Dimensions Guide

HDA3600K
Hotpoint
®
Built-In Dishwasher
For answers to your Hotpoint product questions, visit our website at
hotpoint.com or call 800.626.2000.
Listed by
Underwriters
Laboratories
Specification Created 6/18
DIMENSIONS AND INSTALLATION INFORMATION
ELECTRICAL RATING
Voltage AC.................................................120
Hertz...........................................................60
Total connected load amperage................8.6
Calrod
®
heater watts................................500
For use on adequately wired 120-volt,
15-amp circuit having 2-wire service
with a separate ground wire. This appliance
must be grounded for safe operation.
NOTE: Dishwasher must not be installed more than 10 feet
from sink for proper drainage. All plumbing and electrical work
must be in accordance with local codes. Dishwasher includes
drain hose and leveling legs.
INSTALL ATION INFORMATION: Before installing, consult
installation instructions packed with product for current
dimensional data.
25-3/4"
MAX.
24"
23-3/8"
34" MIN.
adj. to 35"
24-3/4"
21-1/2"
3-1/4"
4" (Adjustable)
This wall area
must be free of
pipes or wires
Countertop
4
6
Hot
water
line on
left
44
2
Plumbing and electrical
service must enter
inside shaded area
24" From wall
24" MIN.
90°
19" MIN. from wall
24"
MIN.
6
34" to 34-3/4"
Underside
of countertop
to floor
5 5
90°
Electrical
wiring on
right
Electrical
wiring is
3" from
cabinet