Daily Reference Guide

400011565962
Policies, standard documentation, ordering of spare parts and additional product information can be
found by:
• Visiting our website docs . hotpoint . eu and parts - selfservice . whirlpool . com
• Using QR Code
• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When
contacting our After-sales Service, please state the codes provided on your product's identication plate.
The model information can be retrieved using the QR-Code indicated on the energy label. The label also includes
the model identier that can be used to consult the https://eprel.ec.europa.eu database portal.
* Available only on certain models
ALARM TABLE
Alarm type Signal Cause Cure
Door open alarm. The acoustical alarm is activated.
Alarm icon on the display blinks
fast and the internal lamp blinks
slowly.
The refrigerator door has remained
open for more than two minutes.
The buzzer will stop sounding
when you shut the door.
Temperature alarm. The acoustical alarm is activated.
Alarm icon on the display blinks
fast. “A1” is displayed instead of the
freezer temperature.
The doors do not close properly
or the seals are damaged. The
doors are open too frequently. The
refrigerator or the freezer have
been over-lled.
The temperature inside the freezer
is too high.
The freezer will maintain a
temperature of around 0°C so that
the food will not refreeze, allowing
you to eat it within 24 hours or to
refreeze it after it has been cooked.
To switch o the buzzer, open and
close the appliance door or press
the + and – freezer temperature
adjustment buttons once.
Press these buttons a second time
to switch o the Alarm icon on the
display and set the value on the
Freezer display.
Temperature alarm. The acoustical alarm is activated.
Alarm icon on the display blinks
fast. “A2” is displayed instead of
the freezer temperature.
The doors do not close properly
or the seals are damaged. The
doors are open too frequently. The
refrigerator or the freezer have
been over-lled.
The temperature of the freezer is
dangerously high: the food inside
must not be eaten.
To switch o the buzzer, open and
close the appliance door or press
the + and – freezer temperature
adjustment buttons once.
Press these buttons a second time
to switch o the Alarm icon on the
display and set the value on the
Freezer display.