Instructions Notes

WIC-001
WIRELESS CHARGER
Product Specifications
Instructions Notes
Product Overview Product map
Internal magnetic induction coil of cellphone
LED Indicator
Sensor zone
Product Name
Wireless Charger
WIC-001
Diameter≈99.9mm,
Wireless charger ×1,
Charging cable ×1,
Instruction book ×1
≤8mm
Compatible iPhone Xs
Max/XS/XR/X/8/
8 Plus, Galaxy S9/
S9+/S8/S8+/Note 8
and More.
Model
Size
Net Weight
Input
Charging Induction Distance
Applicable Model
Product List
5V 2A, 9V 1.67A
Charging Induction Distance: The induction distance
between the mobile phone’s inner induction and that
of charger is ≤8mm, and please do not use a case
which is too thick while charging.
1. When the wireless charger is power on, the green
light is always on for 5 seconds before it goes out,
which means the charger goes into standby.
2.
Put mobile phone in the induction zone, and then
green light will keep flashing and indicates that the
phone is charging.
3. When the wireless charger senses metal objects
other than mobile phones, red light will keep flashing
and the charger will turn on charging protection.
4.When the cell phone is full of electricity，the green
light enters the constant mode，indicating that the cell
phone is full of electricity.
5.Warm Tips:
Device can be charged only when it meets Qi
standards.For Fast Charging mode, a Quick Charge
2.0/3.0 Adapter is required.
If Charged with case, please make sure the case is
within 4mm and there’s no metal, coins, IC Cards,
bank cards and magnetic material.
Shenzhen Horn Audio Co.,Ltd.
Add：NO.6 4th GuiHua Road, PingShan, Shenzhen, P.R.China
Tel：[phone]
Web：www.szhorn.com
This equipment has been tested and found to comply with
the limits for a WPC device, pursuant to Part 18 of the FCC
Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential
installation.
CAUTION: Changes or modifications not expressly approved
by the party responsible for compliance could void the
user’s authority to operate the product.
NOTE: This equipment has been tested and found to comply
with the limits for a wireless power charger, pursuant to
Part 18 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference
in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or
more of the following measures:
1. Please do not disassemble, impact, crush it or throw
this product into the fire.
2. Please do not use the wireless charger under severe
high temperature, humidity, or corrosive environment
to avoid the circuit being damaged, which will lead to
infinite leakage.
3. Please keep it away from magnetic card(ID Card or
Bank Card) with magnetic stripe or chip, for it may
cause magnetic failure.
4. Please don't put metal or metal case on the charger.
5. Please keep the distance between the implanted
medical device (pacemaker, implant cochlea, etc.) and
wireless charger at least 20cm.
6. Please keep the charger away from water or other
liquid.
7. If the charger needs cleaning, please make sure the
power is off.
8. Please do not let children play it as a toy.
9. Please keep the temperature is between 0℃ to 45℃
when yo using it.
FCC ID: ZXC-WIC-001
Internal magnetic induction
USB-C input port
coil of wireless charger
Phone
Wireless
charger
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for
help.
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm
between the radiator and your body. This transmitter must not
be co-located or operating in conjunction with any other
antenna or transmitter.
Frequency Band
Thickness≈10.4mm
≈66g
108.65kHz-148.24kHz
H-field Strenght
16.73dBµA/m 10m