How-To Guide

ManualsBrandsHOSEOTELNET ManualsElectronicsSOS BUTTON

Online Manual

1. How to Start Ray@Home

1) How to Download Ray@Home App

Android App: Search “Ray@Home” and download the APP from Google’s Play Store.

iOS App: Search “Ray@Home” and download the APP from App Store.

2) Information on Supported Devices

Devices with Android 4.0 or above are able to run Ray@Home.

Devices with iOS 11 or above are able to run Ray@Home.

3) How to Sign up and Log in

Open Ray@Home app and then click ‘Sign-Up’ at the bottom of the log-in screen to complete the sign-

up process before running Ray@Home.

The sign-up can be done via e-mail, Facebook and/or KaKao Talk accounts.

After properly completing the log-in process, the main screen will appear, to register the Hub.

4) How to Set up a Home Router

Check the Wi-Fi name and password of the router to be connected to the network of Ray@Home.

A wired or wireless router is needed to access the Internet. However, the router should be purchased

separately.

Ray@Home is able to work only when connected to a 2.4 GHz Wi-Fi network.

Wired Router

Wireless Router

2. How to Register Devices

1) How to Register and Remove Sensors (Common Matters)

How to Register Sensors

1. Click [Main Screen>Sensor Icon] on the app.

※ Ray@Home sensors are able to be registered only after completely registering the hub for the app.

[Sensor Registration Screen]

2. Press the registration button on the back of the Smart Hub one time. With the sound of ‘Beep’, the

status LED blinks in blue. (=Sensor Registration Mode)

Registration/Reset Button

[Smart Hub Registration/Reset Button]

[Smart Hub LED Status]

Summary of content (5 pages)

PAGE 1
Online Manual 1. How to Start Ray@Home 1) How to Download Ray@Home App Android App: Search “Ray@Home” and download the APP from Google’s Play Store. iOS App: Search “Ray@Home” and download the APP from App Store. 2) Information on Supported Devices Devices with Android 4.0 or above are able to run Ray@Home. Devices with iOS 11 or above are able to run Ray@Home.
PAGE 2
3. Put batteries in each of the sensors of Ray@Home to power them on. ※ When registering Ray@Home sensors, proper procedures must be always followed by first changing to Smart Hub’s Sensor Registration Mode and then putting batteries in Ray@Home sensors. (Otherwise, errors in the sensor registration may occur.) 4. The sound of ‘pee-ri-ri-ri’ coming from Smart Hub within around 10 seconds indicates that the registration has been completed. 5.
PAGE 3
2) SOS Button 1. Click [Main Screen>Sensor Icon] on the app. ※ Ray@Home sensors are able to be registered only after completely registering the hub for the app. [Sensor Registration Screen] 2. Press the registration button on the back of Smart Hub one time. With the sound of ‘Beep’, the status LED blinks in blue. (=Sensor Registration Mode) [Smart Hub Registration/Reset Button] [Smart Hub LED Status] 3.
PAGE 4
3. Recommended Installation Places After installing the devices in recommended places, check if they are properly operating through “4- 3) Tests before Using Ray@Home.“ The communication range between the sensors and the hub varies depending on structural features of the installation places, the Internet environment, etc. ※ Check if communications are accessible before deciding on installation places. 1) General Matters to Keep in Mind When Installing the Products 1.
PAGE 5
4. What to Keep in Mind when Using Ray@Home 1) Matters to Keep in Mind when Using Ray@Home Do not disassemble the hub at your own discretion even if it malfunctions. Do not install the device in places that intensely shake or are around magnets. Do not install the device in places with high humidity and direct sunlight. The device is set to the domestic rated voltage. Sometimes, there might some cracks on video images when watching them under the user’s smart phone Wi-Fi and LTE environment.