Specification

420513
Specification Revised 6/12
RA820DD – Hotpoint 20" Free-Standing Electric Range
Dimensions (in inches)
Listed by
Underwriters
Laboratories
KW Rating
240V 9.2
208V 6.9
Recommended acceptable electrical
outlet area. Orient the electrical
receptacle so the length is parallel
to the floor.
Floor
Outlet box
Cord
Wall Mounted
Wall
2-1/4"
Receptacle locations
Locally approved flexible service cord or
conduit must be used because terminals are
not accessible after range installation. See
shaded area in drawings for location of
electrical outlet box. Recommended outlet
locations allow range to be installed directly
against rear wall.
Models A B
C
(recommended) D
20" Wide 20" 20-3/8" 2" 41"
24" Wide 24" 24-3/8" 2" 41"
All GE ranges are equipped with
an Anti-Tip device. The installation
of this device is an important,
required step in the installation
of the range.
24
40-1/2
40-1/4*
Installation information
(in inches)
A10187-Installation information / hp_24_elec_range.eps
24" Electric range
dimensions
(in inches)
36
24
24-3/8
18" Min.
30
34
36"
Max.
13" Max.
2
2-1/2
5
5
5
25-1/2"
from wall
to front of
control panel.*
* Depth including
handle 25-9/16".
Depth to front
of control knobs
26-1⁄8".