Instruction for Use

Rinse aid

Only use products which have been specifically

designed for dishwashers.

Do not use washing-up liquid.

Follow the instructions given on the packaging.

If using a multi-functional product it is not necessary to

add any rinse aid.

If you do not add rinse aid, the LOW RINSE AID

indicator light will stay lit.

Measuring out the rinse aid

Rinseaidmakesiteasierforthecrockerytodry,aswater

runs off surfaces more readily and therefore does not leave

streaks or marks.

The rinse aid dispenser should be filled:

•WhentheLOWRINSEAID* indicator light on the control

panel is illuminated;

1. Open the dispenser by turning the lid (G) in an

anticlockwise direction.

2.Pourintherinseaid,makingsureitdoesnotoverflowfrom

the dispenser. If this happens, clean the spill immediately

with a dry cloth.

3. Screw the lid back on.

NEVER pour the rinse aid directly into the appliance tub.

Adjusting the amount of rinse aid

If you are not completely satisfied with the drying results, you

mayadjustthequantityofrinseaidused.Useascrewdriver

to turn the dosage adjuster (F) to one of the 6 pre-set

positions (the default position is set to 4):

•If thereare streakson the crockery, set the adjustment

devicetoalowernumber(1-3).

•If drops ofwater remain on the crockery or if thereare

limescale marks present after the cycle has finished, set

the adjuster to a higher number (4-6).

* Only available in selected models.