Instructions / Assembly

M M8 12pcs

H 8x60mm 12pcs

J 6x40mm 6pcs

K 3.5x50mm 6pcs

L 3.5x40mm 5pcs

I 6x60mm 18pcs

Each leg D on the right of

wood pice just like above photo

Each leg assembled just like above photo

bolts I 50% tighten

K and L should be 100% tighten

O 10# 1pc P 14# 1pc

partial 1

Wooden PIcnic Table Assembly Instruction

K 6pcs

L 2pcs

Step 1

Step 2

I 6pcs

PAGE 1
Wooden PIcnic Table Assembly Instruction H 8x60mm 12pcs L 3.5x40mm 5pcs J 6x40mm 6pcs I 6x60mm 18pcs M M8 12pcs O 10# 1pc Step 1 I 6pcs K 3.
PAGE 2
Step 3 H 6pcs M 12pcs All of the drag wood are on the right side of the leg D H should be 100% tighten After H be tightened, then put on M Step 4 I 12pcs I should be tighten by 50% Repeat this step on the other two benches Step 5 J 6pcs J should be tighten by 30% Repeat this step on the other two benches Step 6 H 6pcs L 3pcs The cross wood in the middle of part B should be on the left side of C and be vertical with D then assemble Bolts H, until it is 100% tighten then assemble L until 100% tighten R
PAGE 3
repeat last step until assemble complete then tighen every bolts and screws to be 100% Complete Max capacity Table top:75LBS Each seat:500LBS