Safety Data Sheet

ALL IN 1 DISHWASHER TABLETS Flacer - page 5 of 12
SECTION 9. Physical and chemical properties
9.1. Information on basic physical and chemical properties
Solid Physical State
Color blue white green
lemon Odor
pH. 10.3 - 11.3
Melting point (sodium carbonate). 851 ° C.
Initial boiling point. Not applicable, solid product
Boiling range. Not applicable, solid product
Flash point. Not inammable
Flammability of solids and gases Not ammable.
Lower ammability limit. Not inammable
Upper ammability limit. Not inammable.
Lower Explosive Limit. Not explosive.
Upper Explosive Limit. Not explosive.
Steam pressure. Not applicable, solid product
Vapor density Not applicable, solid product
Specic weight. 1,000 Kg / l
Solubility soluble in water
Self-ignition temperature. Not applicable
Decomposition temperature (sodium percarbonate). Approx. 70 ° C.
Viscosity Not applicable.
Explosive properties Not explosive.
Oxidizing properties Sodium percarbonate liberates oxygen above 50 ° C.
9.2. More information
Information not available
SECTION 10. Stability and reactivity
10.1. Reactivity
There are no particular dangers of reaction with other substances under normal conditions of use.
10.2. Chemical stability
The product is stable under normal conditions of use and storage.
Concerning sodium percarbonate:
The product is stable under recommended conditions of use and storage (see Sections 7-8).
Thermal decomposition: Self-accelerating with O2 development from 50 ° C.
10.3. Possibility of hazardous reactions
Under normal use and storage conditions, no hazardous reactions are expected.
10.4. Conditions to Avoid
None in particular. However, be aware of the usual caution to chemicals.
10.5. Incompatible materials
Concerning sodium percarbonate:
Conditions to avoid: moisture, heat, acids, bases, heavy metal salts, reducing agents,
Organic materials, ammable substances.
Contamination from the mentioned substances causes decomposition, with increasing speed with
The temperature, and with the possibility of rapid generation of large volumes of oxygen and steam.
10.6. Hazardous decomposition products
Concerning sodium percarbonate:
The product is stable under recommended conditions of use and storage (see Sections 7-8).
Thermal decomposition: Self-accelerating with O2 development from 50 ° C.
SECTION 11. Toxicological information
In the absence of experimental toxicological data on the product, any dangers of the health product have been evaluated on the basis of the properties of
the substances contained, according to the criteria laid down by the classication standards for classication.
Consider therefore the concentration of the individual hazardous substances mentioned in Sect. 3, to assess the toxicological effects of exposure to the
product.
Acute effects: eye contact causes irritation; Symptoms may include: redness, edema, pain and tearing.
Skin contact may cause moderate irritation.
Swallowing may cause health disorders, including abdominal pain with burns, nausea and vomiting.
Acute effects: In case of skin contact, it is irritated with erythema, edema, dryness and cracking. Swallowing may cause health disorders, including
abdominal pain with burns, nausea and vomiting.