Installation guide

Installation Instructions
ADAPTING MICROWAVE
BLOWER FOR OUTSIDE
BACK EXHAUST (cont.)
_] Rolate blower unit counterclockwise 180 °.
Before Rotation After Rotation
Microwave Microwave
[]Gently tile wires fi'oIll lhe
reIllove
grooves.
Reroute the wires through grooves on other side
of die blower unit.
Before Rerouting After Rerouting
Wires Routed Through Right Side Wires Routed Through Left Side
_] Roll the blower unit 90 ° lhat fan blade
so
openings are facing out tile back of the
lnicrowave.
Before Rolling After Rolling
Backof
Microwave
Microwave
[] Place tile blower unit back into the opening.
End
CAUTION: Do not pull or stretch the blower
unit wiring. Make sure the wires are not
pinched.
NOTE: The blower unit exhaust
openings should match exhaust
openings on rear of microwave oven.
] Secure Ihe blower unit to the Inicrowave with
the screw from Step 1.
BlowerPIate
I Backof
Microwave
BlowerMotor
Screw
[] Replace the blower plale in the same position
as before with the screw.
_ Altach dm exhaust adaplor to the rear of the
oven by sliding il inlo the guides at the top
center of the hack of the oven.
Adaptor
\
Backof
Microwave
/
Guide
Guide
- LockingTabs
Push in securely undl it is in dm lower locking
tabs. Take care to assure that the damper hinge
is installed so that it is at the lop and that the
damper swings fi'eely.
17