Guest Pager User’s Manual
Contents 1. 2. Components Instructions 2.1 Installation 2.2 Operations 2.3 Before Use 3. 4. Caution Transmitter Instruction 4.1 Keypad Description 4.2 Paging Instruction 4.3 Preference 4.4 Other Features 5. 6. Description of Coaster Description of Staff Pager 6.1 Menu 6.2 Button Configuration 6.3 Functional Description 7. Care & Maintenance ………………………………………………… ………………………………………………… ………………………………………..……….. ……………………………………………..….. ……………………………………………….... ……………………………………………...…. ……………………………………………..…..
1. Components 2. Instructions ※ Actual product might be different from the picture below. 2.1 Installation - Connect Antenna in to Transmitter. Connect Transmitter A/C Adaptor in to Transmitter Connect Transmitter A/C Adaptor in to power outlet. Connect Coaster A/C Adaptor in to Coaster Base. Connect Coaster A/C Adaptor in to power outlet. Stack Coasters on top of Coaster Base. Add AAA battery in to Staff Pager. 2.
2.3 Before Use - Follow the “Instructions” on page 3 to set up the equipments. If coaster is not registered please refer to page 11,1-6 “Pager Registration”. Registration of Staff Pager is the same as Coaster but must use PIN #900 – #999 in order to add staff name. To register staff name on the staff pager, refer to page 12, 1-8 “Staff Name”. To save canned message, refer to page 12, 1-10 “Canned Message Setting” Once registration is done, refer to page 5, 4.2 “Paging Instruction” 3. Caution 3-1 .
4. Transmitter Instruction 4.1 Keypad Description ① ② ③ ⑨ : MENU : Menu Entry ⑩ : DEL : Deletes the last entered character ( use as down arrow key on the menu list) ⑪ : SPACE : Use as hyphen in group calling ( use as up arrow key on the menu list) ⑫ : Number Keypad : Input numbers 4.
1-2. Sending Message (Staff Pager) - using a canned message in the Transmitter ex) calling Staff Pager #910 by using canned message #3 or ※ Staff Pager must be registered between 900 to 999 in order to assign names. ※ USB keyboard must be connected to the Transmitter in order to input characters. ※ To use USB keyboard press key on the Transmitter before typing. or - text message ex) calling Staff Pager #910 by inputting new message via USB keyboard keyboard input 1-3.
2. Group Calls 2-1. General Group Call (Coaster & Staff Pager) - calling consecutive numbers at once ex) calling Coaster #2 thru #7 or - USB keyboard input method is same as page 6(1-2 ). 3. Re-Call 3-1. General Re-Call - re-call last called number/group - press call button to bring last called number ex) re-calling last called #7 2-2. Group Message Call (Staff Pager) - calling consecutive number of Staff Pagers by entering same messages.
4. Staff Calls (when Staff Pager is Registered) 4-1. General Staff Calls (same as individual calls) ex) calling registered Staff Pager #900 b. using staff menu & canned message number ex) calling Michael who is registered to #901 by selecting #2 canned message (input canned message number) 4-2. Call Staff Pager Using Canned Message a. using staff menu & input key -calling after checking staff name and a message contents.
4-3. Calling Staff Pager Using Frequently Used Canned Message ex) calling registered Staff Pager #901 ※ Frequently used canned message needs to be registered on #10. If message is not selected, #10 will be automatically selected. ※ #10 message will be selected for group calls too. ex) “Hurry up” is registered on #10 ※ Number, alphabet and arrow key can be used for search. ※ When duplicate names are used, no combination of numbers and alphabets can be used. ex) Michael 1 (x) Michael H (o) 4-4.
4.3. Preference 1. User Menu 1-3. LCD Contrast Setting - Adjust contrast of LCD on the Transmitter ex) set contrast to 10 Use up /down ( SPACE/DEL) keys to check menu and use Enter key for setting. key is used to get back to the previous menu. PASSWORD 1-1. BackLight On/Off - BackLight On/Off on LCD screen. input 10 PASSWORD 1-2. Keytone On/Off - It will beep when key pad is pressed or when pagers are programmed correctly. PASSWORD 1-4.
1-6. Coaster/Staff Pager Registration (Adding Pagers) - Coaster must be removed from the Coaster Base to start programming. ex) program a Coater pager #7 with capcode 03248517 ※If you are registering the device that has been registered, it will ask to delete the existing registration before reregistering the same pager. In this case, staff name associated with existing number will be discarded. 1-7. Delete Coaster/Staff Pager Registration - To delete existing registered number.
