ID2825B Instruction Manual Note: ● The playback times listed refer to the maximum playback times possible, while using the best power savings. The actual playback time may differ as adjustments to screen brightness, power savings modes, volume, etc., are made. ● There are many brands of Micro SD cards on the market, using different quality and speed standards.
using a supported conversion tool to reconvert your file to the specifications of the device. FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: -- Reorient or relocate the receiving antenna. --Increase the separation between the equipment and receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
There is no response if you tap an icon or press a button Please always follow the correct disconnect procedures for your operating system. Do not disconnect power abruptly when the player is being formatted or in the process of uploading or downloading files. Otherwise it may lead to file corruption, firmware failure, and even hardware damage. We are not liable for any loss of data stored on this device. Please do not dismantle this player.
formats Video player: for playing video of AVI, 3GP and FLV formats USB2.0 high speed transmission Basic Operation Power On Set the Power switch and hold to the ON/OFF position for several minutes to start the unit. Power Off Press and hold the Power button to the ON/OFF position for several minutes; 2.long pressing the M button.
the same steps as Music, above. Charging To charge the player, simply connect it to a powered USB port, or external AC adapter. If you choose to use a third party adapter, please ensure that it is 5V and between 350 and 1000mA, or 1amp Low Power When battery power is low, the player will prompt you, power off, and enter Standby mode automatically. Do not try to turn on the unit. You must charge again before using. Charger current specification recommended: 400-500mA.
face up (side with words aligned in the opposite direction of the display screen), and slide the card into the socket on the player, slightly past flush. When you hear the card click into place, you can access the card. Removing: Ensure that the player is powered off, and push the SD card just past flush. When you hear the click, release pressure, and the card will slide out.
2. Once you have named your MP3 player, select Finish, and your Windows Media Player will open to the Sync tab. 3.
screen) from the list on the left. Once you have selected the music you wish to add to the player, press Sync. 4. Windows Media player will load the songs on to your player.
5. Once all the songs you have added are synced to the unit, and Windows Media Player says that is safe to disconnect your MP3 player, disconnect the device. COPY AND PASTE Note- This alternate method is used to load videos, pictures, and Ebook files as well as audio files 1. Connect the MP3 player to a working USB port. 2. When the unit is connected to your computer, it will create a gray and green icon in the system tray (lower right hand corner of your desktop).
In there you will find a section called “devices with removable storage” 4. Locate the drive created by the unit, generally just called Removable Disk, with a letter in Parenthesis. Drive letters vary depending on your system configuration. 5. Open the drive by either double left clicking on the drive itself, or by right clicking to open the option menu then left click on the desired drive.
6. Locate the music stored on your computer. Generally this is stored in the “My Music” folder of your computer. NOTE: If you are unable to locate the music on your computer, click on start, search, files and folders, then search for “*.MP3, *.WMA”.
7. Once you have located the song files, you can right click on the song itself, and select “Copy”. Open the removable disk drive, right click on in the empty space, and select “Paste”. This will transfer the song on to your player. 8. Repeat step 7 for as many songs as you want to copy on to the unit. NOTE: MAC Computers When connected to your MAC computer, the device will act as a removable drive. Simply drag your files to the device.
Know Your Player Main Menu Interface This player provides a touch screen Operating System for direct operation. The main menu interface is shown in the picture below: 1. The battery is shown on the upper right corner of the main menu interface . 2. Under the main menu interface, choose and touch the icon on the screen, and the player will enter the selected mode.
3. After the player enters a mode, touch the icon on the bottom right corner to return to the main menu. Music Mode Plug the earphones into headphone jack. In the main interface, touch the “Music” icon to enter music mode. Music Interface Description Compatible with MP3, WMA and WAV formats.
