Instruction for Use

EN
11
Special wash cycles
and Options
Notes:
Optimum performance levels when using the “Rapid” cycle
can be achieved by respecting the specified number of place
settings.
The Eco wash cycle complies with regulation AS/NZS 2007.
Although it has a longer duration than other wash cycles, it uses
less energy and is less harmful to the environment.
Note for Test Laboratories: forinformationoncomparativeEN
testing conditions, please send an email to the following address:
[e-mail]
Wash options
The OPTIONS may only be set, modified or reset after
the wash cycle has been selected and before the Start/
Pause button has been pressed.
Only the options which are compatible with the type of wash
cycle set may be selected. If an option is not compatible
with the selected was cycle (see Table of wash cycles) , the
correspondingLEDflashesrapidly3times.
If an option is selected which is incompatible with another
option or wash cycle selected previously, the incompatible
option light will flash 3 times and switches off, while the most
recently selected setting remains lit.
To deselect an option which has been set by mistake, press
the corresponding button again.
Delayed start
It is possible to delay the start time of the wash
cycle by 3, 6 or 9 hours.
1: After selecting the desired wash cycle and any other
options, press the DELAYED START button. the indicator
light will illuminate.
2:Selectthedesireddelay timebypressingtheDelayed
Start button repeatedly; the wash phase (3 hours), the dry-
ingphase(6hours)andend(9hours)indicatorlightswill
illuminate in succession.
If the Delayed Start button is pressed again, the option is
deselected and the indicator light switches off.
3. The countdown will begin once the Start/Pause button
has been pressed. The selected delay period indicator light
flashesandtheStart/Pausebuttonstopsflashing(thelight
becomes fixed instead).
3.Oncethistimehaselapsed,theDELAYEDSTARTindicator
light switches off and the wash cycle begins.
The Delayed Start function cannot be set once a wash
cycle has been started.
Half load
If there are not many dishes to be washed, a half
load cycle may be used in order to save water,
electricity and detergent. Select the wash cycle and press
the HALF LOAD button: the indicator light will illuminate.
Remember to halve the amount of detergent.
It is better to use powder detergent in this case.
* Only available in selected models.