Instruction for Use

GB
17
• remove all accessories and the sliding rack kit (where present);
• do not place tea towels or pot holders over the oven handle.
! If the oven is too hot, the pyrolytic cycle may not start. Wait for the oven to
cool down.
! The programme may only be started once the oven door has been closed.
To activate the Fast Clean programme:
1. Switch the control panel on by pressing the button.
2. Press the , the display will show the text “Piro”, “nor” and the default
duration of 1:30 h (normal cycle) alternately.
3. Press button , then turn the TIMER knob to adjust the default cleaning
level. There are 3 different levels to choose from, each with a pre-set duration
which cannot be modied:
1. Economy (ECO): turn the knob towards “ ”. Duration 1 hour.
2. Normal (NOR): initial level. Duration 1 hour and 30 minutes.
3. Intensive (INT): turn the knob towards “ ”. Duration 2 hours.
4. Press the button to conrm.
5. Press the button to begin the cleaning cycle.
An end time for the FAST CLEAN cycle (as for a normal cooking cycle) may
be programmed (see Programming the automatic cleaning end time).
! The desired Fast Clean mode will be conrmed and started automatically
if the CLOCK icon button is not pressed within 10 seconds from selecting
the cooking time.
Safety devices
• the door locks automatically as soon as the temperature reaches a high
value; the icon lights up on the display;
• pressing the button cancels the cleaning cycle t any time;
• if a malfunction occurs, the heating elements will be switched off;
• once the oven door has been locked, you cannot change the duration and
end time settings.
Programming the automatic cleaning end time
1. Press the button twice: the icon and the numerical digits on the
display will begin to ash.
2. Turn the TIMER knob towards “ ” and “ ” to adjust the cleaning end
time value.
3. Once you have reached the desired end time, press the button again.
The display will show the duration, the cleaning end time and the set cleaning
level alternately.
4. Press the button to activate the programmed mode.
Programming has been set when the and buttons are illuminated.
5. Once cleaning has nished, “END” appears on the display and a buzzer
sounds.
• For example: it is 9:00 a.m. and the Economy (ECO) FAST CLEAN level
has been selected, with the default duration of 1 hour. 12:30 is scheduled
as the end time. The programme will start automatically at 11:30 a.m.
To cancel programming press the button.
Once the automatic cleaning cycle is over
Before you can open the oven door, you will have to wait for the icon to
switch off: this indicates the oven temperature has dropped to an acceptable
level. You will notice some white dust deposits on the bottom and the sides
of your oven; remove these deposits with a damp sponge once the oven
has cooled down completely. Alternatively, you can make use of the already
heated oven, in which case it is not necessary to remove the deposits, they
are completely harmless and will not affect your food in any way.