Button /icon Description Number of the song being played / Total songs. Playing mode. Playing sequence. Playing style. Song playing progress bar. Drag the bar to adjust playing progress. Volume bar. Drag the bar to adjust volume. Touch it to skip to previous song, long touch for fast rewind. Touch the play icon (first icon), and the button will be changed to pause icon (second one). Touch it to skip to the next song, long touch for fast forward.
to enable an appropriate function. Icon Description Touch Browser to enter different song lists - main directory, card directory, all songs, ID3 list, play list, and tag list. Touch Settings to choose. Add list Add tag Touch Setting again to return to play screen. Song information display. to return to music Touch interface. Lyrics Display The player is compatible with lyrics files of “*.LRC” format and enables playing songs with synchronous lyrics.
video files loaded on the player. Note- this player will playback files which are in AVI (XVID), WMV (non encrypted), and FLV formats. If you are having a hard time viewing your video files, please convert them using the AVI conversion tool included with the player. If you want to delete the video, hit “delete” button or right click on the video. A box will open. Click on the word “delete” and the video will be removed from your mp3 player.
Play: touch and it will change to pause button , and touch again to continue playing. Touch it and the Volume bar will pop out at the bottom. Drag the bar to adjust volume. Return to main menu. Fast rewind: long touch for fast rewind. Short touch for the previous video file. Fast forward: long touch for fast forward. Short touch for the next video file. Photo Mode Photo mode will allow you to view your image files, whether they are photos, computer generated images, album art, etc.
dimensions before loading them to the player for optimum quality. Touch to change to the List mode. 2. Touch the thumbnail twice to browse pictures. Touch the picture, and the icons will appear automatically at the bottom of the screen.
Button Description Manual play: touch the icon, and the icon will change to , and touch again to enter auto play mode. Main directory and card directory: return to upper directory to browse picture list. Slide interval: 1 -5 seconds auto play. Previous picture Next picture Return to the main menu.
If you want to delete the photo, hit “delete” button or right click on the photo. A box will open. Click on the word “delete” and the photo will be removed from your MP3 player. E-book Mode The Ebook reader will allow you to view text files on your player, such as Ebooks and even notes you create using the built in note pad. Note- This player will display only Ebook and text files which are in .txt format. You can create these files using your windows “Notepad” or “WordPad” programs. 1.
Button Description /Icon Manual browse: touch it and it will change to enter auto browser mode. to Auto browser time setting: 10 seconds, 15 seconds, 20 seconds, 25 seconds, 30 seconds. Save and pick tag, touch to show the tag list, and then touch to save or select tag. or the part outside Save tag box Touch to exit from the tag setting box.
Skip to: touch to show “Skip to” dialogue box, and touch or to select the skip percentage. Touch outside part of the “Skip to” box to exit. TXT file browser: Touch for local directory, card directory.
If you want to delete the txt file, hit “delete” button or right click on the file. A box will open. Click on the word “delete” and the txt will be removed from your player. Camera The player comes with a 1.3MP digital camera built in which will allow you to snap pictures, record video, and even act as a webcam! Camera Interface 1. Desktop- Return to the Main Menu. 2. Self-timer- off, 5 sec, 15 sec, 20 sec. Default is off.
3. Space- Shows the remaining number of pictures you can take in your current settings, until the memory is full. 4. Swap- Swap between Camera and video recorder mode. 5. Picture Mode- Takes you to picture mode, and allows you to browse pictures you have taken. 6. Settings- Allows you to adjust the settings, including Special effects such as lens filters, File save path, whether there is a shutter sound, and whether you wish to have a date stamp added to your photos. 7.
from Auto, Daylight, Cloudy or Inside. 3. Brightness- Allows you to adjust the image brightness. 4. Swap- Swap between video recorder and Camera mode. 5. Video Mode- Takes you to video mode, and allows you to browse videos you have taken. 6. Settings- Allows you to adjust your brightness and save path. 7. Resolution- Allows you to change the size of video files you record.224x176, 176x144, 320x240.Default is 320x240. 8. Record- Tap the Video Record icon to start recording.
player. Tapping the or icons will adjust which month or year you are looking at. You can tap a date on the calendar to turn the date blue. Recorder Touch Recorder icon to enter Recorder mode.
Button /Icon Description Stop - touch it and it will change to to enter recording play icon mode. Touch it to save the recorded file. Touch it to view recorded file. Record settings - touch it to select: 1. Quality: high, medium, low. 2. Recoding gain volume: level 1, 2, 3. Desktop-touch it to return to the Main Menu. Touch “Back” to go back to the Application menu. Touch “Desktop” to return to the Main Menu.
