Instruction for Use

18
GB
Switching the appliance off
Disconnect your appliance from the electricity supply
before carrying out any work on it.
Cleaning the appliance
! Never use steam cleaners or pressure cleaners on the
appliance.
• The stainless steel or enamel-coated external parts and
the rubber seals may be cleaned using a sponge which
has been soaked in lukewarm water and neutral soap.
Use specialised products for the removal of stubborn
stains. After cleaning, rinse well and dry thoroughly.
Do not use abrasive powders or corrosive substances.
• The inside of the oven should ideally be cleaned after
each use, while it is still lukewarm. Use hot water and
detergent, then rinse well and dry with a soft cloth. Do
not use abrasive products.
• Clean the glass part of the oven door using a sponge
and a non-abrasive cleaning product, then dry
thoroughly with a soft cloth. Do not use rough abrasive
material or sharp metal scrapers as these could
scratch the surface and cause the glass to crack.
• The accessories can be washed like everyday
crockery, and are even dishwasher safe.
• It is usually enough to wash the hob with a damp
sponge and dry it with absorbent kitchen roll.
• If the hob is particularly dirty, rub with a special glass
ceramic cleaning product, rinse and dry.
• food residue and dirt can be removed using a special
scraper. Do this as soon as possible, do not wait for
the hob to cool down in order to avoid incrustations.
For excellent results, use a special stainless steel wool
pad for vitroceramic glass cleaning soaked in soapy
water.
• If plastic or sugary substances are accidentally melted
on the hob, remove them immediately with the scraper,
while the surface is still hot.
• Once it is clean, the hob may be treated with a special
maintenance and protection product: the invisible
film left by this product protects the surface from
drips during cooking. This should be done while the
appliance is warm or cold.
• Always remember to rinse the appliance with clean
water and dry the hob thoroughly: residues can
become encrusted during cooking.
Inspecting the oven seals
Check the door seals around the oven regularly.
If the seals are damaged, please contact your
nearest Authorised After-sales Service Centre.
We recommend that the oven is not used until the seals
have been replaced.
Replacing the oven light bulb
To replace the oven
light bulb:
1. Remove the glass cover using a screwdriver.
2. Unscrew the light bulb and replace it with a similar
one: Wattage 15 W, cap E 14.
Replace the glass cover, making sure the seal is
positioned correctly (see diagram).
! Do not use the oven lamp as/for ambient lighting.
Care and maintenance
Glass door
Seal
Lamp
Oven
compartment