ReFLEX Two Way Messaging Device User’s Guide (AT 100) ATCOM WIRELESS 1
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
MAY BE OF SUFFICIENT MAGNITUDE TO CONSTITUTE A RISK OF ELECTRIC SHOCK TO PERSONS. THIS SYMBOL IS INTENDED TO ALERT THE USER TO THE PERSENCE OF INPORTANT OPERATING AND MAINTENANCE (SERVICING) INSTRUCTIONS IN THE LITERATURE ACCOMPANYING THE APPLIANCE. CAUTION Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type.
Welcome ................................................................... 4 Getting Started ........................................................... 5 What’s in the Box? ............................................................... 5 The Home Screen ................................................................. 6 The Keyboard ......................................... ............................ 7 How to Key in Capital Letter ………………………………….. 8 How to use ALT key …………………………………………..
Customized .............................................................. 37 How to Set Up Time & Date ........................................... 38 How to Set Alert” …………………………....................... 40 How to Set Display ……….............................................. 45 How to Edit Quick Text ……………………………………. 46 How to make a Custom replies ……………………………..
Welcome Thanks for your selecting Hosoe’s ReFLEX Two Way Messaging Device, AT 100. The device is designed for user’s convenient in sending or receiving a message through device or internet. Please be advised following brief description for Main Menu; Mail Box( Reading a received message or information from other device or Internet. ) And you can repose to the received message or information, or you can forward the received it to the others.
Getting Started What’s in the Box? *Note : Backup Link Cable PC & CD-ROM are option one The Battery and Charger The device operates with rechargeable Li-ion battery. The long lasting rechargeable Li-ion battery will continuous about one (1) year. You are recommended to replace the battery for one year interval. The battery charger will be operated on 110V, 60Hz.
approximately 2 hours for full charging. 1. During the charging, the red light will be lit. 2. If the battery is in full charging, the LED of device will be turn to yellow. The PC Interface Port & Cable –Optional item If you want to store , back up, or import & export the data , mail ,and address to your Personal Computer, the cable will be used for interconnected with device and Personal Computer. The specific back up program is required to o storing or back up the data and information.
Status Icon The Status indicator icon will be 4 kinds as follows;. - Alert Type There are four (4) kind of alert sound i.e. bell sound, vibration, Vibration + Bell sound, and LED and silent. The icon will be change depending on alert type setting in “Application” mode. - Battery Status Showing the battery status by 3 bars. If the Battery is in full status, the number of bar will be three. - Alarm If you set the Alarm as “Enable” in “Application” mode, the icon will be displayed.
If you are to key in the small letter, just key in the letter using key pad, but if you are to key in the capital letter, press the key once. If you press the key will be locked. To release the lock status, press again How to use key. key. If you are to use the yellow coded special letter, press the you want to write. release the key twice, the If you are to lock the key and press the key what key function, press it twice.
Special Key Description Key Description Escape Capital character Usage Return to proceeding screen, Cancel Action, and save data Capital letter will be key in. Alternative The yellow colored character will be key in. Delete/clear Character delete / (Alt+Del) clear Line Feed Line feed in Edit mode Backlight LED backlight On/Off Menu Space Enter Navigation Sub menu display Space Character and preview the alert sound in Alert mode setting.
Starting How to Turn On AT 100 To turn “ON” the AT 100, open the flip and press “ Enter” key for 2-3 seconds, then home screen will be displayed. How to Turn Off AT 100 Press the “D” key in main menu or move the cursor to ‘Device”, and press “Enter” key. Then “Device” related sub menu will be displayed as left picture. Then move to ‘Device”, and press the “Enter” key Select the “ Power Off” menu, and Select “YES” press and press “Enter”, then “Enter” key power of At 100 will be “OFF”.
Select “YES” or “NO” using navigation key, and press “Enter”. If you select “YES”, you can read the message. Mail box In Mailbox, there are three(3) sub menus. The first one is “ Inbox”(received message). Please be advised that the Information related message will be stored in New/Info Folder. The seconds one is “Outbox (sent message). The third one is draft message, and it will be stored in “Draft box.. Select the Mailbox in main screen, press “Enter”.
stored in “Draft”. “Inbox” Message (Received Messages) How to Reading a Message Move the black bar to ‘Inbox” and press “Enter”. The number of Inbox show you the number of total and unread one. Then all messages will be displayed with serial number and title of message. The nine (9) messages will be displayed in one screen. The read message will be marked messages will be marked will be marked ( icon, the unread icon and the forwarded message ) icon.
