Before you call for service… Troubleshooting Tips Save time and money! Review the charts on the following pages, or visit Hotpoint.com. You may not need to call for service. WATER Too many suds Water leaks Troubleshooting Tips Water temperature is incorrect Water won’t drain Possible Causes What To Do Type of detergent • Switch to a lower sudsing detergent brand and follow instructions on package. Very soft water • Try less detergent.
Hotpoint.com Possible Causes What To Do The washer normally pauses between washing steps. Washer won’t operate Washer is unplugged • Make sure cord is plugged securely into a working outlet. Water supply is turned off • Turn both hot and cold faucets fully on. Controls are not set properly • Check controls and make sure Cycle knob is pulled out to ON position. Lid is open – safety feature prevents agitation and spinning when lid is up • Close lid and reset cycle, to the beginning if necessary.
PERFORMANCE (cont.) Consumer Support Troubleshooting Tips Operating Instructions Safety Instructions Before you call for service… Possible Causes What To Do Pilling Result of normal wear on poly-cotton blends and fuzzy fabrics • While this is not caused by the washer, you can slow the pilling process by washing garments inside out.
GE Service Protection Plus™ GE, a name recognized worldwide for quality and dependability, offers you Service Protection Plus ™—comprehensive protection on all your appliances— No Matter What Brand! Benefits Include: • Backed by GE • All brands covered • Unlimited service calls • All parts and labor costs included • No out-of-pocket expenses • No hidden deductibles • One 800 number to call We’ll Cover Any Appliance. Anywhere. Anytime.
Consumer Product Ownership Registration Dear Customer: Thank you for purchasing our product and thank you for placing your confidence in us. We are proud to have you as a customer! Follow these three steps to protect your new appliance investment: 1 2 3 Complete and mail your Consumer Product Ownership Registration today. Have the peace of mind of knowing we can contact you in the unlikely event of a safety modification. Read your Owner’s Manual carefully.
Hotpoint Washer Warranty. Staple your receipt here. Proof of the original purchase date is needed to obtain service under the warranty. We Will Replace: One Year From the date of the original purchase Any part of the washer which fails due to a defect in materials or workmanship. During this full one-year warranty, we will also provide, free of charge, all labor and in-home service to replace the defective part.
Consumer Support. Hotpoint Website Hotpoint.com Have a question or need assistance with your appliance? Try the Hotpoint Website 24 hours a day, any day of the year! You can also shop for more great Hotpoint products and take advantage of all of our on-line support services designed for your convenience. Schedule Service Hotpoint.com Expert Hotpoint repair service is only one step away from your door. Get on-line and schedule your service at your convenience 24 hours any day of the year! Or call 800.