Specifications

For answers to your Monogram, GE Café
™
Series, GE Profile
™
Series or
GE Appliances product questions, visit our website at geappliances.com
or call GE Answer Center
®
Service, 800.626.2000.
Specification Revised 1/17
HDA2100H
Hotpoint
®
Built-In Dishwasher
This wall area
must be free of
pipes or wires
Countertop
4"
6"
Hot
water
line on
left
4"
4"
2"
Plumbing and electrical
service must enter
inside shaded area
24"
from wall
24" MIN.
90°
19" MIN.
from wall
24"
MIN.
6"
34" to 34-3/4"
Underside
of countertop
to floor
5" 5"
90°
Electrical
wiring on
right
Electrical
wiring is
3" from
cabinet
25-3/4"
MAX.
24"
23-3/8"
34" MIN.
adj. to 35"
24-3/4"
21-1/2"
3-1/4"
4" (Adjustable)
Listed by
Underwriters
Laboratories
DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)
ELECTRICAL RATING
Voltage AC................................................................120
Hertz..........................................................................60
Total connected load amperage................................8.6
Calrod
®
heater watts max........................................500
For use on adequately wired 120-volt, 15-amp circuit
having 2-wire service with a separate ground wire.
This appliance must be grounded for safe operation.
NOTE: Dishwasher must not be installed more than 10 feet
from sink for proper drainage. All plumbing and electrical
work must be in accordance with local codes. Dishwasher
includes drain hose and leveling legs.
INSTALLATION INFORMATION: Before installing,
consult installation instructions packed with product for
current dimensional data.