Message Options List 1) Next Message If there are another message, press “Enter”. Then next message will be displayed. 2) Forward message You can forward the message to others . If you select “Forward Message”, and press “Enter”. The screen will goes to “Select Address” menu of ‘Address book. Then Key in the address or select the address, and press “Enter Select “ Address Type” using navigation key, and press ‘Enter”.
Then “Message Deleted” pop up window will be displayed for a seconds, and the screen goes to “ Inbox” list. 4) Move to Folder It will be used for store the message in “Folders”. *Note : The message number exceed 100 messages in Inbox, the oldest one will be deleted and the new one will be stored in Inbox. How to Delete Messages . - How to Delete All Message in “Mail Box “ mode In “ Mailbox” mode, select Inbox.
- How to Delete Individual Message in “Mail Box “ mode Move the cursor to “Inbox” using navigation key, and press “Menu” key. Then select “ Delete Read Msg.”, and press “ Enter” key. Then AT 100 ask you whether you will delete it or not, then select “ YES” using navigation key to delete message and press “Enter” .
“Outbox” Message ( Sent Message) How to Reading a Message Press “Enter” after select the “Outbox” on ”Mailbox” list. The number of “Outbox’ show the number of message ( failed message number is 4 and total sent message is 12). Press “ Enter” key to review the list of sent message. If there are five(5) messages in “Outbox”. failed ( The two messages are ) in sending, the two(2) messages are in sending , and one is on the way to sending ( successes( ) ).
Select the “ Resend Message”, and press “Enter”. Then “Sending” pop up message will be displayed for a second, and the screen will be returned to “Mailbox” mode. - Forward Message : same as “Inbox” - Delete Message : It will be used to delete individual message, and the How to delete a message is same as “Inbox” - Move to Folder : same as “Inbox” It will be used for store the message in “Folders”.
Then AT 100 ask you whether you will delete the message or not , and select the YES and using navigation key to delete the messages press “Enter” key. Then “ Messages Deleted” pop up message will be displayed for a second, and the screen goes to “Mailbox” mode. Compose How to Composing a Messages Select "Compose" in main menu, and press “Enter”. Then new screen will be appears to compose a message. After the complete the message using key pad , press “Enter” to go to select the ‘Address”.
Select one of address on the list. You can select Group Address and /or “contact” address using “Line feed” key ( ), and press “Enter” key. Otherwise, if you want to send to new address, select “ Onetime Address” and press “Enter” key. If you select and press “Onetime Address”, you can choose the address type. Select one of address type using navigation key and press “Enter” key, Then window will be displayed to key in the proper Address , press ”Enter” key after the key in the address.
During composing a message, press “Menu” key,” If you move the cursor by left and right key in Navigation key, you see all special mark and character. Select the one and press ‘Enter”. How to make MCR List . MCR means “Multi Choice Reply “. That means message receiver can reply to receiving message selectively by the sender’s option. You can make up to eight(8) MCR list.. After the No.1 and press “enter”. And type what you want to compose. Then press ‘Enter. The cursor will move to No.
Address Book Address book is divided into two, Contacts list You can sore up to 250 address in Contact list. telephone number , address and etc. for individual and the other one is Each address will You can ten( 10) Groups List. information field. i.e. store the 20 Group and each group can store up to 20 individual address. How to register “New Contact” Select the “Address Book” in Main Menu, and press “Enter”. . Select the New Contact Then pop up Continue and press ‘Enter”.
If you skip the a list, there will be no mark( ) in front of that list. Press “Enter” after select “ Email Address.” . If you key in the following address;. abc@abc.com The following procedure are required;. After that press “Enter” to store, then black bar will be in next list “ Email Address #2. If you are to stop the further works, press ‘ESC”. Then pop up message will be displayed as left screen. If you press “YES”, the information will be stored and back to previous menu.
Select the “Contacts” on list and press “Enter”. Select one among list and press “Enter” . For example, select “ Tomas" and press “Enter”. Or key in the name on search window and press “Enter”. . Then registered address and information will be appears. If you press “Enter”, the screen will turn to Address Option. How to Register New Group Address To make Group list, select the ”New Group” and press “Enter”. Then pop up window will be appeared, then make group name using key pad and press “Enter”.
To add the address that Group, select Then select "Add Entry" , and press “Enter”. entry in “Contact” list. Select one of address among list by “Line Feed Key”. Then the stored address type will be displayed Then select one of address in pop up window. by “Line Feed Key” ” to add. You can add another address as same way. After the selecting address, press ‘Enter” to add and return to previous menu screen.
