Setup and user guide

3
EN
SOME OF THE FUNCTIONAL SOUNDS
YOU MIGHT HEAR
A hissing sound when switching on the
appliance for the rst time or after a long pause.
A gurgling sound when refrigerant uid enters
into the pipes.
BRRR sound is from the compressor running.
Buzzing sound when water valve or fan start
working.
A cracking sound when compressor starts. The CLICK is from the thermostat which
adjusts how often the compressor is running.
TROUBLESHOOTING GUIDE
Problem Possible Cause Solution
THE APPLIANCE TEMPERATURE IS TOO
HIGH
There could be various causes (see “Solutions”) Make sure that the condenser (back the
appliance) is free of dust and u.
› Make sure that the door properly closed.
› Make sure that the door seals properly tted.
› On hot days or if the room is warm, the motor
naturally runs longer.
› If the appliance door has been left open for a
while or if large amounts of food have been
stored, the motor will run longer in order to
cool down the interior of the appliance.
THE MOTOR SEEMS TO RUN TOO MUCH Motor running time depends on dierent
things: number of door openings, amount of
food stored, temperature of the room, setting
of the temperature controls.
› Make sure that the appliance controls are
correctly set.
› Check if there is not a large amount of food
been added to the appliance.
› Check that the door is not opened too often.
› Check that the door close properly.
THE DOORS DO NOT OPEN AND CLOSE
PROPERLY
There could be various causes (see “Solutions”) › Check that food packages are not blocking
the door.
› Check that the internal parts or automatic
ice maker are not out of position.
Check that the door seals are not dirty or sticky.
› Ensure the appliance is level.