Water Heater User Manual

04 Features and benefits
Multipoint 75/100
Multipoint 75/100 are ideal for commercial applications such as
cloakrooms, kitchens or washrooms, where a single heater is
required to service multiple draw-offs. Both products may also
be used for single point showering and are available with 6kW
rating (2 x 3kW elements) for use in locations where faster hot
water recovery is required.*
As with all unvented units above 15 litres, it is a Building
Regulation requirement that installers are competent to install
Multipoint 75 and 100 litre units. This normally means having
successfully completed a course in unvented systems.
For details on training courses call 0845 600 7402.
Capacity Basins
75 5 to 8
100 8 to 10
Multipoint 75/100 selection matrix
N.B. Figures are for guidance only, the Heatrae Sadia Specifier Advice team should be
contacted to discuss requirements for specific sites.
75 and 100 litre capacities
Choice of 3.0kW or 6.0kW rating
Factory-fitted temperature and pressure relief valves
Twin heavy gauge copper inner containers
Replaceable long life alloy sheathed elements
Adjustable thermostats 5°C to 75°C max.
Suitable replacement for Cistern-type water heaters where
improved water flow required
CFC/HCFC free (ODP zero) insulation GWP 3.1 (Global
Warming Potential)
Element ‘On’ indicator
No anodes to inspect or replace
Suitable for use with any standard mixers or taps
Fitted with 1 metre of 3-core cable
Comprehensive installation instr
uctions
BEAB and kiwa approved
Five year on-site parts and labour inner container guarantee
Items supplied factor
y fitted to all units
Expansion vessel
Pressure relief (expansion) valve
Temperature & pressure relief valves
Items supplied loose
Combined pr
essur
e-r
educing valve with built-in strainer
T
undish
Mounting brackets
* Depending on demand, increased effective capacity and levels of user protection can
be achieved by the use of Heatrae Sadia's ther
mostatic blending valve Pack U3 or U7
(See page 6).