Ｕｓｅｒ's Ｕｓｅｒ's Manual Preparation day ： 30/June/2009 Product Name ：ＷＩＲＥＬＥＳＳ ＭＯＤＵＬＥ Model Name ：１５００＃ １５００＃００‑ ００‑Ａ （Model Number） Number） 1/12
Revision hysteresis. Date Edition number 30/July/2009 First version Revision content First version publication 2/14 Writer T.
■On safety design Though our company has paid close attention to quality, semi‑conductive products can malfunction and fail. Our company has gone to great lengths to create a safe product which does not cause any injury accidents, fire accidents, public harm, etc., and incorporated safety features such as fire prevention and malfunction prevention into our design.
Contents １．Application range ５ ２．General specification ６ ３．Usage ８ ４．Radio specification １０ ５．Precautions for each standard １１ ６．Requirements to end product １３ 4/14
１．Application range 1‑1 Application This specification is applied to the following. Product Name： Model Name ： (Model Number) WIRELESS MODULE 1500＃00‑A 1‑2 Applicable with Sony Computer Entertainment 『Playstation3』 ※1500＃00‑A is a radio module. This is a transceiver module and requires it to be placed within an external input device to operate. It must be used with model number 1500＃00‑B as a set.
２．General specification 2‑1 Shape and dimension Dimension Mass : : Approximately 30mm× 39mm× 12mm About 8ｇ 2‑2 Operational temperature and humidity range Temperature Humidity ： ： （In operation） 0℃〜＋40℃ 20〜25％RH (Assuming there is no dew condensation.) 2‑3 Storage temperature and humidity range （In storage） Temperature Humidity ： ： ‑25℃〜＋60℃ 20〜85％RH (Assuming there is no dew condensation.) 2‑4 Function This product is a radio module.
2-6 Connection unit number 1500#00‑B communicates one‑to‑one with 1500#00‑A. A maximum 7 sets of 1500＃00‑A and 1500＃00‑B, can be connected to one 『Playstation3』. Also, in the presence of multiple『Playstation3』, a maximum 25 sets of 1500#00‑A and 1500＃00‑B can be connected simultaneously. 2‑7 Power Input voltage ： DC+1．8〜3.3V（Supplied from 2 batteries） Consumption current :5mA (In normal operation) 2‑8 Communication range The communication range of the radio communication is within 10m.
３．Usage 3‑1 Connection method ① The HP3‑1500A is mounted on an external device as part of the controller. ※From this point forward, the device will be referred to as controller with 1500#00‑A mounted. ② 1500#00‑B is connected with the USB port of the Playstation3 console. ③ 1500#00‑B communication indicator LED flashes on and off. （Light will turn on and off every 250msec intervals.） ④ The controller with 1500＃00‑A mounted is supplied with power. （DC+1.8V〜3.
3‑3 16 Input PROG It is not used. 17 Input − It is not used.
４．Radio specification 4‑1 General specification Value/Note Parameter 4‑2 4‑2 Modulation system GFSK Spectrum diffusion process Frequency hopping Number of channels 25ch Frequency range 2405MHz〜2477MHz IC transmission output 0dBm[Max.] Data rate 1Mbps[Max.] Rock crystal vibrator frequency 16MHz Operating voltage DC+1.8V〜3.3V（Supply from 2 batteries.
５．Precautions for each standard 5‑1 FCC ClassB CAUTION: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
5‑3 IC and FCC（Radio） RF exposure compliance 1) To comply with FCC/IC RF exposure compliance requirements, a separation distance of at least 20 cm must be maintained between the antenna of this device and all persons. 2) This transmitter must not be co‑located or operating in conjunction with any other antenna or transmitter.
６．Requirements to end product This module must be integrated only by OEM integrators under the following conditions. (1) OEM integrator has to be aware not to provide information to the users regarding how to install or remove this module in the user s manual of the end product which integrate this module. Installation by end users is strictly prohibited. (2) Antenna OEM integrator shall use this module without any modifications including antenna.
(6) Compliance statement to FCC NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
