Enjoy Hands-free Communication with HSP-B3 Headset HSP-B3 User Manual 1 / 10
HEADSET OVERVIEW FUNCTION STEP Power On/Pairing Power off Answer Telephone End up Calling Reject the Incoming call Call back last call Latest Number Redialing Volume up/Down Tap the Multi-function button Hold the Multi-function button for 5 sec Tap the Multi-function button Tap the Multi-function button Hold the Multi-function button for 2 sec Double-tap the Multi-function button Double-tap the Multi-function button Tap the Volume button up(+)or down(-) Previous/next Track Hold the Volume +/- button f
Charging Port 1，1.5~2.0h(Full charging): 5.0V 150mAh 2，Best performance with full battery Noise Cancelling Double Microphone Noise Cancelling for Wind Noise Reduction Microphone Mute Button During a call, tap the Mute button to mute the microphone. You will hear “mute on” prompt. Tap the Mute button again to open the microphone and hear “mute off” confirmation.
LED Light 1，Under charging: Red indicator is on; 2，After charging full: The blue indicator is on; 3，Low battery: Red indicator flashes twice with voice prompt H0W TO CONNECT Connect to Bluetooth devices 1 ， Power on & pairing status : press and hold the multi-function button until the indicator light flashes blue and red light, And you will hear the voice prompt “ Power on ” , Then the headset will antomatically enter the pairing status. 2 ， Activate Bluetooth and set it to search for new devices.
•Android™:Bluetooth: On > Scan for devices* •PC/Notebook: Bluetooth Setting: On > add a Bluetooth device 3，Select “HSP-B3” 4，Input password:0000 if needed(default password is 0000) NOTE: If your PC/Notebook does not support Bluetooth function or remind you need driver, you may need to use an external Bluetooth USB Adapter.
I， The mobile phone can’t find the headset Possible reasons: 1， The headset is not under ON and standby state; 2， The headset program is error; 3， The program of the mobile phone is error; Solutions: 1， After turning off the headset ,Hold the Multi-funtion button(red and blue indicator flashes by turn)to enable pairing state; 2， Recover the Wireless headset’s default settings; 3， After restart the mobile phone, remove all pairing data in the Wireless of the mobile phone; Cautions: 1， After the Wirele
otherwise, the headset will automatically turn off; 2， Hold the MF button and Mute button for 5 seconds at the same time when charging; II， No sound from the headset Possible Reasons: 1， The Volume of the mobile phone is unsuitable; 2， The Wireless headset and mobile phone are not connected correctly; 3， The Wireless headset is out of the working range; Solutions: 1， Adjust the volume in the mobile phone; 2， Operate with the reference of the use steps; 3， Keep the headset in the range of 10m to the mobile
2， Please use headset near the mobile phone to assure best effect; III， Charging red indicator doesn’t light on Possible Reasons: The headset has not been used for a long period; Solutions: Charge headset for about 30min,and then the red indicator may light on; Cautions: It will drop the capacity and service life of the battery if it is over charged or the Wireless headset is stored in the environment such as closed car; TECHNICAL SPECIFICATIONS Warning 1. The product is equipped with lithium battery.
2. This product can not be charged with a charger which output voltage is higher than 5V, otherwise it will burn out the headset by over-voltage. Frequently Asked Questions Why do I hear static noise on my headset? *Wireless devices are susceptible to interference that may affect audio quality and result in static. To avoid blocking the Bluetooth signal, follow these guidelines: 1. Make sure the distance between your headset and the paired device does not exceed 10 m. 2.
5. Avoid placing your mobile phone in a back pocket. *Note: Low battery capacity in your headset and mobile phone may affect the Bluetooth range.
