Mode d’emploi EN FR Français, 1 English, 16 LAVE-VAISSELLE Sommaire FR Fiche de produit, 2 Précautions et conseils, 3 Sécurité générale Mise au rebut Economies et respect de l’environnement Installation, 4-5 Mise en place et mise à niveau Raccordements eau et électricité Caractéristiques techniques Conseils pour le premier lavage Description de l’appareil, 6 Vue d’ensemble Tableau de bord LFK 7M116 Charger les paniers, 7-8 Panier inférieur Panier supérieur Panier à couverts Plateau range-couvert
Fiche de produit FR Fiche de produit Marque HOTPOINT ARISTON Modèle LFK 7M116 Capacité nominale dans un environnement standard (1) 14 Classe énergétique sur une échelle de A+++ (faible consommation) à D (consommation élevée) A+ Consommation d''énergie par année en kWh (2) 293.0 Consommation d''énergie du cycle de lavage standard en kWh 1.03 Consommation d''energie en mode "off" en W 0.5 Consommation d''energie en mode "on" en W 5.0 Consommation d''eau par an en litres (3) 3080.
Précautions et conseils Cet appareil a été conçu et fabriqué conformément aux normes internationales de sécurité. Ces consignes sont fournies pour des raisons de sécurité, il faut les lire attentivement. Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, s’assurer qu’il accompagne bien l’appareil. Lire attentivement les instructions : elles fournissent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil.
Installation FR Conserver ce mode d’emploi pour pouvoir le consulter à tout moment. En cas de vente, de cession ou de déménagement, s’assurer qu’il accompagne bien l’appareil. Lire attentivement les instructions: elles contiennent des conseils importants sur l’installation, l’utilisation et la sécurité de l’appareil. En cas de déménagement, transporter l’appareil verticalement; si besoin est, l’incliner sur le dos.
Raccordement électrique Avant de brancher la fiche dans la prise de courant, s’assurer que: • la prise dispose de mise à la terre et est conforme aux normes; • la prise est bien apte à supporter la puissance maximale de l’appareil reportée sur la plaque signalétique fixée à la contre-porte (voir paragraphe Description du lave-vaisselle); • la tension d’alimentation est bien comprise entre les valeurs figurant sur la plaque signalétique de la contre-porte; • la prise est bien compatible avec la fiche de l’ap
Description de l’appareil FR Vue d’ensemble 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Charger les paniers Conseils Avant de charger les paniers, débarrasser la vaisselle des déchets plus importants et vider les verres et autres récipients. Pas besoin de rincer préalablement à l'eau courante.
FR Clayettes rabattables à inclinaison variable Les clayettes latérales peuvent être placées à trois hauteurs différentes afin d’optimiser la disposition de la vaisselle dans le panier. Les verres à pied peuvent être placés en position stable sur les clayettes rabattables en insérant la tige de leurs pieds dans les fentes prévues à cet effet.
Mise en marche et utilisation Mettre en marche le lave-vaisselle Charger le produit de lavage 1. Ouvrir l’arrivée d’eau. 2. Appuyer sur la touche ON-OFF : tous les voyants du bandeau de commande s’allument pendant quelques secondes. 3. Ouvrir la porte et doser le produit de lavage (voir « Charger Un bon résultat de lavage dépend aussi d’un bon dosage du produit de lavage. Un excès de produit de lavage ne lave pas mieux et pollue l’environnement. le produit de lavage »). 4.
Programmes FR Les données des programmes sont mesurées dans des conditions de laboratoire selon la norme européenne EN 50242. Selon les différentes conditions d’utilisation, la durée et les données des programmes peuvent être différentes. Le nombre ainsi que les types de programmes et d’options varient selon le modèle de lave-vaisselle.
Programmes spéciaux et Options Remarque : pour obtenir des performances optimales avec les programmes « Fast et Express 30' » il est conseillé de respecter le nombre de couverts indiqué. Pour consommer moins, utiliser le lave-vaisselle pleine charge. Note pour les laboratoires d’essai : pour toutes informations sur les conditions d’essai comparatif EN, s’adresser à : ASSISTENZA_EN_LVS@indesitcompany.
Produit de rinçage et sel régénérant FR N’utiliser que des produits de lavage spéciaux lavevaisselle. Ne pas utiliser de sel alimentaire ou industriel ni de produits vaisselle pour lavage à la main. Se conformer aux instructions reportées sur l’emballage. En cas d’utilisation d’un produit multifonction, pas besoin d’ajouter de produit de rinçage mais nous conseillons par contre d’ajouter du sel, surtout en cas d’eau dure ou très dure. (Se conformer aux instructions reportées sur l’emballage).
Entretien et soin Coupure de l’arrivée d’eau et du courant • Fermer le robinet de l'eau après chaque lavage pour éviter tout risque de fuites. • Débrancher la fiche de la prise de courant lors du nettoyage de l’appareil et pendant tous travaux d’entretien. Nettoyer le lave-vaisselle • Pour nettoyer l’extérieur et le bandeau de commande, utiliser un chiffon humide non abrasif. N’utiliser ni solvants ni détergents abrasifs.
