Hospira MedNet 802.
© Hospira, Inc. This document and the subject matter disclosed herein are proprietary information. Hospira retains all the exclusive rights of dissemination, reproduction, manufacture, and sale. Any party using this document accepts it in confidence, and agrees not to duplicate it in whole or in part nor disclose it to others without the written consent of Hospira.
Change History Part Number Description of Change 430-11541-001 (Rev.
CHANGE HISTORY This page intentionally left blank.
Contents INTRODUCTION TO THE MEDNET WIRELESS MODULE - - - - - - - - - - - - FCC INFORMATION - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - US FCC (FEDERAL COMMUNICATIONS COMMISSION) STATEMENT - - - - - - FCC INTERFERENCE STATEMENT - - - - - - - - - - - - - - - - - - - - - - RADIO FREQUENCY EXPOSURE STATEMENT - - - - - - - - - - - - - - - - - GUIDANCE ON EMC COMPATIBILITY - - - - - - - - - - - - - - - - - - - - - INSTALLING THE HOSPIRA MEDNET® PLUG ’N PLAY MODULE (LIST 20677-04) To Replace the
Introduction to the MedNet Wireless Module The Hospira MedNet 802.11 a/b/g Wireless Upgrade Module is designed as an upgrade module for Hospira Plum A+ Infusion Systems (Lists 20792, 20679, 12391 & 11791). The host units are mobile infusion devices designed to be employed in the medical care environment.
- Industry Canada, Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada's Safety Code 6 for Exposure of Humans to Radio Frequency Fields, Radio Standards Specification RSS-102 Issue 1 (Provisional): September 1999. • The radiated output power of this Wireless LAN device is far below the FCC radio frequency exposure limits.
Installing the Hospira MedNet® Plug ’n Play Module (List 20677-04) Note: For use with Hospira Plum A+ Infusers with software version 10.3 and higher. Note: The recommended tool for this procedure is a No. 2 Phillips screwdriver. CAUTION: CAUTION: Use proper ESD grounding techniques when handling components. Wear an antistatic wrist strap and use an ESD-protected workstation. Store the PWA in an antistatic bag before placing it on any surface. To Replace the Module, proceed as follows: 1.
Configuration Guide General Notes This document is a general guide for using the CE Configuration Tool. Note: Please refer to the Installation and Configuration Guide and the User Guide for proper use, warnings and cautions associated with the Hospira MedNet® Software. The application software is a web page server that resides in the CE. From the server on which HMSS resides, access the infuser Status screen by entering: https://infuserIPaddress:8443 Note: The default IP address for the infuser is 192.168.
• In this document, “character” refers to all upper- and lower-case letters, numbers, punctuation marks, symbols (i.e.
Ethernet Properties Field/Button MAC Address Content/Action (Not configurable, READ ONLY) Device MAC address Default: factory default MAC address Use DHCP Unchecked: Displays IP Address, Subnet Mask, Gateway fields, DNS1, DNS2, and Domain Checked: Hides IP Address, Subnet Mask, Gateway fields, DNS1, DNS2, and Domain Default: unchecked IP Address (available when DHCP is unchecked) IP Address of the device Subnet Mask (available when DHCP is unchecked) Subnet Mask of the device Gateway (available wh
Field/Button Use DHCP Content/Action Unchecked: Displays IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and Domain Checked: Hides IP Address, Subnet Mask, Gateway fields, DNS1, DNS2 and Domain Default: unchecked IP Address (DHCP is unchecked) IP Address of the device Subnet Mask (DHCP is unchecked) Subnet Mask of the device Gateway (DHCP is unchecked) Gateway Host Name or IP Address DNS1 (DHCP is unchecked)- Optional field Primary DNS IP Address DNS2 (DHCP is unchecked)- Optional field Sec
Field/Button Transmit Power Content/Action 100% (maximum), 75%, 50%, 25%, 12%, 6%, 4%, 2%, 1% (lowest) Default: 100% Note: 100%=50 mW; 50%=25 mW; 25%=12.5 mW; Minimum=1 mW Country List of countries Default: United States Note: Selecting a country from the drop-down list, adjusts automatically the frequency and channels.
Field/Button Frequency Content/Action 802.11b (2.4GHz) 802.11b/802.11g (2.4GHz) 802.11g (2.4GHz) 802.11a (5GHz) Auto Default: Auto (The "Auto" option is comprised of 802.11a, 802.11b and 802.11g) Note: Selecting Auto prompts a sequential search and may be slower. Applies if the frequency does not include 802.11b 802.
Security Important: Security settings, such as identify, password, etc. should conform to your infrastructure.
WEP Field/Button Security Content/Action Disabled WEP (Static only) WPA Personal WPA Enterprise When WEP is selected, displays Authentication Type, Key Length, WEP Keys 0 - 3, and Default Key fields When WPA Personal is selected, displays Shared Key field When WPA Enterprise is selected, displays Authentication Type and Validate Server Cert objects and fields Default: Disabled Authentication Type (WEP selected) Open Shared Default: Open Key Length WEP 40 (40 + 24/10 hex digits) WEP 104 (104 + 24/26 h
WPA Personal Field/Button Security Content/Action Disabled WEP WPA Personal WPA Enterprise When WPA Personal is selected, displays Shared Key field Default: Disabled Encryption Protocol WPA2-CCMP/AES (requires appropriate hardware for access points) WPA1-TKIP Default: WPA2-CCMP/AES Shared Key 64 (hex) character shared key value or an 8 - 63 ASCII character pass-phrase Note: An invalid entry will prompt an error message and display the field requirements Previous Displays the previous screen Reset
WPA Enterprise Note: WPA Enterprise requires an authentication server. We support Free Radius and Cisco ACS.
WPA Enterprise - Authentication Type Authentication Type: EAP-TLS (Default) Field/Content Identity Validate Server Cert Note: Placing a checkmark in the box next to Validate Server Cert: enables the server certificate validation.
Certificates This category is optional and will depend upon your network configuration. Field/Button Client Certificate Content/Action Default Hospira Certificate User Specified Certificate Default: Hospira Certificate Client Certificate (User Specified Certificate selected) Private Key File (upload/browse feature) Password Confirm Password Certificate File (upload/browse feature) Note: A “Success” message appears once the file is loaded and the file information displays.
HMSS (Hospira MedNet® Server Suite) Field/Button HMSS HostIP Address Content/Action Server IP address or hostname Format: alphanumeric and the following (3) characters: Period (.), hyphen (-), underscore (_). The first character must be an alpha-character and the last character may not be a hyphen (-) character. A valid IP address is of the form "xxx.xxx.xxx.xxx" where xxx is a number between 0 and 255.
Field/Button Content/Action Previous Displays the previous screen Reset Allows you to reconfigure the current page only Finish Displays the Finish Configuration screen and should only be clicked when all the variables have been entered Next Displays the following screen Note: Web configuration access to the device using HTTPs (SSL) is always enabled. Administration Field/Button Content/Action Web User Web log in username. Format: ASCII, 1-31 characters.
Wireless Lan Device Specifications 430-11541-001 Standards: IEEE802.11a/b/g Transmit Power: 802.11 b/g: 17.6 dBm 802.
For technical assistance, product return authorization, and to order parts, accessories, or manuals within the United States, contact Hospira Technical Support Operations. 1-800-241-4002 For additional services and technical training courses, visit the website at www.hospira.com. For technical assistance and services outside the United States, contact the local Hospira sales office. CAUTION: Federal (USA) law restricts this infuser to sale by or on the order of a physician or other licensed practitioner.