Data Sheet

YXM-121
DTP-800 SERIES
Available in the following lengths:
2m (6.6 ft.), 3m(9.9 ft.), 4m(13.2 ft.) , 5m(16.5 ft.), 7m(23.1 f t.).
13 => n/a
25 => Ground
12 => Negative
24 => Positive
11 => Ground
23 => Negative
10 => Positive
22 => Ground
9 => Negative
21 => Positive
8 => Ground
20 => Negative
7 => Positive
19 => Ground
6 => Negative
18 => Positive
5 => Ground
17 => Negative
4 => Positive
16 => Ground
3 => Negative
15 => Positive
2 => Ground
14 => Negative
1 => Positive
Channel 8
Channel 7
Channel 6
Channel 5
Channel 4
Channel 3
Channel 2
Channel 1
13
14
25
1
NOTE: this view is from the “INSIDE” of the Multi-pin
(D-Sub) connector. It depicts the view as seen from
the solder terminals. The MALE pins are on the
other side. This is essentially a “Mirror” view.
Pinout Diagram
TIP = POSITIVE
RING = NEGATIVE
SLEEVE = GROUND
Enlarged, Not To Scale.
HOSA TECHNOLOGY , 6650 CABALLERO BLVD., BUENA PARK, CA 90620
PHONE: [phone] FAX: [phone]
DTP-800 SERIES
Balanced Snake, DB25 to 1/4 in TRS, 8 ch