Content 1 2 3 General Information ......................................................................................................................................... 3 1.1 Profile .................................................................................................................................. 3 1.2 Safety Information ............................................................................................................... 3 1.3 Safety warning and Attentions .............
3.7 4 5 Using the Headset .............................................................................................................. 14 Input method ................................................................................................................................................... 15 4.1 Key for Input Methods....................................................................................................... 15 4.2 To Shift Entry Methods...........................................
Appendix ................................................................................................................................................................. 28 1 1.1 General Information Profile Please read this pamphlet carefully in order to make your phone in perfect condition. Our company may change this mobile phone without prior written notice and reserves the final right to interpret the performance of this mobile phone.
· Set phone password 1.3 Safety warning and Attentions Safety warning ROAD SAFETY COMES FIRST Do not use a hand-held phone while driving. Use hands-free fittings when calls are unavoidable while driving. In some countries, dialing or receiving calls while driving is illegal! SWITCH OFF IN AIRCRAFT Wireless devices can cause interference in aircraft. Using a mobile phone in flight is illegal and risky. Please make sure that your mobile phone is powered off in flight.
The conversation quality of any mobile phone may be affected by radio interference. An antenna is built inside the mobile phone and located below the microphone. Do not touch the antenna area during a conversation, lest that the conversation quality deteriorate. QUALIFIED SERVICE Only qualified personnel may install or repair phone equipment. Installing or repairing the mobile phone on your own may bring great danger and violate the warranty rules.
Keep the mobile phone and all its fittings beyond children's reach. Keep the mobile phone dry. Keep away from rain, moisture, liquid or other substances that may corrode electronic circuits. Do not use or store the mobile phone in dusty place, lest that active parts of the mobile phone be damaged. Do not store the mobile phone in a high-temperature place. High temperature will shorten the life of electronic circuits and damage the battery and some plastic parts.
2.2 Functions of Keys Dial key Press it to originate a call by entering the called number or selecting a contact from the phonebook; or press it to receive an incoming call; or press it in standby state to show the latest call records. End key Press it to end a call being dialed or end an ongoing call; or press it to exit the menu and return to the standby state.
2.3 Technical specifications Phone Dimensions (W×D×H): Weight: Lithium battery Rated capacity: Continuous standby duration: (Relates to network status) Continuous conversation duration: (Relates to network status) Please refer to their labels for other data related to the battery and the charger. 3 3.
Exercise caution when operating a SIM card, as friction or bending will damage the SIM card. Properly keep the mobile phone and its fittings such as the SIM cards beyond children's reach. Installation Hold the End key for a while to power off the mobile phone. Take the back cover above the battery away. Take the battery away.
PIN The PIN (Personal identification number, 4 to 8 digits) code prevents your SIM card from being used by unauthorized people. In general, the PIN is supplied with SIM card by the network operator. If PIN check is enabled, you need to input the PIN each time when you power on your mobile phone. The SIM card will be locked if you input wrong PIN code for three times. Unlocking methods as follows: -Input the correct PUK according to the screen tips to unlock the SIM card.
3.2 Installing T-Flash Card The T-Flash card is a pluggable mobile storage card inside the mobile phone. To install the T-Flash card, open its latch, place its indented side downward, insert the card into the card slot, and then close the latch. To remove the T-flash card, open its latch and slightly take the card out. And then close the latch. Note: 1. The mobile phone cannot automatically identify the T-flash card being inserted when the mobile phone is powered on.
A charging animation appears when the battery is being charged. When the charging is complete, the animation disappears. Using a travel adapter: Install the battery into the mobile phone before charging the battery. Connect the adapter of the travel charger with the charging slot in the mobile phone. Ensure that the adapter is fully inserted. Insert the plug of the travel charger to an appropriate power outlet.
Use only the battery provided by the vendor. Otherwise, damages or even injuries could be caused during the charging. Power off the mobile phone before removing the battery. The charging process lasts a longer time for a new battery or a battery not in use for long. If the battery voltage is too low to enable the mobile phone to be powered on, charge the battery for a longer time. In this case, the battery icon does not flicker until a long time after the battery enters the charge status.
3.4 Powering On/Off the Mobile Phone Hold the End key for a while to power on the mobile phone. A power-on animation appears on the display screen. Input the phone lock code and press the OK key if the mobile phone prompts you to input the phone lock code. The original code is 1122. Input the PIN and press the OK key if the mobile phone prompts you to input the PIN. The PIN is provided by the network operator for new opening SIM card. Enter the standby interface.
at the bottom of the slot, or you can’t use it normally. 4 Input method This mobile phone provides English input, smart English input and numeric input method. You can use these input methods when editing the contacts, short messages, files and greeting text. 4.1 Key for Input Methods After you enter an edit window such as a window for editing the contacts, short messages or the memorandum, an icon is displayed to indicate the current input method: Numeric input:“123” English input:“ABC, abc, Abc” 4.
