Installation guide

Installation Instructions

OUTSIDE TOP EXHAUST (Vertical Duct)

INSTALLATION OVERVIEW

A1. Attach Mounting Plate to _Mfll

A2. Prepare Top Cabinet

A3. Check Damper Operation

A4. Mount Microwave Oven

A5. Ac!j ust Exha ust Adaptor

A6. (_onnect Ductwork

I-_ ATTACH THE MOUNTING

PLATE TO THE WALL

Remove the template fl'om the rear wall. The

mounting plate must be secured to the wall using at

least 3 toggle bolts and one wood screw. The wood

screw inust engage a wall stud.

_ Remove the toggle wings fl'om the bolts.

_ Insert the bolts into the mounting plate

through the holes designated to go into drywall

and reattach the toggle wings to '_A"onto each bolt.

To use toggle bolts:

Mounting

Plate

ml,

Spacingfor Toggles

MoreThanWall

-,,,-I_,-,.-!_,_Thickness

ToggleWings

B01tEnd

_ Place the mounting plate against the wall and

insert the toggle wings into the holes in the wall

to mount the plate.

NOTE: Betore tightening the toggle bolts and the

wood screw(s), check again to be sure that the

mounting plate is level and centered leti to right.

CAUTION: Be careflfl to avoid pinching fingers

between the back of the mounting plate and the wall.

_ Tighten all bolts. Pull the plate away fl'om the

wall to hel I) tighten the bolts. Be careflfl not to

ove>torque the toggle bolts.