Instruction Manual Congratulations on purchasing your Trio Personal Media Player! To get the most out of your purchase, please take the time to carefully read through this manual. Foreword If any problems occur during while using your Trio, please feel free to contact Mach Speed technical support at 580-272-0035, or send an email to mssupport@machspeed.com.
1. Before using the Device Before using the device, please read this chapter and teach your kids about this information. For further details, please refer to the safety instructions and announcement. 1.1. Acknowledgement Thanks for your purchase of our product. The product is a MID (Mobile Internet Device), with a touch screen native resolution of 800x480 pixels. It is designed with Boxchip A10 high speed processor and 1GB,DDR III and 8GB flash storage memory. The operating system is Android 4.0.
entering an area with unshielded high voltage. Subjecting the device to an area with a powerful magnetic field may erase all data on the device. This device can connect to the internet, and has access to chartrooms, messenger programs, etc. Please always supervise children using the device. Please comply with your areas rules and regulations regarding the use of electronic devices, and respect others’ privacy and legal rights while using the device. 2. Introduction 2.
Return icon downloading recent application icon Home icon Battery volume mark WIFI signal icon No SD card Alarm on Google search Application icon General Notice Mute 2.
Functions: Power (power) Press and hold this button to turn the device on and off. Tap this button briefly to put the player in standby or wake the player up. Vol + (up) Press to increase volume. Vol- (down) Press to decrease volume. Menu icon (menu) Tap it to open the current mode’s menu. HOME icon (home) Tap this icon to return to your home screen. Please note that this does NOT close any applications you have open, but just suspends them.
Standby mode Tapping the power button will place the device in standby mode, tapping it again will wake the player back up. Please note that if the player sits idle the device will enter standby mode automatically to conserve battery life. 3. Main interface UI Note- To scroll the screen left, place your finger on the left side of the screen and slide it to the right. To scroll right, place your finger on the right side of the screen and slide it to the left.
The second most used portion of your UI is the apps menu accessed by tapping the apps icon on the main menu. 3.1 Icon and application manangement 1) To move the icons on the Desktop: Press and hold an icon in your apps menu to drag it to your desktop.
icon, let go of the screen. 2).Delete the icons on the desktop Touch and hold desktop icons, then drag it to the “Remove” icon. Please note that this will only delete the icon from your desktop, the app will still be located in your apps menu. 3.2 Change the destop wallpaper 1) Touch and hold an empty spot on main screen, and a window will open with several selections. 2) Select the image gallary or wallpapers gallary to choose image. 4. USB Connection & input words 4.
inserted SD card and the internal memory.
1 2 3 4 5 Switch between caps and lowercase letters Switch between letter and symbol/number mode Spacebar Enter button Delete- tapping once will delete the last input character, press and hold to delete all entered characters 5.Basic settings 5.1 Voice and display 1) Sound and volume setting 1.Tap the Setting icon. 2.Tap Sound. 3.Tap volume to adjust the volume for music and video. 4.Or press “VOL +” or “VOL – Button” to adjust the volume.
2) Display setting Adjust the bightness of your screen 1. Tap the Setting icon. 2. Tap DisplayTap brightness and a slidebar will open. Slide this bar to the right to increase brightness, and to the left to decrease brightness. 3. Tap “OK”. 5.2 Adjust screen standby time 1). Tap the setting icon. 2). Tap display-> Tap “Sleep” and select the amount of idle time you want to pass before the device enters standby mode to conserve power.
5.4 Setting a screen lock. NOTE- If you set a password, PIN, or Pattern, and later forget this item, you will be LOCKED OUT of your device. For security purposes, we can NOT recover a lost password, PIN, or Pattern for you. You can set a password, PIN, or pattern to secure your device from unauthorized access and protect your privacy.
5.5 SD card and Internal memory 1) View SD card and MID memory available space 1. Tap the setting icon. 2. Tap memory. 3. View the available space on the SD card. 4. View internal memory space.
Please follow this procedure when removing the SD card to prevent damage to your SD card and files. 1. Tap the setting icon. 2. Tap memory. 3. Tap remove SD card. 4. Pull out the SD card. 5.6 Date and Time Manually adjust the date, time and time zone. 1) Tap the setting icon. 2) Scroll the screen down, and tap date and time. 3) Tap time zone, and choose your zone in the list. Scroll down to view more zone information. 4) Tap choose date formats, and tap the date formats in MID.
5.7 Setting the display Language 1) Tap the setting icon. 2) Tap language & input. 3) Tap language, and select the language you want. There are 60 languages to choose from. 6. About the tablet 6.1 System update Note - This setting is for advanced users only. If done improperly, your device may be damaged, as well as your data erased. Please exercise caution when updating. 1) Tap the setting icon. 2) Tap About tablet. 3) Tap System update, follow the onscreen instructions.
available and you have the updated file saved to your SD card. 7. Multi-Media 7.1 Your device supports the following media formats Audio file formats supported: MP3,WMA (nonencrypted),MP2,OGG,AAC,M4A,MA4,FLAC,APE,3GP,WAV Supported video formats: AVI(H.264、DIVX、DIVX、XVID), RM,RMVB, MKV(H.264、 DIVX、DIVX、XVID),WMV (non encrypted) ,MOV,MP4(.H.264、 MPEG、DIVX、XVID) ,DAT(VCD),VOB(DVD) ,PMP, MPEG, MPG, FLV(H.263,H.264) ,ASF ,TS, TP,3GP,MPG Supported image formats: JPEG (RGB), GIF, PNG, BMP 7.