Anomalies et remèdes FR Si l’appareil présente des anomalies de fonctionnement, procéder aux contrôles suivants avant de prendre contact avec le service d’assistance technique. Anomalies : Causes / Solutions possibles : Le lave-vaisselle ne démarre pas ou n’obéit pas aux commandes • Eteindre l’appareil à l'aide de la touche ON-OFF, rallumer au bout d’une minute environ et resélectionner le programme. • La fiche n’est pas bien branchée dans la prise de courant.
Service Avant d’appeler le service d’assistance technique: FR • Vérifier s’il est possible de résoudre l’anomalie soimême (voir Anomalies et remèdes). • Faire repartir le programme pour s’assurer que l’inconvénient a été résolu. • Si ce n’est pas le cas, contacter un Service d’Assistance Technique agréé. Ne jamais faire appel à des techniciens non agréés. Communiquer: • le type d’anomalie; • le modèle de l’appareil (Mod.); • le numéro de série (S/N).
Operating instructions DISHWASHER EN EN English,16 Contents Product Fiche, 17 Precautions and advice 18 General safety Disposal Saving energy and respecting the environment Installation and Assistance, 19-20 Positioning and levelling Connecting the water and electricity supplies Advice regarding the first wash cycle Technical data Assistance Description of the appliance, 21 LFK 7M116 Overall view Control panel Loading the racks, 22-23 Lower rack Cutlery basket Upper rack Start-up and use, 24 Star
Product Fiche EN Product Fiche Brand HOTPOINT ARISTON Model LFK 7M116 Rated capacity in standard place settings (1) 14 Energy efficiency class on a scale from A+++ (low consumption) to D (high consumption) A+ Energy consumption per year in kWh (2) 293.0 Energy consumption of the standard cleaning cycle in kWh 1.03 Power consumption of the off-mode in W 0.5 Power consumption of the left-on mode in W 5.0 Water consumption per year in litres (3) 3080.
Precautions and advice EN This appliance was designed and manufactured in compliance with international safety standards The following information has been provided for safety reasons and should therefore be read carefully. Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine. Please read these instructions carefully: they contain important information on installation, use and safety.
Installation Keep this instruction manual in a safe place for future reference. If the appliance is sold, given away or moved, please ensure the manual is kept with the machine, so that the new owner may benefit from the advice contained within it. Please read this instruction manual carefully: it contains important information regarding the safe installation, use and maintenance of the appliance.
EN Electrical connection Before inserting the plug into the electrical socket, make sure that: • The socket is earthed and complies with current regulations. • The socket can withstand the maximum load of the appliance, which is indicated on the data plate located on the inside of the door (see chapter entitled Description of the appliance). • The power supply voltage falls within the values indicated on the data plate on the inside of the door. • The socket is compatible with the plug of the appliance.
Description of the appliance Overall view EN 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11.
Loading the racks EN Tips Before loading the racks, remove all food residues from the crockery and empty liquids from glasses and containers. No preventive rinsing is needed under running water. Arrange the crockery so that it is held in place firmly and does not tip over; and arrange the containers with the openings facing downwards and the concave/convex parts placed obliquely, thus allowing the water to reach every surface and flow freely.
Tip-up compartments with adjustable position The side tip-up compartments can be positioned at three different heights to optimize the arrangement of crockery inside the rack. Wine glasses can be placed safely in the tip-up compartments by inserting the stem of each glass into the corresponding slots.
Start-up and use EN Starting the dishwasher 1. Turn the water tap on. 2. Press the ON/OFF button: all the indicator lights on the control panel will light up for a few seconds. 3. Open the door and pour in a suitable amount of detergent (see Measuring out the detergent). 4. Load the racks (see Loading the racks) and shut the door. 5. Select the wash cycle by turning the WASH CYCLE SELECT knob clockwise: align the notch on the knob with the number or symbol representing the desired wash cycle.
Wash cycles Wash-cycle data is measured under laboratory conditions according to European Standard EN 50242. Based on the different conditions of use, the wash-cycle duration and data can change. EN The number and type of wash cycles and options may vary depending on the dishwasher model.
Special wash cycles and Options EN Notes: Optimum performance levels when using the “Fast" and "Express 30’” cycles can be achieved by respecting the specified number of place settings. To reduce consumption even further, only run the dishwasher when it is full. Note for Test Laboratories: for information on comparative EN testing conditions, please send an email to the following address: ASSISTENZA_EN_LVS@indesitcompany.
Rinse aid and refined salt Only use products which have been specifically designed for dishwashers. Do not use table/industrial salt or washing-up liquid. Follow the instructions given on the packaging. If using a multi-functional product it is not necessary to add any rinse aid. However, we recommend that you add salt, especially if you live in an area where the water is hard or very hard. (Follow the instructions given on the packaging).
Care and maintenance EN Shutting off the water and electricity supplies • Turn off the water tap after every wash cycle to avoid leaks. • Always unplug the appliance when cleaning it and when performing maintenance work. Cleaning the dishwasher • The external surfaces of the machine and the control panel can be cleaned using a non-abrasive cloth which has been dampened with water. Do not use solvents or abrasive products.
Troubleshooting Whenever the appliance fails to work, check for a solution from the following list before calling for Assistance. Problem: Possible causes / Solutions: The dishwasher does not start or cannot be controlled • Switch off the appliance by pressing the ON/OFF button, switch it back on after approximately one minute and reset the program. • The appliance has not been plugged in properly. • The dishwasher door has not been shut properly. The door won’t close • The lock was released.
EN 30
EN 31
195112356.