Instruction manual

Catalitic Cleaning
In some models, the most exposed internal vertical sides
of the oven are coated with porous enamel, which is
called catalytic enamel. When heated, this enamel
destroys fat particles given off by the food. This
„oxidation” of the fat particles occurs when the
temperature of the sides exceeds 170°C. The porous
quality of the catalytic enamel increases the surface area
where the exchange vital to the oxidation of the fats
takes place.
*
*
Only in s
ome models
If there is still grime on the catalytic surfaces after
the cooking programme has ended, leave the empty
oven on with the door shut, turning the temperature
adjustment knob to its maximum setting. Leave the
oven like this for a period of time between 60 and 90
minutes, according to how much dirt was left inside. The
cleaning process for more stubborn food residues may
be quickened by using hot water and a soft brush.
*HQWO\HDVHWKHJODVVXSZDUGV
DQGUHPRYHIURPWKHGRRU
5HSHDWZLWKWKHFHQWUHGRRUJODVV
LIILWWHG
1. Open the door fully and unscrew the two screws
securing the glass panel so that the securing bra-
ckets can be turned. There is no need to remove
the screws completely.
2. Turn the brackets so
that the glass can be
removed and cleaned
at the sink (Fig. 1.).
3. The inside of the outer door glass can now be
cleaned while still fitted to the cooker.
5HPRYHWKH,QQHU*ODVVDV)ROORZV
5HPRYHWKHVFUHZVIURPERWKVLGHV
RIWKHGRRU
*HQWO\HDVHWKHWRSWULPDZD\IURP
WKHGRRU%HFDUHIXOQRWWR
EUDFNHWVDQGUXEEHUEXIIHUVLIILWWHG
ORVHWKHPHWDO
Care and Cleaning
NEVER OPERATE THE COOKER
WITHOUT THE INNER DOOR GLASS IN
POSITION.
Refit the door inner glass as follows.
1. NOTE: The inner door glass has a special reflective
coating on one side. Replace the door inner glass
so that the statement: „IMPORTANT THIS FACE
TOWARDS THE OVEN” can be read from the inner
side of the door.
2. Turn the two securing
brackets back to their
original position to
retain the glass and
tighten the screws (Fig. 2.)