If you are to save the Group Address, select “save Group” “Enter”. .( and press ) Then “Group Saved” pop up message appears and go to sub menu of Address book Addresses Options – “Contacts” Select “Contacts” “Address Book” main menu. And select one of “Contact” ”, and press “Menu” Key. The three(3) Address option will be displayed. - Send Message This option will be used to send a message using registered address. If you select “ Tomas” in Contact list, and press “Menu” key.
Then black bar will goes to “ Send Message” menu. You can also modify or review the message before sending a message by “ Compose Message”. If you are to send the message, select “ Send Address” and press “Enter”. If the message is forwarding, the “ Sending" pop up message will be appeared for seconds and try to sending. If you are to send test message automatically at the interval of two(2) minutes, select the “Test (will be del)” , and press “Enter”.
To save the changed information and data , select “Save Entry” and press “Enter” or press ‘ESC”. Then “Save Entry “ pop up will be displayed and select “YES’ or “NO” by navigation key, and press Enter. Then the screen goes “Contacts” menu. - “Delete Entry” If you are to delete the “Contact “, select ‘ Delete Entry”. Press ‘Enter”. Then “ Delete Entry” pop up will ask you whether your will delete the ‘Contact” or not.
Select one of Groups, and press “Menu”. - Send Message Select “ Send Message”, and press “Enter” . You can compose a message following to “How to Compose”, and press ”Enter” after the completion. Select “ Send Message”, then the message will be sent to with “ Sending” pop up message. If the message is sent completely, the “ Message sent” pop up message will be displayed for a seconds.
You can change the Group name, add or delete contacts. After the change what you want to do, review the changed address of the group by “review Entry” To save and return to previous menu, select “Save Group”. Then “Group Saved’ pop will be displayed for seconds and return to main menu of “Address Book” - Delete Group Select “ Delete Group”, and press “Enter” Then “Delete Group? “ pop up message will be displayed,.
When you select of Holder, and press “Enter. If there is no receiving message, “ No Message” pop up message will be appeared. How to make “ Folder Name” and “Enable Folder” You can make folder name in each folder. Select the folder and press ‘Menu’ key . Select “Folder Name”, and press “Enter”. You can make the title of folder. For example, type the name as “ Info Service 1”, and press “Enter”. And black bar place on “Enable Folder”.
-Delete Read Msgs Select “ Delete Read Msgs” on list, and press ‘Enter” This feature will be used to delete what you read one. - Delete All Msgs Select “ Delete All Msgs on list, press “Enter. This feature will be used to delete all messages in that folder. Folder Select the “Folders" in main menu and press The three. folder available. You can “Enter”. make the title of each Folder. Select the folder and press “Menu” key.
Pop up window will be displayed to key in the name. After the key in the name, press ‘Enter” to store the name, or press ”ESC” key to escape to previous screen. How to “Delete All Msgs” in Folder Select specific Folder, and press “Menu” key. Select “ Delete All Msgs”, and press “Enter” Then pop up window will be displayed to ask you whether you will delete it or not. If you select “YES”, then “ All Msgs Deleted” pop up message will be displayed for a seconds, and return to Folder main screen.
How to read “Folder” message Select specific Folder in main screen, and press “Enter” Then stored message will be listed. Select one of them, press “Enter”. Then message contents will be displayed. If you press “Menu” key, you can Forward, delete and move to the other Folder the message. For details, please refer to “Mailbox” description. Applications The function will be used for user convenience. Alarm You can set alarm for specific time and date Select the “ Alarm ” and press “Enter”.
To activate the alarm, select “Enable Alarm”, and press “Enter”. Then “Enable “ YES” or NO” select one pop up window will be displayed, and it using navigation key and press ‘Enter”. Then screen goes to next step to set periodicity of alarm. Select “Period” and press “Enter” Then “Period” pop up message will be displayed, Select one of the tree, and press “Enter” Then screen goes to next step “ Alert type”, hen press “Enter”. Sect one of four alert type, and press “Enter”.
Then screen goes to “Alarm Time”, then press “Enter” to set the alarm time. Then ‘Alarm Time” pop up window will be displayed. You can set time and date using navigation key. To adjust the time, “ “ “ and “ “ and“ “ use the key , and move to next digit use the “ key. After the completion of adjustment, press “Enter” Then screen goes to next menus “ Snooze”. Press “Enter” to set the “Snooze” Select one of four menu, and press “Enter”.
