Xtreme User’s Manual Congratulations on purchasing your Xtreme Internet Tablet. To get the most out of your purchase, please take time to carefully read through this manual.
Foreword If any problems occur while using your Xtreme Internet Tablet, please feel free to contact Mach Speed technical support at 580-272-0035, or sending an email to mssupport@machspeed.com. Thank you for your support and cooperation! Mach Speed Technologies bears no responsibility for any damage or loss of personal data due to misuse of software and/or hardware, damage to the player caused by human factors, replacement of battery, or other unforeseen circumstances.
you are experiencing issues playing your files on this player, we recommend using a supported conversion tool to reconvert your file to the specifications of the device. Caution Modifications not approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE- This equipment has been tested and found to comply with the limits for Class B Digital device, pursuant to part 15 of the FCC rules.
3. There is no response if you operate on any button. Please always follow the correct disconnect procedures for your operating system. Do not disconnect power abruptly when the player is being formatted or in the process of uploading or downloading files. Otherwise it may lead to file corruption, firmware failure, and even hardware damage. We are not liable for any loss of data stored on this device. Please do not dismantle this player.
1. Basic Operations Powering ON and OFF Power on: Press and hold the power button for 3 seconds. Power off: Press and hold the power button for 3 seconds. Power monitoring and charging You can see the battery icon ion the upper right hand corner of most screens and monitor battery capacity , when the power runs out, the device will automatically turn off. When the screen shows low battery, users can use the computer to charge , it takes approximately 4 hours to fully charge.
New email Airplane mode USB is connected USB adjustment is connected Return icon Downloading Recent application icon Home icon Battery volume mark WIFI signal icon No SD card Alarm on Google search Application icon General Notice Mute Volume + and - System Notifications Home Screen When you power your player on, you come to your home screen.
have 5 home screens to add your applications and shortcuts to. Tap an icon to select a file or start an application. If you hold your finger on an icon for several seconds, you can move the icon around on the screen, or to a different screen. Home Screen Menu Tapping the submenu icon briefly will bring up your home screen menu. This menu allows you to manipulate wallpaper, manage apps and system settings. 3.
ebook files, etc. saved on the internal memory or SD card you have installed. Selecting one of these files will open the file in the appropriate program. Browser: Selecting this option will open your web browser. For detailed instructions, please refer to the “Main Functions” section below. Settings: This option will allow you to adjust most of your settings, including Wi-Fi, screen brightness, etc. For detailed instructions, please refer to the “Main Functions” section below. 4.
View current play list Random play Cover album cover of Repeat time Pause Artist Next song Album Music Previous song Played time Play progress bar Find and play music Music total time 1. Tap the music application. 2. Tap artist, album or play list. 3. Select any music to play. Add music to a play list 1. Tap the music application. 2. Enter to select music. 3. Tap and hold the music you want to add. 4. Tap “Add to playlist “, and select the play list you wish to add your files to. OR 1. Tap “new”.
2. Tap and hold the music you want to delete from the play list. 3. In the popup music setting menu, tap delete to finish. 4.2 Video Tap the video application 1. Tap gallery or list selections. 2. The device will display all compatible video files. 3. Tap the file you want play. 4.3 Images View images 1. Tap the image gallery application. 2. This will bring up the image gallery, tap the file or folder you want to view and 3. Tap the image you want to view, the system will view the image in full screen. 4.
“Wallpaper” Detalis: Tap to display image details, such as filename, creation date, dimensions, orientation, file size, path, etc. 5. Email The Email application allows you to access an external POP3 or IMAP email account provider such as Yahoo, Gmail and 163. Note: Before setting up your email, please ensure that you are connected to wifi. If you do not already know your email settings (POP3, IMAP, etc) you can obtain them from your email provider. 1. Tap the Email app. 2.
Delete an email account You can delete the set POP3 or IMAP email account from your Device. 1. Tap email. 2. Enter your inbox. 3. Touch the menu button. 4. Tap setting. 5. Select the account you wish to remove. 6. A menu list will appear, select delete account. 7. Tap Ok to delete. Sending E-mail 1. Tap Email to display your mail box. 2. Tap the inbox, it will refresh the new emails automatically; tap it to read new email. 3. Touch the button at the top of screen. 4.
