Daily Reference Guide

ManualsBrandsHotpoint ManualsAppliancesFridge Freezer - White

Quick guide

* Available only on certain models

THANK YOU FOR BUYING A HOTPOINT PRODUCT

In order to receive a more complete assistance, please

Before using the appliance carefully read the Safety

Instruction.

FIRST TIME USE

After installation, wait at least two hours before connecting the

appliance to the power supply. Once connected, it will start working

automatically. The ideal temperature settings are preset from the

factory.

After turning the appliance on, wait 4-6 hours for it to reach the correct

food storage temperature.

CONTROL PANEL

453

1. Freezer operation button

2. Super Freeze button

3. Super Freeze indicator light

4. Freezer temperature indicator light

5. Fridge temperature indicator light

6. Active oxygen indicator light

7. Active oxygen button

8. Refrigerator operation button

ON/OFF

To switch on/switch o the product press both Freezer operation

button and Super Freeze button by 3 seconds.

FREEZER TEMPERATURE SETTING

To regulate the temperature in the freezer compartment use Freezer

operation button. The temperature of the freezer is consisted with 4

levels as indicated on serigraphy (signaled by led light).

Recommended setting for the freezer is -18°C.

SUPER FREEZE FUNCTION

This function is recommended for freezing fresh food. Fresh food

should be frozen as quickly as possible, for the best possible

preservation and for keeping its nutritional value. Press the Super

Freeze button when you need to freeze fresh food; the Super Freeze

indicator will come on.

We recommend you press the Super Freeze button 24 hours before

putting the food in, in order to prepare the freezer compartment for

the best possible freezing conditions. We recommend you use the

bottom drawer to maximize the freezing capacity.

The Super Freeze function is automatically deactivated after 48 hours,

or you can disable it manually by pressing the Fast Freeze button.

FRIDGE TEMPERATURE SETTING

The temperature of the fridge is consisted with 4 levels as indicated on

serigraphy (signaled by led light). To regulate the temperature of the

refrigerator compartment use Refrigerator operation button.

Recommended setting for the refrigerator compartment is +4°C.

ACTIVE OXYGEN FUNCTION

Activate or deactivate Active Oxygen function by pressing the Active

Oxygen button. The light of the Active Oxygen is on when activated.

This device releases ozone molecules inside the refrigerator. Ozone is a

natural substance which reduces their proliferation of microorganisms

while limiting unpleasant odors.

There may be a slight distinctive smell inside the refrigerator.(The very

same smell can sometimes be detected during a storm, due to the

ozone produced as the charge in the lightning bolts is released, this

is completely normal.)The amount produced by the device is dened

within the safe range to use the product.

Note: The Active Oxygen together with Refrigerator operation button can

enable ECOPlus function.

ECOPLUS FUNCTION

The ECOPlus function can be enabled to optimize energy consumption.

Press and hold down the Active Oxygen together with Refrigerator

operation button simultaneously for at least 6 seconds to enable this

function. On enabling the function, 4 indicator lights will go on for 2

seconds: Active Oxygen light, Super Freeze light and two temperature

lights - one for the refrigerator and one for the freezer.

After 5 seconds the interface will enter the energy saving mode and

the indicator lights will go o. The interface stays o even when the

door is opened. Just press any button to switch it on again. Press the

adjustment buttons to change the temperature.

To disable the ECOPlus function, switch o the product.

In humid environments, when the ECOPlus function is enabled, slight

condensation may form on the doors; normal operating conditions are

restored when the function is disabled.

LED LIGHT

This product contains a light source of energy eciency class F.

If the LED light system does not work, please contact the Service to

replace it.

Important: The refrigerator compartment light switches on when

the refrigerator door is opened. If the door is kept open for more than

8 minutes the light will be automatically switched o.

Summary of content (4 pages)

PAGE 1
EN Quick guide THANK YOU FOR BUYING A HOTPOINT PRODUCT In order to receive a more complete assistance, please register your product on www‌.‌hotpoint‌.‌eu/‌register Before using the appliance carefully read the Safety Instruction. FIRST TIME USE After installation, wait at least two hours before connecting the appliance to the power supply. Once connected, it will start working automatically. The ideal temperature settings are preset from the factory.
PAGE 2
HOW TO STORE FRESH FOOD AND BEVERAGES Legend a) TEMPERATE ZONE Suggested for storage of tropical fruit, cans, drinks, eggs, sauces, pickles, butter, jam * b) COOL ZONE Suggested for the storage of cheese, milk, daily food, delicatessen, yogurt COOLEST AREA a) Suggested for storage of cold cuts, desserts, meat and fish b) Suggested for storage of meat and fish.
PAGE 3
GENERAL INFORMATION The drawers, baskets, and shelves should be kept in their current position unless otherwise specified in this quick guide. The light system inside the refrigerator compartment uses LED lights, which provide better lighting and use less energy than traditional bulbs. Doors and lids of the refrigerator should be removed before disposal, to avoid children or animals getting trapped inside. TROUBLESHOOTING What to do if... Possible reasons Solutions The appliance is not working.
PAGE 4
Policies, standard documentation, ordering of spare parts and additional product information can be found by: • Visiting our website docs‌.‌hotpoint‌.‌eu and parts‌-‌selfservice‌.‌whirlpool‌.‌com • Using QR Code • Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When contacting our After-sales Service, please state the codes provided on your product's identification plate. The model information can be retrieved using the QR-Code indicated on the energy label.