User's Manual
WLS-A04-09
WLS-A04-02
FCC
This device complies with part 15 of the FCC Rules. Operatiois
subject to the following two conditions : ( 1 ) This device maynot
cause harmful interference , and ( 2 ) this device must acceptany
interference received, including interference that may cause
undesired operation . This equipment has been testedand found
to comply with the limits for a Class B digital devicpursuant to
part 15 of the FCC Rules . These limits are designed to provide
reasonable protection against harmful interferencein a
residential installation . This equipment generates, usesInd can
radiate radio frequency energy and , if not installedand used in
accordance with the instructions , may causeharmful
interference to radio communications . However there is no
guarantee that interference will not occur in a particular
installation . If this equipment does cause harmful interference
to radio or television reception , which can be determined by
turning the equipment o and on , the user is encouraged to
try to correct the interference by one or more of the following
measures: Reorient or relocate the receiving antenna. Increase
the separation between the equipment and receiver. Connect
the equipment into an outlet on a circuit dierentfrom that to
which the receiver is connected. Consult the dealer or an
experienced radio / TV technician for help.
CAUTION : To comply with the limits of the Class B digital device,
pursuant to Part 15 of the FCC Rules , this device mustbe used
with certied peripherals and shielded cables . All peripherals
must be shielded and grounded . Operation with non-certied
peripherals or non-shielded cables may resultin interference to
radio or reception. Caution : Any changes or modications not
expressly approved by the party responsiblefor compliance
could void the users authority to operate the equipment .
FCC RADIATION EXPOSURE STATEMENT
This device complies with FCC’s RF radiation exposure limits set
forth for an uncontrolled environment under the following
conditions:
A separation distance of 20 cm or more should be maintained
between this device and persons during device operation. To
ensure compliance, operation at closer than this distance is not
recommended. The antenna used for this transmitter must not
be co-located in conjunction with any other antenna or
transmitter.
1. 2.
3.
back
Thank you for choosing our Omniklad freedom charge
cable with. To ensure optimal performance from this
product, please read this user manual carefully and keep it
safe for future reference, along with your receipt.
Do not disassemble the product in an attempt to modify,
repair or for any other purpose.
Do not store in high temperatures such as intense sunlight or
other forms of heat.
Do not place any magnetic strip cards or similar items (e.g.
credit cards, ATM cards, boarding passes etc.) near this
product as the magnetic data on this product may get
damaged.
Do not drop, knock, or shake this product. Keep your product
in dry area. Humidity and liquids may damage the parts or
electronic circuits.
Use the original or a certified cable only.
This is a mobile device and it is intended for desktop use.
Type-C Input
Hinge
Freedom Charge Cable
Viewing angles
User Manual
Output
wireless
Model: