Specification

ManualsBrandsHotpoint ManualsAppliances6.2 cu. ft. vented Electric Dryer in White with Auto Dry

HTX26EASWWW

Hotpoint® 6.2 Cu. Ft. Capacity Electric Dryer with up to 120 Ft. Venting and Shallow Depth

DRYER DIMENSIONS (IN INCHES)

Speciﬁcation Revised 2/24

EXHAUST OPTIONS: 4-way via rear, right, left and bottom.

CIRCUIT REQUIREMENTS: An individual, properly-grounded

branch circuit, protected by a 30-amp circuit breaker or

a time-delay fuse, is required.

ELECTRIC DRYER RATING: 240V, 5600W, 60Hz, 24 Amp,

208V, 4400W, 60Hz, 22 Amp

INSTALLATION INFORMATION: For complete information,

see installation instructions packed with product for current

dimensional data.

SPECIAL INSTALLATION REQUIREMENTS

ALCOVE OR CLOSET INSTALLATION:

- If your dryer is approved for installation in an alcove or closet,

it will be stated on a label on the dryer back.

- The dryer MUST be exhausted to the outside.

- Minimum clearances between dryer cabinet and adjacent walls

or other surfaces are: 0" either side, 1" front, top and rear.

- Closet doors must be louvered or otherwise ventilated and must

contain a minimum of 60 sq. in. of open area equally distributed.

If this closet contains both a washer and a dryer, doors must

contain a minimum of 120 sq. in. of open area equally distributed.

BATHROOM OR BEDROOM INSTALLATION:

- The dryer MUST be exhausted to the outdoors.

- The installation must conform with the local codes, or in the

absence of local codes, with the National Electric Code and

National Fuel Gas Code, ANSI Z223 for gas dryers.

MINIMUM CLEARANCES OTHER THAN ALCOVE OR

CLOSET INSTALLATION:

Minimum clearances to combustible surfaces: 0" both sides, 1" rear.

Listed by

Underwriters

Laboratories

22 3/8"

26 5/8"

3 7/8"

1 7/8"

3 1/8"

37 1/2"

44"

27"

4 7/8"

POWER CORD 4 3/4"

11 3/4"

SIDE VIEW

REAR VIEW

*Order online at GEApplianceparts.com, 24 hours a day or by phone at 877.959.8688 during normal business hours.

For answers to your Monogram, Café™, GE Proﬁle™ or GE Appliances product questions, visit our website

at geappliances.com or call GE Answer Center® Service, 800.626.2000.

POWER CORDS: GE Appliances strongly recommends the use of factory

speciﬁed parts. Select the power cord to ﬁt your installaton requirements.*

NOTE: If the dryer circuit is on a circuit protected by a GFCI breaker, then

3-wire installation is not permitted. Hose wiring and dryer must be

conﬁgured for 4-wire.

Part Number

WX9X2

WX9X3

WX9X4

WX9X18

WX9X19

WX9X20

Type

3-Prong

4-Prong

Length

4 Feet

5 Feet

6 Feet

4 Feet

5 Feet

6 Feet

Amperage

Summary of content (3 pages)

PAGE 1
HTX26EASWWW Hotpoint® 6.2 Cu. Ft. Capacity Electric Dryer with up to 120 Ft. Venting and Shallow Depth DRYER DIMENSIONS (IN INCHES) 22 3/8" 26 5/8" 27" POWER CORD 4 3/4" EXHAUST OPTIONS: 4-way via rear, right, left and bottom. 11 3/4" CIRCUIT REQUIREMENTS: An individual, properly-grounded branch circuit, protected by a 30-amp circuit breaker or a time-delay fuse, is required.
PAGE 2
HTX26EASWWW Hotpoint® 6.2 Cu. Ft. Capacity Electric Dryer with up to 120 Ft. Venting and Shallow Depth For complete information, see installation instructions packed with your dryer. ACCESSORIES* GE Part Number Description DUCTING MATERIALS: For best performance, this dryer should be vented with 4" diameter all-rigid metal exhaust duct. If rigid metal duct cannot be used, then UL-listed flexible metal (semi-rigid) ducting can be used (Kit WX08X10077).
PAGE 3
HTX26EASWWW Hotpoint® 6.2 Cu. Ft. Capacity Electric Dryer with up to 120 Ft. Venting and Shallow Depth FEATURES AND BENEFITS AutoDry – AutoDry monitors the internal air temperature to determine the ideal drying time, protecting your garments from overdrying. Powerful Venting & Flexible Installation – Powerful airflow offers long-lasting performance from lint build-up and offers venting solutions up to 120 feet for greater installation flexibility.