Extended technical drawing

ACP 778 C/BA
12NC/Fx: F155810 GTIN (EAN) code:
5054645558100
DIMENSION MEASURE
APPLIANCE
Product width 770 mm
Product depth 510 mm
Radius of product corner 2 mm
Product height (MAX protrusion from the worktop) 4 mm
Underneath the bearing area of the appliance 53 mm
Distance between cut out and top frontal projection 10 mm
Distance between cut out and top lateral projection 10 mm
Plateau thickness 4 mm
Gas outlet positioning N/A
Gas outlet X positioning 0 mm
Gas outlet Y positioning 0 mm
Power cable With
product
Power cable positioning Rear right
CUT OUT
MIN front distance from cut-out to end worktop 0 mm
MIN rear distance from cut out to wall/furniture 50 mm
MIN lateral distance from cut out to wall/furniture 100 mm
MIN height from worktop to above furniture 400 mm
MIN cut out width 750 mm
MAX cut out width 752 mm
MIN cut out depth 490 mm
MAX cut out depth 492 mm
MIN cut out radius 6.5 mm
MAX cut out radius 8 mm
FLUSH INSTALLATION
Indicates whether a flush installation is possible. Default is "N" No
MIN Milling rabbet width 0 mm
MAX Milling rabbet width 0 mm
MIN Milling rabbet depth 0 mm
MAX Milling rabbet depth 0 mm
Milling rabbet thickness 0 mm
Radius milling rabbet 0 mm
Flush installation KIT (2) N/A
Indicates the minum worktop thickness with standard installation for gas 0 mm
Indicates the maximum worktop thickness with standard installation for gas 0 mm
Indicates the minum worktop thickness with flush installation for gas 0 mm
Indicates the maximum worktop thickness with flush installation for gas 0 mm
WITH OVEN
Indicates whether the cooktop can be installed above oven. Default is "Y" Yes
MIN worktop thickness with oven 30 mm
MAX worktop thickness with oven 60 mm
DIMENSION MEASURE
Indicates whether a protection tray against heat or contact is needed with oven. Default is "N" No
Indicates whether a ventilation opening in the back side of cabinet is needed or not with oven.
Default is "Y"
Yes
Indicates the position of the opening in the back side of the cabinet with oven Top
MIN Width of rear opening required with oven 550 mm
MIN Depth of rear opening required with oven. 45 mm
MIN AREA of rear opening required with oven 247.5 cm²
MIN distance from cabinet to rear wall, with oven 20 mm
Indicates whether a ventilation opening in the top front side of cabinet is needed or not with
oven. Default is "N"
No
MIN Frontal gap required, with oven (2) 0 mm
MIN frontal opening area required with oven 0 cm²
WITH CABINET
MIN worktop thickness with cabinet 12 mm
MAX worktop thickness with cabinet 60 mm
Indicates whether a protection tray against heat or contact is needed. Default is "Y" Yes
MIN distance from bottom line of appliance to protection tray 20 mm
Indicates whether a ventilation opening in the tray is needed or not with cabinet Yes
Recess dimension X 100 mm
Recess dimension Y 65 mm
Positioning dimension X by axis 15 mm
Distance of the tray from the back panel/wall 60 mm
Indicates whether a divider is available Service
accessory
Indicates whether a ventilation opening in the back side of cabinet is needed or not. Default is
"Y"
Yes
Indicates the position of the opening in the back side of the cabinet. Top
MIN Width of rear opening of the cabinet 550 mm
MIN Depth of rear opening of the cabinet 45 mm
MIN AREA of rear opening of the cabinet 247.5 cm²
MIN distance from cabinet to rear wall 20 mm
Indicates whether a ventilation opening in the top front side of cabinet is needed or not. Default
is "N"
No
MIN Frontal gap of the cabinet 0 mm
MIN frontal opening area of the cabinet 0 cm²
INSTALLATION SPACE
Depth of immersion underneath the appliance 0 mm
Width protruding area below bottom box 0 mm
Depth protruding area below bottom box 0 mm
Protruding area: X positioning 0 mm
Protruding area: Y positioning 0 mm
ACCESSORIES FOR INSTALLATION
Gasket Separate
KIT