Swivel Tilt Arm Chair Assembly Instructions

Seven Seas Style:EC403 Assembly Instructions

Carefully unpack all parts and identify them with parts list before

attempting to assemble the chair.

IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL

YOU HAVE COMPLETED THE FINAL ASSEMBLY.

1. Car

efully remove the 5 STAR BASE(B) from the carton. The base is

located behind the fiberboard that is behind the chair UNIT

SEATING(G).

2. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B).

3. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B).

4. Attach MECHANISM (F) to the BODY SEATER (G) by SCREWS (D)

with FLAT WASHERS (E).

5. Insert the gas lift into the pre-assembled BODY SEATER to finish the

final assembly.

6. Be sure that all the screws are fully tightened before using.

Parts List

A. CASTERS 5

B. 5 STAR BASE 1

C. GAS LIFT 1

D. SCREWS (5/16”X1½” )

E. FLAT WASHERS 5

F. MECHANISM 1

G. BODY SEATER

H. ALLEN KEY

PAGE 1
Seven Seas Style:EC403 Assembly Instructions Carefully unpack all parts and identify them with parts list before attempting to assemble the chair. IMPORTANT: DO NOT TIGHTEN BOLTS AND SCREWS FULLY UNTIL YOU HAVE COMPLETED THE FINAL ASSEMBLY. G 1. Carefully remove the 5 STAR BASE(B) from the carton. The base is located behind the fiberboard that is behind the chair UNIT SEATING(G). 2. Put 5 CASTERS (A) into the holes of 5 STAR BASE (B). 3. Insert GAS LIFT (C) to the center hole top of 5 STAR BASE (B). 4.