Key Number key 1 Number key 2 Number key 3 Number key 4 Number key 5 Number key 6 Number key 7 Number key 8 Number key 9 Number key 0 # key Character or Function .
End key Press it to return to the standby interface English input: Each key is used to represent multiple characters. Quickly and continuously press a key till the character you want appears. Input the next character after the cursor moves. Press the # key to switch between input methods To input a blank, switch to the English input mode (in upper or lower case) and then press number key 0. To clear wrong inputs, press the Right soft key. 4.
missed calls list. Navigate to a missed call and then press the Dial key to dial the number that originated that call. Dialled calls You can view the latest dialed calls. Choose dialled calls and then select a dialed call to delete, save, dial, or edit (or send a short message to it). Received calls You can view the latest received calls. Choose received calls and then select a received call to delete, save, dial, or edit (or send a short message to it).
5.2 Contacts The mobile phone can store up to 500 telephone numbers. The telephone numbers that a SIM card can store depends on the storage capacity of the SIM card. The telephone numbers stored in the mobile phone and in the SIM cards form a phonebook. The phonebook search function enables you to view contacts. You can search a contact as required from the phonebook. Select this option, in the edit interface, input the name of the contact you want to search or the first letter(s) of the name.
Drafts Draft messages are listed in this menu. Sentbox Sent messages are listed in this menu. Templates You can create pre-defined messages in this interface. Broadcast message This network service enables you to receive a variety of text messages, such as broadcast messages about weather forecast or road conditions. At present, few networks provide this service. Please consult the network operator. Voice mail server You can set voice mail through this function. 5.
Call divert: this network function enables you to forward incoming calls to another number you have previously specified. Call waiting: After you choose Activate, the mobile phone will contact the network. A moment later, the network will make a response and send a message to acknowledge your operation. If the call waiting function is activated, the network will alert you and the mobile phone screen will display the incoming call number if others are calling you while you are already in a conversation.
phone after recharging. Language settings: Select the display language and writing language for the mobile phone. Shortcuts settings: Customize the shortcut functions of the Up, Down direction keys. In the standby interface, you can press a direction key to directly enter the function menu corresponding to that direction key. Auto power on/off: Set the time when the mobile phone will be automatically powered on or off.
Modify PIN2: To change PIN2 code of PIN code. Phone locked: The function enables you to lock/unlock the phone. Entering password to switch on or off the phone. Password is required when the phone is locked. The initial password is1234. Modify privacy password: to change phone password. Privacy: You can set password to protect your date security, include “Call logs”, “Message”, “Camera”, “Names”, “File manager”, “Ebook”, “Calendar” as etc. the initial password is 1234.
Connections Contact the network operator to obtain the following network services: Network account: You can manage network account through this function. GPRS Service: You can select to turn on/off this function. Data connection settings: The default setting is connecting when needed. Network selection: Set Network selection mode to Automatic or Manual. Automatic is recommended.
5.6 Multimedia Camera The phone is provided with a camera, which supports the photographing functions. In the capture interface, roll the phone to align the camera to the picture and then press OK key to capture photos. Pictures will be saved in the file system of the phone or the memory card. DV This function enables you to record dynamic pictures. In the capture interface, press OK key to capture videos clip. Image You can view the pictures in the T-card by this function.
Video Use this function to play video files. By pressing the direction key can you control the playing process of video player: play/pause(OK key), fast forward (press and hold right direction key) and rewind (press and hold left direction key). In video player interface, you can press UP and DOWN keys to control volume. Sound recorder The phone support WAV and AMR. The AMR takes the compression algorithm. So in the same memory condition, it has longer recording time than WAV.
not changed the directory, the root directory contains the default folders only. 5.8 Games There are four games in the list: Doodle jump, CROSSY ROAD, Bubble Party Mix, SUPER PET TWIST 5.9 Application Bluetooth You can transfer data, such as music to other device by Bluetooth. Search the device and receive/transfer data. The received data is automatically stored in the directory. Alarm You can set three alarms through this function.
World clock You can view and set your phone time by choose different time zones. Torch You can turn on/off the flashlight by this function. STK This function is provided by the operator. Please consult the local operator for details. Unit conversion You can switch the different units through this function in weight and length. Ebook You can read the e-books you downloaded here.
SIM card error The SIM card is damaged. The SIM card is not in position. The metal face of the SIM card is polluted.
Poor received signal quality Signals are obstructed. For instance, radio waves cannot be effectively transmitted nearby a high building or in a basement.
The mobile phone cannot be powered on The battery energy is exhausted.
The battery cannot be charged The mobile phone is not in a service area of the GSM network The signal is weak The charging voltage does not match the voltage range indicated on the charger An improper charger is used Move to the network operator's service area Move to a place where the signal quality is high Ensure the charging voltage matches the voltage range indicated on the charger Use the charger specially designed for the mobile phone -32-
Poor contact Ensure the charger plug is in good contact with the mobile phone HONG KONG IPRO TECHNOLOGY CO.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.