Quick Start Guide HONG KONG NATURAL SOUND ELECTRONICS LIMITED Trio Android 10.1 OD trio Follow the easy steps shown inside to get your Trio Tablet up and running.
STEP 1:CHECK OUT THE CONTROLS Before you do anything else,take a good look around your Trio Tablet and find out where all the control buttons and other items of interest are. Step 2: CHARGE THE BATTERY You need to charge up the battery before you use your TRIO tablet for the first time. Connect the charger to your TRIO, using the USB/Charger cable.The cable plugs in to the USB/Charger Port at the bottom of your Tablet.
Plug the charger into a power outlet.The screen will display a flashing battery symbol for a few seconds to show that the battery is charging.Keep the battery on charge for 6 to 8 hours to make sure that it is fully charged. How to Use Keyboard Case 1. Place the tablet inside of the anchors of the keyboard case and open the kickstand on the back. 2. Plug the USB cable of the case into the USB port of the tablet. 3. Type using the keyboard case keys when you would normally use the onscreen keyboard.
Touch the screen at the lock symbol and swipe sideways. The will unlock your tablet and display the desktop screen you will see the following symbol: Touch this symbol and Apps screen appears. Touch any icon on the Apps screen and it will open the application that you have chosen. You are now up and running! More Information To find out more about your Trio Tablet and its cool features,check out the user manual on the Trio website: www.triotablets.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.