Safety Information

ManualsBrandsHONG KONG HDB INVESTMENT ManualsElectronicsTS1

01 02 03 04 05 06

07 08 09 10 11 12

13 14 15 16 17 18

19 20 21 22 23 24

25 26 27 28 29 30

Thank you from purchasing the Dr.Trainer training collar. We

have made every attempt to provide you with the most

technologically advanced product using the most stringent

quality and manufacturing standards. We are conﬁdent you will

be pleased with the results you will attain with your Dr.Trainer.

Please remember you will get better results with the use of

lower shock combined with consistent training techniques. The

use of high levels of shock should only be used as a last resort

and in life-threatening situations. Good luck with your training

and please feel free to contact us should you have any

questions.

1-971-302-6642 or mypetoffers@outlook.com

Key Deﬁnitions

Remote Transmitter: Transmits the signal to the Receiver Collar. It is

waterproof.

Digital Display

Dog 1: The active collar symbol will display to indicate Dog 1. Dog 1 and

Dog 2 symbols will be displayed and switched (additional purchase

required for 2 dog system).

Operation Lock: When the remote is ready to power off, the lock sign will

show up on the screen momentarily, indicating power off mode.

Level of Shock: Shows Dog 1 or Dog 2 level of Shock (Low-1 to High-10).

Level of Vibration: Shows Dog 1 or Dog 2 level of Vibration (Low-1 to

High-5).

Remote Battery Indicator: The battery indicator provides constant

awareness of the remote battery’s power level.

Receiver Battery Indicator: The battery indicator provides constant

awareness of the receiver battery’s power level.

Button Deﬁnitions (factory default settings for Dog 1 mode)

Summary of content (19 pages)