Other Albums Random play Current playing songs Pause Album Cover Next song Artist Previous song 1) Find and play music 1. Tap the music application 2. Tap artist, album or play list. 3. Select any music to play. 2) Add music to a play list 1. Tap the music application 2. Enter to select music. 3. Tap and hold the music you want to add. 4. Tap “Add to playlist “, and select the playlist you wish to add your files to. 5. OR Tap “new”. 6. Input a name for your new play list. 7. Tap save.
3) Delete the music in a play list 1. Tap music. 2. Tap and hold the music you want delete from the play list. 3. In the pop up music setting menu, tap remove to finish. 7.3 Video 1) Enter video mode Tap the video application 1. Tap gallery or list selections. 2. The device will display all compatible video files. 3. Tap the file you want to play. 7.4 Images 1) View images 1. Tap the image gallery application. 2. This will bring up the image gallery, tap the file or folder you want to view 3.
After opening an image, tap the image again to bring up your menu and delete icons. Tapping the delete icon will allow you to delete the image.Tapping the menu icon will bring up your image submenu. Slideshow: Tap to enable slideshow mode Edit: Tap to edit the image. Rotate left/Rptate right: Tap to Rotate the image.
Zoom out View image and videos Tap to capture image & video Zoom in Swap between video and camera modes Tap to will show below picture Camera settings (Store location/Picture size/Restore defaults) White balance Exposure 1) To take pictures, ensure that your device is in camera mode: 2) Aim at the target you want take pictures of. 3) Tap the blue button to take images. Note: To avoid blurring your images, make sure that you hold the device steady and tap the blue button lightly.
Recording video a) Enusure your device is in video mode: b) Move the camera lens to the target you want to shoot. c) Tap the red button , the system starts to record video. While recording, the red button will display a white diamond. d) Touch the red button when finished recording. Reminder: Images and videos will save automatically. 8. Connecting to Wifi Your device connects to the internet using a built in Wi-FI antenna 1) Tap the Settings icon. 2) Slide WI-FI to the “on” position.
9.Email The Email application allows you to access an external POP3 or IMAP email account provider such as Yahoo, Gmail and 163. Note: Before setting up your Email, please ensure that you are connected to wifi. If you do not already know your email settings (POP3, IMAP, etc) you can obtain them from your email provider. 1. Tap the Email app. 2. An email setting guide will appear. 3. Enter your Email account address and paaword. 4. Tap the next button, choose your Email type: POP3 or IMAP. 5.
Delete an Email account You can delete the set POP3 or IMAP email account from your Device. 1. Tap Email. 2. Enter your inbox. 3. Touch the menu button. 4. Tap setting. 5. Select the account you wish to remove. 6. It will popup a menu list, select delete account. 7. Tap “OK” to delete. Sending E-mail 1. Tap Email to display your mail box. 2. Tap the inbox, it will refresh the new emails automatically; tap it to read new email.
3. Touch the button at the top of screen. 4. Input the receiver’s Email address in the receiver column. 5. Input subject and Email content. 6. Tap add attachment, touch menu button, it will pop up a menu. 7. Tap add attachment. 8. Select the attachment you want to send (pictures, videos) 9. Tap send button to send the email. 10. Internet 10.1 Browser 1) Opening and using the Browser Tap the Browser icon The Browser will open to the last page you visited.
10.3 Visit Webpage 1. Touch Browser icon 2. Input the website you want to search on the keyboard. 3. Tap finish to go to the website. 10.4 Bookmark management Setting Webpage bookmark 1. Go to any webpage. 2. Tap and select “OK” to add this website to your bookmarks. 10.5 Opening a bookmark 1. Tap , and it will show bookmark list in the Browser. 2. Tap the bookmark you want to open that webpage.
11 Other applications 11.1 Set an alarm 1. Enter the app menu. 2. Tap the clock application. 3. Tap “Set alarm”. 11.
You can use file manager to open, edit, and delete files and folders. 1. On the app menu, tap the file manager button 2. Tapping a file will pop up a list of applications you can use to open the file. Press and hold the item to copy, move, or delete the file. 12 12.1 Installation Applications Installation Install the third part application procedure While the main method of loading applications involves using an appstore, if you have an individual APK file, you can use that to install the app.
1. Tap Application. 2. Select the application you want to uninstall, tap uninstall. 3. Tap OK to finish uninstalling the app. 13 Troubleshooting 1. It takes a long time to power up when I power on for the first time. The first time you power the device on, or after updating the device, it may take as long as three minutes to power on as it intitallizes files. Subsequent power sequences should take less than a minute. 2. Sometimes, the device feels warm to the touch.
5. Sometimes, the device runs slowly. The more apps you have open and running, the slower the device will run. You can enter your application setting to disable or “kill” applications to free up processor and memory resources. In addition, there are many “Task Killer” applications which can do this. If at any point, you have questions about your player or experience an issue with your player, please feel free to contact our technicians at mssupport@machspeed.com or by phone at 580- 272- 0035.
misused, physically damaged, or subjected to abnormal working conditions (including, but not limited to, electrical, fire, and water damage). THIS WARRANTY DOES NOT GUARANTEE YOU UNINTERRUPTED SERVICE. REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE PURCHASER. To obtain service under this warranty, you must contact our Technical department at (580) 272-0035 to obtain an RMA number.
4. All RMA’s must be accompanied with a copy of original receipt or invoice with name, return address and phone number of customer. Exchanges: 1. Items will not be cross-shipped for any reason. 2. The original receipt or invoice must accompany all exchanges. 3. All exchanges must be shipped freight pre-paid by the customer and include a pre-paid shipping label for shipment back to the customer. Furthermore, the customer is expected to insure all items being shipped back.
refused shipment or unclaimed goods. 4. Mach Speed Technologies will make every reasonable effort to deliver on time however; Mach Speed Technologies will not be liable for late or lost shipments. Consequential Damages and Limitations: 1.