USER’S MANUAL ST902 TwoWay Pager SUN TELECOM
Turning Device On Ensure that a AA alkaline battery is properly installed. Open the lid and press the ENTER key to power on the device. Upon powering on, the ST902 will take several seconds to initialize before displaying the Home Screen. From the Home Screen, press any key (except ESC key) to display the Main Menu.
Using the Main Menu Use the Main Menu for the following features: z Read the received or sent messages z Send messages z Access contact information z Change preferences z Set the alarm z Access quiet mode z Turn the transmitter off and on z Turn the device off Press navigation keys to highlight the desired feature and then press Enter.
Setting the Time and Date • • • • From the Main menu, press the navigation keys to highlight Preferences and press Enter. Press navigation keys to highlight Setup and press Enter. Press navigation keys to highlight Set Time & Date and press Enter. Use Left/Right keys to select the desired Network Sync type. They are: z z • • • • Yes No : The minutes value of the time is automatically set. : Allows complete manual setting of the time and date. Use Up/Down keys to move the cursor up and down.
Sending a Message This section discusses how to compose a message, select addresses and send a message with the device. Composing a Message From the Main Menu, press the navigation keys, highlight Write and then press Enter. Enter a message. After composing the message, press the Menu key (located at the upper left corner of the keyboard). Menu Options The device will display six menu items. Menu items include: Select Address, Send, Add-replies, QuickText, Back and Cancel.
Selecting Addresses Up to twenty addresses from existing contacts can be selected for sending a single message to. • • • • • Use Navigation Keys to move the cursor and highlight the desired address. Press Enter and then use navigation key to select the desired address type. Press Enter to select the address. A wireless address or email can be manually entered by selecting Enter Address and then selecting One Time Wireless or One Time Email from the list.
Reading a Message z z z When a Personal is received, the device displays a pop-up window and alerts according to the InBox Alert setting. (Please see the Setting Alert section of this manual for details on how to set the InBox Alert and the “Setting News/Info InBox” section of this manual for adjusting the alert for News/Info messages) To Stop the alert press any key, or open the flip cover. The InBox or News/Info icon will flash until all received messages have been read.
Setting an Alert InBox Alert • From the Main menu, press navigation keys to highlight Preferences and press Enter. • Press navigation keys to highlight Alert Setting and press Enter. • Press navigation keys to highlight InBox Alert and press Enter. • Press Enter to select the desired type. • Press ESC to exit. Reminder Alert When this feature is enabled, the device will periodically emit a reminder alert if there are any unread personal messages.
Alert Volume • From the Main menu, press navigation key to highlight Preferences and press Enter. • Press navigation keys to highlight Alert Setting and press Enter. • Press navigation keys to highlight Alert Volume and press Enter. • Use navigation key to select the desired alert volume. Press Menu to listen the alert. • Press enter or ESC to save and exit.
Replying to Messages For convenience, the device has several pre-programmed reply messages. To reply to a message using one of the pre-programmed replies, proceed as follows. Sending a Pre-Programmed Reply • While previewing or reading a message, press Menu to access the Message Options menu. • Press navigation keys to highlight Reply and press Enter. The device displays the list of pre-programmed reply messages from which to choose. • Press navigation keys to highlight the desired reply and press Enter.
Forwarding Messages Received messages can be appended to and forwarded from the device. To do so, proceed as follows. • While viewing a message, press Menu to display the Message Options menu. • Press navigation keys to highlight Forward and press Enter. Add text to the message if desired. • To send the message, follow Sending a Message routine. Resending Messages from the OutBox Messages sometimes cannot be sent initially or fail to be sent due to coverage problems.
Deleting All Read Messages All read messages in the InBox can be deleted. • While previewing messages, press Menu To display the Message Options Menu. • Press navigation keys to highlight Delete Read and press Enter. Deleting All Messages All messages in the InBox can be deleted. • While previewing messages, press Menu to display the Message Options menu. • Press navigation keys to highlight Delete All and press Enter. Deleting Sent Messages All sent Message in the OutBox can be deleted.
Setting News/Info InBox The device may have a number of News/Info Inboxes. Each News Inbox can be configured with its own alert and history depth. The steps for previewing and reading the News messages are same as those for the InBox. Set History The number of messages that will be stored in each of the News/Info InBox folders can be limited. To set the desired number of messages, proceed as follows. • Move the cursor to Read from Main Menu and press Enter.
Contacts An individual contact entry may include First Name, Last Name, Wireless Address, Work Email, Home Email, Company, Home Phone, Work Phone, Mobile, Fax, Street, City, State, Zip and Note. In addition, address groups can be defined. Creating a Contact • From the Main menu, press navigation keys to highlight Contacts and press Enter. • Press navigation keys to highlight New Contact and press Enter.
Searching the Contacts Use the Search feature to search the list of Contacts. • Type the first few characters of the Contact’s name to begin the search. • To select the desired Contact, press Enter. Editing a Contact • From the Contacts menu, press navigation keys to highlight the desired Contact and press Enter. • Press Enter to select the Contact. • Press Menu to display the Options menu. • Use navigation keys to highlight Edit and press Enter.
Setting the Alarm The • • • • • • • alarm can be set for either a specific time and date, or it can be used as a daily alarm. From the Main menu, press navigation keys to highlight Set Alarm and press Enter. Use Left/Right keys to select the desired mode (Disable, Once, or Daily). Use Up/Down keys to move the cursor up and down. Press Enter to increase the time and date while the cursor is on Time and Date option.
Turning the Transmitter Off Note: When the transmitter is turned off, the device cannot send messages or replies. However, it may still receive messages. • From the Main menu, press navigation keys to highlight Transmitter and press Enter. • Press navigation keys to highlight On or Off as desired. • Press Enter to select the desired option. • Press ESC to exit. Setting Quick Text Up to 10 Quick Texts entries can be created for use with composing a message. To edit Quick Text, proceed as follows.
Setting Private Time Private Time mode allows a time period to be specified during which the device receives messages and performs all functions without an audible or vibrate alert. • • • • • • • • From the Main menu, press navigation keys to highlight Preferences and press Enter. Press navigation keys to highlight Private Time and press Enter. Press Left/Right keys to select the mode (Disable/Enable). Press Up/Down keys to move the cursor up and down.
Creating a Signature The device allows a signature to be created for the message and automatically append it to each message sent. To do so, proceed as follows. • • • • • From the Main menu, press navigation keys to highlight Preferences and press Enter. Press navigation keys to highlight Setup and press Enter. Press navigation keys to highlight Signature and press Enter. Using the keyboard, type the signature text as it should appear in the messages. Press ESC to save and exit.
Setting the Screen Saver • • • • • • From the Main menu, press navigation keys to highlight Preferences and press Enter. Press navigation keys to highlight Setup and press Enter. Press navigation keys to highlight Display / KeyBD and press Enter. Press navigation keys to highlight Screen Saver and press Enter. Press Left/right keys to select the desired Timeout period. Press ESC or Enter to save and exit. About The About menu item includes information regarding memory, battery and software version.
Safety Information Read this information before using a wearable two way pager. First introduced in 2000, the two way pager is one of the most exciting and innovative electronic products ever developed. With it, you can stay in contact with your family, your office, information services, and others. For the safe and efficient operation of your two way pager, Observe these guidelines: Your communicator is a radio transmitter and receiver.