Assembly Instructions

1/1

ASSEMBLY INSTRUCTION

ITEM# 1595-90006-BRN Mirror

1595-90002-BRN Eight-Drawer Dresser

** Please make sure you have all parts indicated below prior to assembly.

This unit is heavy and can best be assembled with the help of two or more people.

Cleaning Instruction: Clean finished parts with a damp cloth using a mild dishwashing liquid and water

solution. Polish the finish with soft cloth and an industry recognized furniture polish.

Diagram 1

This mirror can be assembled with two

kinds of dressers. Below are assembly

steps :

1. Insert locator dowels (B) to the pre-drilled

holes on wood supports (C ). (See diagram 1)

2. Place mirror on top of the dresser. Be sure to

position the mirror in middle of the top. The

back bottom edge of the mirror and the back

edge of the top should be flushed.

3. Attach wood supports (C) to the back of mirror

and dresser. Align locator dowels (B) on wood

supports to the holes on the back of mirror.

4. Tighten all screws (A) to the pre-drilled holes

on wood supports (C) by using Philips screw

driver.

Caution: Do not over tighten.

PAGE 1
ASSEMBLY INSTRUCTION ITEM# 1595-90006-BRN Mirror 1595-90002-BRN Eight-Drawer Dresser ** Please make sure you have all parts indicated below prior to assembly. This unit is heavy and can best be assembled with the help of two or more people. This mirror can be assembled with two kinds of dressers. Below are assembly steps : 1. Insert locator dowels (B) to the pre-drilled holes on wood supports (C ). (See diagram 1) 2. Place mirror on top of the dresser. Be sure to position the mirror in middle of the top.