Health Safety & Environmental
2
from the power supply by unplugging it if plug is
accessible, or by a multi-pole switch installed upstream
of the socket and the appliance must be earthed, in
conformity with national electrical safety standards.
Do not use extension leads, multiple sockets or
adapters. The electrical components must not be
accessible to the user after installation. Do not use
the appliance when you are wet or barefoot. Do not
operate this appliance if it has a damaged power
cable or plug, if it is not working properly, or if it has
been damaged or dropped.
If the supply cord is damaged, it must be replaced
with an identical one by the manufacturer, its service
agent or similarly qualied persons in order to avoid
a hazard - risk of electrical shock.
If the tted plug is not suitable for your socket outlet,
contact a qualied technician. Do not pull the power
supply cable. Do not immerse the mains cord or plug
in water. Keep the cord away from hot surfaces.
ELECTRICAL CONNECTION FOR GREAT
BRITAIN AND IRELAND ONLY
Fuse replacement.
If the mains lead of this appliance is tted with a
BS 1363A 13amp fused plug, to change a fuse in
this type of plug use an A.S.T.A. approved fuse to
BS1362 type and proceed as follows:
1. Remove the fuse cover (A)
and fuse (B).
2. Fit replacement 13A fuse into
fuse cover.
3. Re t both into plug.
Important:
The fuse cover must be re tted when changing a
fuse and if the fuse cover is lost the plug must not be
used until a correct replacement is tted.
Correct replacement are identi ed by the colour
insert or the colour embossed in words on the base
of the plug. Replacement fuse covers are available
from your local electrical store.
For the Republic of Ireland only
The information given in respect of Great Britain will
frequently apply, but a third type of plug and socket
is also used, the 2-pin, side earth type.
Socket outlet / plug (valid for both countries)
If the tted plug is not suitable for your socket
outlet, please contact After-sales Service for further
instruction. Please do not attempt to change plug
yourself. This procedure needs to be carried out
by a quali ed technician in compliance with the
manufactures instructions and current standard
safety regulations.
CLEANING AND MAINTENANCE
WARNING: Ensure that the appliance is switched
o and disconnected from the power supply before
performing any maintenance operation. To avoid risk
of personal injury use protective gloves (risk of lac-
eration) and safety shoes (risk of contusion); be sure
to handle by two persons (reduce load); never use
steam cleaning equipment (risk of electric shock).
Non-professional repairs not authorized by the
manufacturer could result in a risk to health and
safety, for which the manufacturer cannot be held
liable. Any defect or damage caused from non-
professional repairs or maintenance will not be
covered by the guarantee, the terms of which are
outlined in the document delivered with the unit.
DISPOSAL OF PACKAGING MATERIALS
The packaging material is 100% recyclable and
is marked with the recycle symbol . The various
parts of the packaging must therefore be disposed of
responsibly and in full compliance with local authority
regulations governing waste disposal.
DISPOSAL OF HOUSEHOLD APPLIANCES
This appliance is manufactured with recyclable
or reusable materials. Dispose of it in accordance
with local waste disposal regulations. For further
information on the treatment, recovery and recycling
of household electrical appliances, contact your local
authority, the collection service for household waste
or the store where you purchased the appliance. This
appliance is marked in compliance with European
Directive 2012/19/EU, Waste Electrical and Electronic
Equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent negative
consequences for the environment and human health.
The symbol on the product or on the accompanying
documentation indicates that it should not be
treated as domestic waste but must be taken to
an appropriate collection center for the recycling of
electrical and electronic equipment.
ENERGY SAVING TIPS
ECO program is suitable to clean normally soiled
tableware, that for this use, it is the most ecient
program in terms of its combined energy and water
consumption, and that it is used to assess compliance
with the EU Ecodesign legislation.
Loading the household dishwasher up to the capacity
indicated by the manufacturer will contribute to energy
and water savings. The manual pre-rinsing of tableware
items leads to increased water and energy consumption
and is not recommended. Washing tableware in a
household dishwasher usually consumes less energy
and water in the use phase than hand dishwashing
when the household dishwasher is used according to
the manufacturer’s instructions.
400011410693B
02/2021 as - Xerox Fabriano
B
A