1-8 Staff Name Setting - Assigning staff name on a registered Staff Pager ex) assigning “Peter” to registered staff pager #900 ※ Staff Pager must be registered and [ USED ] will appear if registered correctly. [EMPTY] will appear if not registered. 1-9 Time Setting - To set year, month, day and time PASSWORD input yy/mm/dd toggle12/24H. ※ If time is set on the Transmitter, it will automatically set time on the Staff Pagers.
2. Manager Menu 2-1 Coaster LED Setting - Ability to set LED brightness on the Coaster ex) setting LED to ”Bright” on all registered pagers PASSWORD 2-3 Out of Range Setting - To Alert when pager is out of range of the Transmitter ex) set “OUT OF RANGE” on PASSWORD or Total : total registered Coaster quantities Current : current set quantities ※ Each pager will register individually. A dot on the left side of the LCD will keep flashing while setting.
2-5 Channel Setting - Set channel on Transmitter, Coaster and Staff Pager ex) setting to Channel A PASSWORD PASSWORD ※ Each pager will register individually. A dot on the left side of the LCD will keep flashing while setting. ※ If there’s no communication between the Transmitter and pager, the Transmitter channel can be reset from the menu (see 2-6 TX Channel Setting) 2-7 Retry Delay Setting - Ability to adjust Retry Call time to prevent interference of using multiple Transmitters.
2-8 INIT EEPROM - Initializing all stored memories of the Transmitter 2-10 RF TEST - Ability to call interval of 10 seconds in order to test distance between the Transmitter and the pagers. ex) testing with the registered coaster #1 PASSWORD PASSWORD User Password 2-9 FACTORY SET - Re-set to factory setting registered Coaster# ※ RF Test can be done for 2 hours if the Transmitter’s output power is set on 10mW or for 10 minutes if set on100mW or 2W. ※ Only PASSWORD Use button can be used while testing.
User password re- enter ※ Default password is set to 1111. 2-12 Password Setting for Manager - Ability to set manager’s password. ex) set to 2222. PASSWORD Manager password ※ Default password is set to 2222.
4.4. Other Features 1. Waiting Count & Waiting Time 1-1 Shows List of Waiting Count - Ability to count number of waiting customers - Automatically shows registered Coaster number to the Transmitter when picked up from the Coaster Base to give to a customer. ex) When Coaster #7 is picked up from the Coaster Base. remove Coaster from Coaster Base ※ To prevent conflict on auto display of registered Coaster number to the Transmitter, the Coaster is set to 2 – 5 seconds randomly.
2. Call & Message Call List 2-1 Displays Call List (Coaster & Staff Pager) - Shows call time and registered Coaster number which was paged. ※ Shows up to 150 called list. It will automatically delete oldest call list once the list reaches 150 to show latest call list. ※ Call list will initialize once the Transmitter’s power is off or reset. 2-2 Display Message Call List (Staff Pager) - Shows call time and registered pager number which was paged to the Staff Pager. ※ Shows up to 150 Message Called List.
5. Low Battery Indicator 5-1 Low Battery display - Displays when there’s not enough battery power. ※ Note : Call cannot be made in Low Battery mode and setting will not be saved. ※ Internal battery is to support temporary use in case of power loss only. Recommended to use with the A/C adaptor connected..
5. Description of Coaster 1. Register 6. RF Test - Coaster must be registered to Transmitter. It will not receive if not registered. (see page11, 1-6 “Coaster/Staff Pager Registration” ) -Check receiving range (see page 15, 2-10 “RF Test”) - Response to periodically sent message from the Transmitter - LED &Buzzer Alert when message received 2.
6. Description of Staff Pager 6.1. Menu ② ② ① ③ 02:57P ① 1. [Call] 02:57P 01/01/12 01/01/12 ③ ④ 1.1 [Inbox] ① Index : The order of message received ② Message : Received message ③ Date : Received date & time ① PIN [900] ② User [Steve] 1. Main Menu ① ② ③ ④ [Inbox] : Menu to check received message [INFO] : Check PIN & User Name [Config] : Set alert type, date, power down Date : Display time and date 1.
6.2. Button Configuration ① ② ③ ④ ⑤ 1.3 [Config] ① ② ③ ④ ⑤ Beep : Buzzer Alert Vibration : Vibrate Alert Beep+VIbration : Buzzer and Vibrate Alert Set Time : Time setting Power Down : Power off 2.1 - Use to move left and right - Use to navigate through the menu 2.2 -Use to go back to previous menu 2.
6.3. Functional Description 1. Register 4. Power Down -Staff Pager must be registered to Transmitter. It will not receive if not registered. (see page11, 1-6 “Coaster/Staff Pager Registration” ) - Displays PIN from the [INFO] menu - Function to turn power off when not in use - Power Down setting from the [Config] menu - Back to normal operation when is pressed for 5 seconds 2.
7.