8. Select the attachment you want to send (pictures, videos) to send the email. 9. Tap send button 6. Browser When you select the browser icon, your browser will open. You can tap the browser bar to bring up the virtual keyboard and input the web address you would like to view. The Browser will open to the last page you visited. If you have not opened the browser yet, it will go to your homepage. 1) Set the homepage. 1. Tap the browser icon 2. Tap the menu . icon on the top right corner. 3.
2) Visit webpage 1. Touch browser icon 2. Input the website you want to search on the keyboard. 3. Tap finish to go to the website. 3) Bookmark management Setting webpage bookmark 1. Go to any webpage. 2. Tap and select “OK” to add this website to bookmark. Opening a bookmark 1. Tap , and it will show bookmark list in the browser. 2.
7. System settings 7.1 Voice and display Sound and volume setting 1. Tap the setting icon. 2. Tap “Sound”. 3. Tap volume to adjust the volume for music and video. 4. Or press “VOL +” or “VOL – Button” to adjust the volume. Display setting Adjust the brightness of your screen 1. Tap the setting icon. 2. Tap displayTap brightness, a slide bar will open. Slide this bar to the right to increase brightness, and to the left to decrease brightness 3. Tap OK.
7.2 Adjust screen standby time 1. Tap the setting icon. 2. Tap display->Tap “Sleep”, select the amount of idle time you want to pass before the device enters standby mode to conserve power. 7.3 Setting a screen lock. NOTE- If you set a password, PIN, or Pattern, and later forget this item, you will be LOCKED OUT of your device. For security purposes, we can NOT recover a lost password, PIN, or Pattern for you.
7.4 SD card and Internal memory View SD card and MID memory available space 1. Tap the setting icon. 2. Tap memory. 3. View the available space on the SD card. 4. View internal memory space. Safely remove the SD card. Please follow this procedure when removing the SD card to prevent damage to your SD card and files 1. Tap the setting icon. 2. Tap memory. 3. Tap remove SD card. 4. Pull out the SD card.
7.5 Date and Time Manually adjust the date, time and time zone 1. Tap the setting icon. 2. Scroll the screen down, and tap date and time. 3. Tap time zone, and coose your zone in the list. scroll down to view more zone information. 4. Tap choose date formats, and tap the date formats in MID. 7.
1. Tap the setting icon. 2. Tap language & input. 3. Tap language, and select the language you want. There are 60 languages to choose from. 7.7. About the tablet System update Note- This setting is for advanced users only. If done improperly, your device may be damaged, as well as your data erased. Please exercise caution when updating. 1. Tap the setting icon. 2. Tap About tablet. 3. Tap System update, follow the onscreen instructions. 4.
8.2 Uninstall an app Tap the settings icon. 1. Tap Application. 2. Select the application you want to uninstall, tap uninstall. 3. Tap OK to finish uninstalling the app. 9. Troubleshooting 1. It takes a long time to power up when I power on for the first time. The first time you power the device on, or after updating the device, it may take a slong as 3 minutes to power on as it intitallizes files. Subsequent power sequences should take less than a minute 2. Sometimes, the device feels warm to the touch.
will run. You can enter your application setting to disable or “kill” applications to free up processor and memory resources. In addition, there are many “Task Killer” applications which can do this 10. Technical specifications OS CPU Android 4.0 ICS ARM cortex A8 processor DDR3 512MB (3D accelerator possible for 4D games) 7" TFT 800*480 Capacitive touch panel SDRAM Display Multi-touch screen Audio port USB port DC port Yes : 5 point multi-touch 2 / 4 / 8 / 16GB 3.
If at any point, you have questions about your player or experience an issue with your player, please feel free to contact our technicians at mssupport@machspeed.com or by phone at 580- 272 -0035. Limited Manufacturer’s Warranty 1. MACH SPEED products carry a one year from date of purchase warranty. This warranty is nontransferable. 2.
when returned “bad” items are found to have no problems or defects. 2. Items found to be out-of-warranty or not belonging to Mach Speed Technologies will not be replaced. Instead, they will be returned back to the customer freight-collect. 3. RMA’s will be shipped back to customer via UPS ground delivery. Express shipping will be at additional costs to the customer. 4. All RMA’s must be accompanied with a copy of original receipt or invoice with name, return address and phone number of customer.
deliver on time however; Mach Speed Technologies will not be liable for late or lost shipments. Consequential Damages and Limitations: 1.
FCC Statement. 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2)This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.