nu,, ....... .1111111111 H6 PRO AC/DC Smart Charger Operating Instructions Shenzhen HOTA Technology Co., LTD.
HG PRO AC/DC Smart Charger Thank you for purchasing the HOTA series of smart chargers. Please read this Instructions carefully before use so as to use the product better, please keep this Instruction in a place safe for easy access. If you want to know more about our smart chargers, please visit our website: www.hota-exp.com Ver 2.0.
Contents Product Overview -- --------------------------------------------1. Specifications ---------------------------------------------------2. Introduction ------------------------------------------------------3. Warnings and Safety Notes ---------------------------------- 01 01 02 03 4. Recommended Connected Way---------------------------- 03 5. Balance Port Connection and Notes---------------------- 04 6. Multi-Function Por t --------------------------------------------- 05 7.
HG PRO AC/DC Smart Charger Features • Small Smart This is a charger of amazing power-to-volume ratio, with support of AC 200W and DC 700W charging power, that makes charging no longer anything limiting the users. Charging Without Borders • Wide-range AC Input High-efficiency industrial power management , Active PFC plus resonant control , with support of short circuit protection(SCP), over load protection(OLP), over voltage protection(OVP), over temperature protection(OTP), over current protection(OCP).
Product Overview Specifications Input Voltage Charge Power AC 100-240V / DC 6.5-30V Charge Current 0.1-26A DC 700W @ input voltage > 24V Balance Current 2000mA AC 200W Regenerative Discharge 700W Power Discharge Power 0.1-SA USB Output SV / 2.1A Internal Discharge: 30W (Balance port 10W) Storage Temperature ° -20-60 C External Discharge:700W Operating Temperature ° 0-40 C LiHV/LiPo/LiFe/Lilon/Lixx : 1-6S Battery Type Discharge Current Screen Size 2.
� Product Overview Introduction ____....--························································ Touch Key Update Port � � � AC Port ......................... .
� Product Overview Warnings and Safety Notes 1. Do not use the charger in an unattended manner, in case of any functional abnormity, please stop using it and refer to the manual. 2. Keep the charger away from dust, humidity, rain and high tempreture, as well as avoid direct exposure to sun and intense vibration. 3. Input voltage of the charger is 6.5-30V DC. When connecting the power supply, make sure that the input voltage match the operating voltage range of the charger. 4.
� Product Overview 4S ._______ 5S�---6S�----- :::::J :::::J :::::J :::::J :::::J :::::J :::::J Balance Port Connection and Notes 1. The detection balance port of this product is suitable for lithium battery packs; 2. When the battery is connected, it is aligned with the "-" sign.
� Product Overview Multi-Function Port 1. Connect to the RC airplane control servo 2.
� Product Overview Standard Battery Parameters NiCd NiMH Li Fe Lilon Li Po LiHV NiZn Lixx Smart Battery Pb Eneloop Rated Voltage 1.20V 3.20V 3.6V 3.70V 3.80V 1.50V 3.7V 3.70V 2.00V 1.20V Full Charger Voltage 1.50V 3.65V 4.10V 4.20V 4.35V 1.93V 4.20V 4.20V 2.46V 1.50V Storage Voltage No supported 3.30V 3.70V 3.80V 3.85V 1.60V 3.80V 3.80V Discharge Voltage 0.90V 2.90V 3.20V 3.30V 3.40V 1.20V 3.30V 3.30V k rs � Balance Charge No No supported supported 1.
� Operation and Setup How to Confirm Charging Current • It is very important to know the maximum charging current of the battery as excessive current could influence the life span of battery and/or cause damages. In addition, excessive current can cause heating and/or explosion of the battery during the charging process. • The charging and discharging capacity of battery is usually marked with C value.
� Operation and Setup Working Parameters Display Device Name ----------. Operation T ime Task Status Present Power Present Current Capacity -- Charged 8 -.---V 0 -.---V Current Total Battery Voltage Standby Standby State Simple Operation 1. Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking. connect the battery to the charger in the standby interface; 2.
� Operation and Setup Working Parameters Display .---- Operati on Time Task Status Present Current --Capacity __ Charged Input Voltage Operating Temperature 4D • 5.26 mWh Power output Present --- Power Current Total Battery Voltage Charged ---+---- Times Input Power Power Output Status Simple Operation 1.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion Percentage Operation Time Present Current Capacity _____ Charged 0 4.003V 8 4.006V 8 4.008V 0 4.007V 8 4.00SV 8 4.001V Current Total Battery Voltage Cell Voltage Charging Charging Status Simple Operation 1. Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking. connect the battery to the charger in the standby interface; 2.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion --� Percentage .---- Operation Time Task Status Present -Current Present Power Capacity __ Charged Current Total Battery Voltage 0 4.201V 9 4.196V 8 4.198V 0 4.193V 8 4.195V 0 4.198V Cell Voltage Fast Charge Done Fast Charge Done Status Simple Operation 1.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion --� Percentage Operation Time Task Status Present Current Present --- Power Capacity Charged 0 3.999V 8 3.994V 8 3.998V 0 3.996V Current Total Battery Voltage 8 3.gg7v ___ Cell Voltage 0 3.995V Discharging Discharging Status Simple Operation 1. Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion Percentage .--- Operation Time Task Status Present Current --- --- Present Power -- Current Total Battery Voltage Capacity Charged Input Voltage Operating Temperature (i) 5.26 mWh External Discharging ---- Charged T imes Input Power External Discharging status Simple Operation 1.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion Percentage Operation Time Task Status Present Current Capacity __ Charged 0 3.753V 0 3.756V 8 3.758V 0 3.757V 8 3.754V 0 3.751V Present Power Current Total Battery Voltage Cell Voltage Storage Charging Storage Charging Status Simple Operation 1. Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion Percentage Operation T ime Task Status Present Current Present ---Power Capacity Charged Current Total --- Battery Voltage 0 3.952V 0 3.955V 8 3.957V 0 3.954V 8 3.956V 0 3.953V Cell Voltage Balancing Balancing Status Simple Operation 1. Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking.