Then cursor will be placed on hour digits, select the hour by up and down key. Move the cursor to set minute digit by right key, and the digit can be changed by up and down key. After the set the time, press ‘Enter”. Then key in the memo, and press the “Enter” . Then screen goes to calendar mode, and the date will be marked as ( ) on the day. If you add the new schedule, repeat the above procedure. Game (Block Down) Select Game(Block Down), and press “Enter”.
To start the game, press “Enter” If you are to quit the game, press “ESC”, and if you are start new game, press “Enter”. Customize Select the “Customize” in main menu and press “Enter”. There are seven (7) sub menu in ‘Customize”. How to “Set up” Time & Date It will be used to set time and date, transmitter, and private time.
Then black bar will be located on “ Time Format” menu, then press “Enter” There are two type of time format as AM/PM and 24hours. Select one of them, and press “Enter” . Then screen goes to “Set Time & Date” menu. Press “Enter” You can set the hour using up ( move to minute set by right ( ) and down( ) key, ) key , and set the digits same way as hours. Date also can be set as time setting way. After the completion of Time and date set, press “Enter” or “ESC” to escape.
Transmitter Transmitter Set up used to transmitter ON/OFF of Device ( AT 100). Select the Then “TX” “ Transmitter” and press “Enter”. set pop up window “ON” or “OFF” using up ( will be displayed. ) and down( Select the ) key, and press “Enter”. If you want to remain as it was, press “ESC”.. Set Private Time If you set Private time, the AT 100 will not alert during Private Time even if AT 100 receive the message. But the “Alarm’ will be activated during “Private Time”.
“How to set “ Alert” Select “Audio” and press “Enter in “Customize” menu. Select “Alert set” and press ‘Enter” to set the alert type of message. How to set Mailbox Alert To set the Mailbox alert sound, select ‘ Mailbox Alert” and press “Enter”. Select what you want to set, and press “Enter”. The “ “ mark means existing set mode.
Vibration Mode. Select “Vibrate” on “ Set Type” mode, and press “Enter” to escape . The “ “ mark will be displayed on home screen. . Vibration + Bell Mode. In Alert Type” mode, select “ Vibrate + Bell, and press “Enter” to select ‘ Alert” sound. . Then bell list screen “Enter”. The “ appears. Select one of them, and press “mark will be appears on home screen. Silent Mode Select “ No Alert” in “Alert Type” mode, and press Enter” Then “ “ mark will be displayed on home screen.
The black bar will be placed on “Enable reminder”, then press “Enter” “ Enable “ pop up window will be displayed, and select “ YES” to activate reminder call. Then press “Enter” Then black bar moves to “Re-Alert” to set the number of alert time. Press “Enter” to go to next step. “Re-Alert” pop up window will be displayed to set the times, and select one of them and press “Enter” Then black bar moves to “ Period” to set the interval. Press “Enter” to go to next step.
How to set “News/Info Alert” You can set the different alert sound with Mailbox. And the procedure will be same with “ How to Set “ Mailbox Alert” Volume Control Select “Volume Control in “Audio” mode, and press “Enter”. The level is three(3)) step. The value can set by left( right( ) and ) key. To set the level, press “Enter” after the set the value. Key Click Select the “ Key Click” in “Audio” mode, and press ‘Enter”.
“Quiet Mode” Select the” Quite Mode in “Audio” Mode, and press “Enter” Then pop up window will be appeared, then select of the them, and press “Enter” If you press “ESC”, the previously set value will be stores. If you set “ON”, the “ “ mark will be displayed on Home screen, and the alert sound will not be activated. How to set “Display “ Mode Contrast To adjust the contract of screen, select “ Contrast” in Display and press ”Enter”.
There are four (5) kinds intervals.. For example, if select “1 Minute” If there is no any key in or sending or receiving message for one(1) minute, the AT 100 will be . in power save mode. Select one of them, and press “Enter”. If you press “ESC”, the previous set value will be stored. “Font” You can choose the font thickness. Then select “ Font” in “Display” mode, and press ‘Enter” .Select ‘BOLD or ”NORMAL’ using navigation key . And press ‘Enter’ to store .
How to Edit Quick Text You can use the pre composed canned message e during composing a message. You can make 10 sentences, and one sentence can be up to sixteen character. If you are to use the sentence during composing, press “Menu” key. Select the “ Edit Quick Text” in “ Customized” menu, and press “Enter”. Select the location using up( ) & down ( ) key of navigation key, press “Enter”. Key in the sentence up to 16 characters, and press ‘Enter”. As same way, you can make the ten (10)text.