Explorer Mode In the main interface, touch the “Explorer” icon to enter the Explorer mode: Flash Memory and Card Memory (not displayed if no card inserted). Touch Flash Memory to see. All files and file folders in the player can be listed, and the user may select and play the compatible music, video, e-book and picture files under this interface; or, the user may directly delete the selected files. Touch Desktop to return to the Main Menu.
application loaded to the player which is not described in the manual, please contact our technicians at 580- 2720035. Stopwatch This application will open a stopwatch function. Tap the “Start counting” icon to begin timing an item, and the “Pause” icon to pause the timer. Tapping the “Next” icon will pause your current timer, and start timing on the next line. Tap the “Clear” icon to clear all timing data. Calculator This calculator will act exactly as a standard calculator. Simply tap the icons.
displayed on most screens of the player. Setting the 24 hour time to on or off will change the way time is displayed, for example, 3PM will display as 15:00 if set to on, and 3:00 if set to off. Tap the or icons next to each item (year/month/day/etc) to adjust the value of that item. Language Tap one of 11 languages to display items in that language. Display Display allows you to adjust your screen brightness and backlight time. 1.
Calibrate This setting will allow you to calibrate the screen of your player to increase the accuracy of the touch screen. The screen comes pre calibrated, but you can calibrate it to your specific touch using this feature. Just tap the cross hair in the middle to calibrate the device.. Power off This option allows you to set a timer to automatically power the player off. This setting is great if you plan on dozing off to some music, but don’t want to drain the or icons to adjust battery of your device.
Upgrade This option will allow you to update the firmware on the player. Firmware updates will be released at www.machspeed.com. Please check there regularly for updates. Other settings To touch the other settings in the system setting interface to enter other setting mode to set the format main disk or format card. Video Conversion If your video files will not play on your Trio player, you can convert them using the conversion tool which is included with the device.
settings you may need to right click on the file and select “run as administrator”. Once installed, you will have an item called “Media Player Utilities” in your programs list. Select this item and then “Video Converter” or “AVI Converter”. Once the conversion tool is open, the first step in actually converting and loading the file is to select the file you wish to convert.
line and select the “Video Path” button and use the “browse for folder” window to select the save location. As this conversion tool is already calibrated to convert your files for optimal quality, you simply need to and the player will select the “Begin” button convert the file for you. Please note that if the player is connected to your computer when you open this tool, you will see an additional window to the right of the main window. This is the media player window.
Selecting this will save you a step in loading your video files, as the converter will save a copy of the converted file to your computer, and then automatically load it on to the player as well! Once the file has finished converting and loading on to your player, follow the “Safely remove hardware” instructions outlined above, and enjoy your video. If you receive an error when attempting to convert a video file, then you likely lack the proper video codecs on your computer.
for one year from the date of new purchase. During the warranty period and upon proof of purchase the product will be repaired or replaced (with the same or a similar model, which may be a refurbished model) at Mach Speed Technologies option, without charge for either parts or labor. This warranty shall not apply if the product is modified, tampered with, misused, physically damaged, or subjected to abnormal working conditions (including, but not limited to, electrical, fire, and water damage).
no problems or defects. 2. Items found to be out-of-warranty or not belonging to Mach Speed Technologies will not be replaced. Instead, they will be returned back to the customer freight-collect. 3. RMA’s will be shipped back to customer via UPS ground delivery. Express shipping will be at additional costs to the customer. 4. All RMA’s must be accompanied with a copy of original receipt or invoice with name, return address and phone number of customer. Exchanges: 1.
Discrepancy & Shipping Damage: 1. For wrong items, missing items, shipping damage, or other discrepancy; customer should report to RMA department on the day in which the items were received. Any claims after one business day of receipt will not be honored. 2. For any shipping damage, customer must file a claim with their carrier immediately. All items are shipped insured, thus must be reported for coverage. 3.
components or transportation facilities, or any act, refusal to act, regulation, order or intervention of any governmental authority. 2.