� Operation and Setup Working Parameters Display Battery Type-string Number Current & Completion Percentage ...---- Operation T ime Task Status Present --Current Present Power Capacity -Charged Current Total Battery Voltage 0 3.756V 0 -.--- V 8 3.763V 0 -.---V 8 3.75 7V 0 -.---V Cell Voltage Regen. Discharging ReGen. Discharging Status Simple Operation 1.
� Operation and Setup Charger Settings Charger settings ·•-·· ·•·•-•· ·•� Task Parameters System Parameters Tools Calibrations ®" System Self-checking - � Factory Settings � System Info � Back In the standby interface, Long press the Okey to pop up the "Charger Settings" menu. The menu items are as follows: Task Parameters Adjust Safety Timer, Max Capacity, End Current and other parameters System Parameters Adjust Language, Regen.
� Operation and Setup Charger Settings > Task Parameters < Task parameters @ Safety Timer =� � Max. Capacity 2400 Minute 999999mAh End Current � Trickle Charge � Back 10% On In the standby interface, Long press the Okey to pop up the "Charger Settings" menu. and then choose "Task parameters" item, the menu items are as follows: Safety T i mer Allows maximum running time; running beyond this setting, automatic protection will stop the task. Max.
� Operation and Setup Charger Settings > System Parameters < System Settings A= Language � Regen. Discharge � Max. input power 750W @ Min. input voltage -,11. '- LCD backlight 6.SV • (]: Volume Completion signal fJ-. Device name � English High High Repeat Name Back In the standby interface, Long press the Okey to pop up the "Charger Settings" menu. and then choose "System parameters" item, the menu items are as follows: Language System language setting Regen.
� Operation and Setup Charger Settings > Tools < Tools PWM Measurement Servo Test ·- PPM Out � Back In the standby interface , Long press the Okey to pop up the "Charger Settings" menu.
� Operation and Setup Task Settings Task Settings li. Charge Select task Battery type LiPo @ Cell voltage 4.20V D 8 ► Cell count 6S(22.2V) Current setting 1.0A Start task � Back Connect power supply to the AC or DC port of the charger, wait for the system to complete the self-checking. In the standby interface, connect the battery to the charger, and short press the O key to pop up the "Task Settings" menu.
� Operation and Setup Task Settings and Notes The H6 PRO AC/DC smart charger is operation in a series charging mode. When connecting the battery, the battery output cable must be connected. For lithium batteries, it is strongly recommended to connect the balance ports for balanced charging so as to ensure that the charger can accurately monitor the voltage of each cell and balance the cells with poor consistency.
� Operation and Setup Task Settings and Notes External Discharge Function The external discharge function uses the external high-power load resistor to quickly discharge the battery accurately. When it is used, the battery to be discharged needs to be connected to the input port, and the output is connected to the resister load. It is recommended that the resistance of the load be between 1.5 and 2.5 ohms. Other resistance values can also be used normally, but may not be able to operate at full power.
� Operation and Setup Task Settings and Notes Regenerative Discharge Function The HG PRO AC/DC smart charger has a regenerative discharge function of up to 700W, which take the battery power of the output terminal back to input end's battery in the balance way .
� Operation and Setup Task Settings and Notes About Internal Resistance Measurement The H6 PRO AC/DC Smart Charger has a cell internal resistance measurement function that is only effective when performing balanced charging tasks on the battery. About two or three minutes after the start of the charging task, the internal resistance of the battery is measured and calculated. The internal resistance of the battery varies with different power levels.
� Product Qualification Declaration • H6 PRO AC/DC Smart Charger conforms to relevant commands in B: 2017, PART15 CLASSB; PART15 CLASSC, FCC Testing Standards Result EN 60950-1:2006+A11:2009+A1:2010+A12 : 2011+A2:2013 Yes EN 62311:2008 Yes ETSI EN 301 489-1 V2.2.0(2017-03) ETSI EN 301 489-3 V2.1.1(2017-03) Yes ETSI EN 303 417 V1.1.
� Troubleshooting • Error processing during "System self-checking" : when the charger is performing the System self-checking, if the output port is connected to the battery, it will cause a self-checking error, at this time, the battery should be removed and wait 5 seconds before retrying. Do not insert the DC port battery during the System self-checking. Wait for the self-checking to complete before performing other operations.
� Safety Tips Do not charge/storage the following types of batteries: • Batteries of different manufacturers, different models, different types or different capacity • Non-rechargeable battery (may cause an explosion) • Battery of unrecognized type or unknown parameter • Battery with special requirements for charging technology • Battery that is damaged or defective • Battery with built-in combined circuit or protection circuit • A battery installed in another device or connected to other components • Recha
� Safety Notes Before using the charger for the first time, please read the details in the "Safety Notes". Make sure you use this charger safely and correctly. WARNING! FIRE HAZARD! NEVER USE CHARGER UNSUPERVISED! • Please read the complete Instructions carefully before using the charger; • Make sure that the charger is kept away from heat and humid environment during use, pay attention to ventilation and heat dissipation, pit it away from flammable materials; • Do not let the child operate the charger.
nu,..., • -.-.�..- ltiJll$tt�$M!lfflU�a:J • @ Shenzhen HOTA Technology Co., LTD . Add: Floor 2, Building 2, Guorun Industrial Park, Min Zhi, Longhua District, Shenzhen, China Tel: 0755-28180135 �·.... .... •••• • \.: , , Website: www.hota-exp.com E-mail: info@hota-exp.