How to Make Custom It is Replies available in Inbox. The pre composed sentence will be used to reply to e-mail or message. It will be used for instance reply like Canned message and MCR list. You can make up ten (10) sentence and each sentence will be made up to sixteen (16) characters. Select “ Custom Reply” in “customized” menu, and press “Enter”. Then you can compose a sentence. Select the location, and press “Enter”. Then you can edit the sentence.
How to make Signature To add the your signature at the end of sending message, you can store your signature. Select the “"Signature", and press “Enter”. You can select “ON” or “OFF” by left & right key of navigation, and press “Enter”. Then you can key in your signature. After the key in the signature, press “Enter” to store it. How to Edit My Info This feature will be useful when you lost the device. In this menu, you can memorized the address , and telephone number, and you can put the password.
If there is existing Password, the cursor is located in “ ON” mark. If you are to store the existing password, press “Enter” If you are to change the password, select “ ON” and press “Enter”. Then you can key in the new password and press ‘Enter” to store it. ( **** ) If there is no password, the screen will be appeared as left figure. Then key in the password, and press “Enter”. In this case, the password function will not be activated. But if you don’t want to store the password, press ”ESC”.
After the completion of key in, select “ Save My Info” and press “Enter” to save the information. Then “Save My Info ?” pop up window will be displayed to ask you whether you will save the information or not. Select one of them, and press “Enter” If you select “YES”, then “My Info Saved” pop up displayed for a Seconds and return to “ Edit My Info” menu. ” Review My Info Then you can review what you stored information on “ Review My Info”. To review, press “Enter” on “ Review My Info” menu.
Device You can set and check the “ Power Off, Battery status, Memory Status and device related information. Select “Device “ in main menu, and press “Enter” Power Off To turn off the power of device, select “Power Off”, and press ‘Enter. Then “Power Off” pop up window will be displayed , select “YES” and press “Enter” Then power will be “OFF” Battery Status Check To check the battery status, move the black bar to ”Battery ” and press “Enter”.
Memory Status Check To check the memory status, select the “ Memory”, and press ‘Enter”. There are two memory category, one is r Message related one , the other one is address related one. To review more details, press, “Enter”. The detailed memory state of each Box will be shown. And press “Enter”, then return to sub menu of Device. About Select “About”, and press “Enter” The other information related to device will be displayed.
Appendix 1 : ICON List Num Icon Description Num Icon Description 001 Inbox, Next Message 055 Transmitter “ON” 002 Out Box 056 Transmitter “OFF” 003 Drafts, Compose Message, 057 Private Time Edit Entry 004 Back 058 Time Format 005 MCR 059 Network Sync, Enable Private 006 Unread Message 060 Military Hour 007 Read Message 061 Twenty Hours 008 Message Forwarding or 062 Volume Control 063 Key Click Standby 009 Send Message, Resend Message 010 Sending failure 064 Contr
030 Fax Number 084 031 Company Name 085 032 Mailing Address 086 033 Save Entry 087 034 News/Info Service 088 035 Folder Name 089 036 Enable Folder 090 037 Alarm 091 038 Alarm Period 092 039 Alarm Type, Set Alert 093 040 Alarm Time, Set Time & Date 094 041 Snooze 095 042 Audio 096 043 Vibrate 097 044 Vibrate+ Bell 098 045 Quiet Mode 099 046 Choice Alert 100 047 Schedule 101 048 Game 102 049 Setup 103 050 Display 104 051 Quick Message 105 052
any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
SAFETY INFORMATION FOR FCC RF EXPOSURE WARNING! Read this information before using your phone CAUTION In August 1996, the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies.
Warranty ONE (1) YEAR STANDARD LIMITED WARRANTY AND PROVISION (U.S.A. ONLY) AT 100 warrants the pager against defects in material in workmanship under normal use and service for the period of time specified below. This express warranty is extended by AT 100, to the original end user purchaser only and is not assignable or transferable to any other party. This warranty sets forth the full extent of AT 100’s responsibilities regarding the pager.
numbers don’t match the housing. • Pagers that have been opened by, or had work performed by, anyone other than a AT 100 authorized pager service center. • Pagers received with non-conforming or non-AT 100 housing or parts. Flat rate repair fees apply to pagers and accessories not covered under warranty.