Installation guide

Installation Instructions

[_ MOUNT THE MICROWAVE

OVEN (cont.)

[] lnserl 2 self:aligning screws

through outer top cabinet

holes. "I_lrn lwo full turns on

each screw.

]Tighten center

screw completely.

[] Tighten the outer two screws to file lop of tile

microwave oven. (While tightening screws, hold

tile microwave oven in place _gainst tile wall and

the lop cabinet.)

1400and 1600Series

1800Series

[] Install grease filters. See the Owner's Manual

packed with the microwave.

INSTALLING THE

CHARCOAL FILTER

[] On 1400 and 1600 Series models, remove screws

on front of grille using a #1 Phillips screwdriver.

On 1800 Series models, reInove screws on top

fl'ont of grille using a #2 Phillips screwdriver.

[] Open the door.

[] ReInove tile grille.

On 1400 and 1600 Series models, pull the grille

straight off

On 1800 Series models, slide tile grille to tile left

and pull it straight of L

Charcoal

f Filter

[] Install the charcoal filter. When properly installed,

the wire mesh of the filter should be visible ffmn

the front.

[] Replace tile grille and tile screws.

[] Close 1he door.

insert mesh-sideup