Instruction for Use

ManualsBrandsHotpoint ManualsDomestic AppliancesIDV 65 (AUS)

AUS

English,1

Contents

Installation, 2-3

Where to install the tumble dryer

Ventilation

Electrical connections

Levelling the tumble dryer

Before you start your dryer

Description of the tumble dryer, 4

Front side

Rear side

Control panel

How to carry out a drying cycle, 5

Starting a drying programme

Drying settings, 6-7

Programmes

Timed Drying

Drying programmes and options

Laundry, 8

Sorting laundry

Care labels

Special items

Warnings and suggestions, 9-10

General safety

Information on recycling and disposal

Saving energy and respecting the environment

Care and maintenance, 11

Disconnecting the power supply

Cleaning the filter after each cycle

Checking the drum after each cycle

Cleaning the tumble dryer

Troubleshooting, 12

Assistance, 13

Spare parts

AUS

IDV 65

 This symbol reminds you to read this instruction manual.

 Keep this manual at hand for immediate reference whenever

necessary. Always store this manual close to the tumble dryer and

remember to pass it on to any new owners when selling or

transferring the appliance, so they may familiarise with the warnings

and suggestions herein contained.

 Read these instructions carefully: the following pages contain

important information on installation and useful suggestions for

operating the appliance.

Instruction manual

TUMBLE DRYER

Summary of content (16 pages)

PAGE 1
Instruction manual TUMBLE DRYER Contents AUS English,1 AUS Installation, 2-3 Where to install the tumble dryer Ventilation Electrical connections Levelling the tumble dryer Before you start your dryer Description of the tumble dryer, 4 Front side Rear side Control panel How to carry out a drying cycle, 5 Starting a drying programme Drying settings, 6-7 IDV 65 Programmes Timed Drying Drying programmes and options Laundry, 8 Sorting laundry Care labels Special items Warnings and suggestions, 9-10 Ge
PAGE 2
Installation Install the dryer far from gas ranges, stoves, radiators or hobs, as flames may damage it. If the dryer is installed below a worktop, ensure there are 10 mm between the upper panel of the dryer and any objects above it, and 15 mm between the sides 15 mm 15 mm of the machine and the walls or furniture units adjacent to it. This ensures adequate air circulation. Make sure the air inlets on the rear panel are not blocked or obstructed.
PAGE 3
Electrical connections Before plugging the appliance into the socket, check the following: Make sure your hands are dry. The socket must have an earth connection. The socket must be able to withstand the machines maximum power output as indicated on the data plate (see Description of the tumble dryer). The power supply voltage must fall within the values indicated on the data plate (see Description of the tumble dryer). The socket must be compatible with the machines plug.
PAGE 4
Description of the tumble dryer Front side Rear side AUS Control panel Serial number and model number Drum Filter Control panel Air inlet Rating Plate Caution, high temperature Connection for ventilation hose Acrylics or Cotton Synthetics button Start button PROGRAMME and Drying time selector knob Programme and Drying time selector knob This is used to set programme or the drying time: turn the knob in a clockwise direction until the indicator is set to the desired programme or drying time (
PAGE 5
How to carry out a drying cycle Starting a drying programme AUS 1. Plug the dryer into the electrical socket. 2. Sort your laundry according to fabric type (see Laundry). 3. Open the door and make sure the filter is clean and in place (see Maintenance). 4. Load the machine and make sure that the items are not in the way of the door seal. Close the door. 5. Choose a drying programme by checking the Programmes table (see Programmes) as well as the indications for each type of fabric (see Laundry).
PAGE 6
Drying settings Programmes AUS Programme What it does How to set it A Dries completely: your clothes are Automatic ready to be worn. For Large loads (from 3 to 6 kg) of Drying . (large loads) Cotton B Automatic Drying (average loads) Easy Iron Timed Drying (Up to 120 minutes) Refresh Dries completely: your clothes are ready to be worn. For Average loads (from 1 to 3 kg) of Cotton , polycotton, or synthetics . Notes 1. Select HIGH HEAT by pressing the "Acrylics or Cotton Synthetics" button. 2.
PAGE 7
Drying programmes and options AUS Refresh A short programme suitable for refreshing fibres and garments through the emission of cool air. It lasts about 10 minutes. As this is not a drying programme, it is not to be used for garments that are still wet. Easy Iron Easy Iron is a short 10 minute programme (8 minutes of heat followed by a 2 minutes cool tumble period) which fluffs the fibres of clothing that has been left in the same position/location for an extended period of time.
PAGE 8
Laundry AUS Sorting laundry Care labels Check the symbols on the care labels of the various garments to verify whether the garments can be safely tumble dried. Sort laundry according to the type of fabric. Empty all pockets and check for loose buttons. Close zips and hooks and fasten belts and strings without tightening them. Wring out garments to remove the maximum amount of water possible. Always check the care labels, especially when placing garments in the tumble dryer for the first time.
PAGE 9
Warnings and suggestions This appliance was designed and manufactured in compliance with current international safety standards. The following information is provided for safety reasons and must be read carefully. General safety The final part of a tumble dryer cycle occurs without heat (cooling cycle) to ensure that the laundry is not damaged due to excessive temperatures.
PAGE 10
AUS Do not tumble dry plastic articles such as shower caps, waterproof textiles or babies waterproof covers, polythene, or paper. Do not tumble dry rubber-backed articles, clothes or pillows fitted with foam rubber pads, pillows, galoshes and rubber-coated tennis shoes. Remove all objects from pockets, especially lighters (risk of explosion). WARNING: Never stop the dryer before the end of the drying cycle unless all items have been quickly removed and hung in order to dispel heat.
PAGE 11
Care and maintenance Disconnecting the power supply Disconnect the dryer when not in use or during cleaning and maintenance operations. AUS Cleaning the filter after each cycle The filter is a fundamental component of the dryer: its function is to collect lint and fluff that form during drying. Clean the filter once drying is completed, by rinsing it under running water or cleaning it with a vacuum cleaner.
PAGE 12
Troubleshooting AUS If you feel that the dryer is not working properly, consult the following troubleshooting suggestions before contacting the Technical Assistance Centre (see Assistance). Problem: Possible causes / Solutions: The dryer does not start. The plug has not been inserted far enough into the socket to make contact. There has been a power cut. The fuse has blown. Try connecting another appliance to the same socket.
PAGE 13
Assistance Before contacting the Technical Assistance Centre: Spare parts Follow the troubleshooting guide to check whether problems can be solved personally (see Troubleshooting). If not, switch the dryer off and contact the Technical Assistance Centre closest to you. This dryer is a complex machine. Attempting to repair it personally or employing an unqualified service agent may put the safety of people at risk, damage the machine or invalidate the spare parts guarantee.
PAGE 14
AUS 14
PAGE 15
AUS 15
PAGE 16
195077534.