PAGE 1
Thank you from purchasing the Dr.Trainer training collar. We have made every attempt to provide you with the most technologically advanced product using the most stringent quality and manufacturing standards. We are conﬁdent you will be pleased with the results you will attain with your Dr.Trainer. Please remember you will get better results with the use of lower shock combined with consistent training techniques.
PAGE 2
Important Safety Information Not for use with aggressive dogs. Do not use this product if your dog is aggressive, or if your dog is prone to aggressive behavior. Aggressive dogs can cause severe injury and even death to their owner and others. If you are unsure whether this product is appropriate for your dog, please consult your veterinarian or certiﬁed trainer. Safety during on-leash training. It is vitally important that you and your dog remain safe while learning during on-leash training.
PAGE 3
Table of Contents How the System Works………………........…………………………………………….5 Features……………………………………………………………………………………5 Key Deﬁnitions……………………………..……………………………………………..6 Operating Guide……………………….....………………………………………..11 Prepare the Remote Transmitter………………........…………………………………11 Charge the Remote Transmitter………………........…………………………..11 Turning ON the Transmitter…………………………......………………………11 Transmitter Digital Display………………………………......…………………..11 Transmitter Battery……………………………………………....……………….
PAGE 4
Components 1 COLLAR RECEIVER FOR DOG 1 REMOTE TRANSMITTER COLLAR RECEIVER FOR DOG 2 (*FOR 2-DOG SYSTEM, MODEL TS1-2 ONLY) SMART DOG TRAINING COLLAR TS1-1/TS1-2 TEST LIGHT OWNER’S MANUAL BATTERY CHARGER WRIST STRAP 04
PAGE 5
How the System Works Now you can experience the difference a Dr.Trainer can make. Spend less time training and more time enjoying your dog. The Dr.Trainer is comfortable for your pet and easy to use with an advanced digital display that tells you exactly what shock and which level you are using. At the push of a button, your remote sends a signal activating your dog’s Receiver Collar. He receives a safe but annoying stimulation.
PAGE 6
Key Deﬁnitions Remote Transmitter: Transmits the signal to the Receiver Collar. It is waterproof. Digital Display Dog 1: The active collar symbol will display to indicate Dog 1. Dog 1 and Dog 2 symbols will be displayed and switched (additional purchase required for 2 dog system). Operation Lock: When the remote is ready to power off, the lock sign will show up on the screen momentarily, indicating power off mode.
PAGE 7
Level of Shock: Shows Dog 1 or Dog 2 level of Shock (Low-1 to High-10). Level of Vibration: Shows Dog 1 or Dog 2 level of Vibration (Low-1 to High-5). Remote Battery Indicator: The battery indicator provides constant awareness of the remote battery’s power level. Receiver Battery Indicator: The battery indicator provides constant awareness of the receiver battery’s power level.
PAGE 8
Switch Button: Switch between dog 1 and dog 2. Only available on 2-dog system. Additional purchase required for 2 dog system. Voice Button: Produces a positive training tone, which can be customized on the receiver, from the collar. No shock is delivered. Vibration Button: Deliver a continuous vibration on the receiver to the dog. Shock Button: When pressed the contact points will pop up and deliver electric shock to the dog.
PAGE 9
RECORDING BUTTON POWER BUTTON FRONT VIEW Recording Mic STATUS LIGHT BACK VIEW CONTACT POINTS CHARGING JACK Receiver Collar: Delivers shock or warning tone on a signal from the Remote Transmitter. Power Button: Long pressing and holding this button for 2 seconds turns the Receiver Collar on and off.
PAGE 10
Contact Points: The contacts through which the Receiver Collar delivers shock. The contact points will pop up and pull back, when they are activated. Status Light: Indicates when the Receiver Collar has been turned on or off and also serves as a battery charging indicator. Charging Jack: For connecting the charger. Although the Remote Transmitter and Receiver Collar are waterproof without the charger covers, keep the covers in place when not charging to keep debris out of the openings.
PAGE 11
Operating Guide STEP 1: Prepare the Remote Transmitter Charge the Remote Transmitter 1.Locate the Charging Jack under the Remote. 2.Connect one of the charger connectors to the Remote Transmitter Charging Jack. 3.Plug the charger into a standard wall outlet. 4.Charge the Remote Transmitter. Note: The Battery Indicator on the screen and the status light will indicate the charging process.
PAGE 12
STEP 2: Prepare the Receiver Collar Charge the Receiver Collar 1.Lift the rubber cover protecting the Receiver Collar Charging Jack. 2.Connect the charger connector to the Receiver Collar Charging Jack. 3.Plug the charger into a standard wall outlet. 4.Charge the Receiver Collar, the red LED light will blink, charge until the Green Indicator Light comes on and is solid, indicating a full charge. To Turn the Receiver Collar On 1.
PAGE 13
STEP 3: Test the Shock Function To ensure the shock function works properly before using the collar on your dog, it is recommended that you should test the shock function at least once before use. Please follow below instructions on how to use the test light to test. 1.Turn the Receiver Collar on. 2.Place the Test Light Contacts over the Contact Points. 3.Press a shock button on the Remote Transmitter. 4.The Test Light will ﬂash. 5.Turn the Receiver Collar off. Save the Test Light for future testing.
PAGE 14
STEP 4: Fit the Receiver Collar Important: The proper ﬁt and placement of your Receiver Collar is important for effective operation. To assure a proper ﬁt, please follow these steps: 1.Make sure that the Receiver Collar is turned off. 2.Start with your dog standing comfortably. 3.Place the Receiver Collar on your dog’s neck close to the ears. Center the Contact Points underneath your dog’s neck. 4.Check the tightness of the Receiver Collar by inserting one finger between the collar and your dog’s neck.
PAGE 15
Pairing Guide The remote and the receiver are paired by default at factory. In case you want to repair them, please follow below instructions. STEP 1: Enter pairing mode Holding the two minus buttons “-” on both side on the remote at the same time for 3 seconds, the DOG 1 (or DOG 2) sign on the remote screen starts to blink, indicating the remote is ready to pair with the receiver. Now move to step 2.
PAGE 16
FAQ’s Q: Is the shock safe for my pet? While the shock is unpleasant, it is harmless to your pet. Electronic training devices require interaction and training from the owner to achieve desired results. Q: How old does a pet have to be before using the Dr.Trainer? Your pet should be able to learn basic obedience commands such as “Sit” or “Stay.” Pets should be at least 6 months old before using the Trainer.
PAGE 17
FAQ’s Q: Why my pet is not responding when I press a button? •Check to see if the Receiver Collar has been turned on. •If your range has reduced from the ﬁrst time you have used it, please check to see if the battery is low in either the Remote Transmitter or Receiver Collar. •You can verify the Receiver Collar is delivering shock to your pet by placing the Test Light, enclosed in your kit, on the Receiver Collar. Please refer to the “Test Light Instructions” section for details.
PAGE 18
IMPORTANT! Please noted that, as the maximum shock level can be detrimental to dogs that are sensitive to electric shock and different breeds of dog react differently to the same level of shock stimulation, it is highly recommended that you should always start from the lowest intensity level, i.e. Level 1, and pay close attention to your dog’s reaction when increasing the shock level.
PAGE 19
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.