User's Manual

Model#:
EWL-21122-OL
USER MANUAL
WIRELESS CHARGING
DESK LAMP
WITH 10W WIRELESS CHARGER
Packaging Content The Product
-(1) Desk Lamp 1. Wireless charging area
-(1) Charging Cable 2. Brightness button (Down)
-(1) Instruction Manual 3. Power button/light
temperature mode button
4. Brightness button (Up)
5. Charging LED indicator
6. Power input
Product Specifications
-
-
Compatible with Qi wireless
-Operating frequency:
charging devices
115-205kHz
Material: ABS + Aluminium
-LED quantity: 27pcs
alloy
-CRI: >80Ra
-Power input: 5V/3A - 9V/2A
-Center luminance: 800lux
-Wireless charging output
-Color temperature:
power: 10W/7.5W/5W
3000-3200K (warm) /
-Charging distance: 6mm
6500-7000K (white)
(best on 3.5mm)
-LED longevity: 50000hrs
-Efficiency: .73%
-Comes with charging cable
Charging Your Smartphone
1. Place the Wireless Charging Desk Lamp on a flat
surface.
2. Plug charging cable (included) into the indicated port
to an energy source of at least 5V/3A.
3. Place your smartphone onto the wireless area with
the backside down. If your device is compatible with the
wireless charger, your device will automatically start
charging.
*Note: If LED indicator is blinking red, please check your mobile
phone and make sure that no magnets or metals are blocking the
wireless charger.
Using the Lamp
1. With the lamp connected to an energy source, press
the power button to turn the lamp on.
2. Press the power button to cycle through the different
light temperatures.
3. Select from the following light temperature settings:
-Press once for cold white light.
-Press twice for strong warm light.
-Press again for warm white light.
-The fourth press will turn the LED desk lamp off.
4. To adjust brightness, press the Up button to increase
brightness and press the Down button to dim
brightness.
Safety Instructions
Be careful with your product. The following advice will
help you to optimize its life.
-Keep the product dry. Rain, moisture, and liquids of
any kind may contain minerals that can cause
corrosion on the circuits. If the product gets wet, use a
clean soft cloth or dry-wipe immediately and stop
using it. Do not try to dry this product with heat
sources such as dryers or microwaves.
-Do not use abrasive cleaning solvents such as
detergent, alcohol, or other cleaning products to clean
on this product. Only use a clean, dry, soft cloth to
clean the surface.
-Use the product for its intended purposes only.
Improper use or use of incompatible devices may
present a risk of fire, explosion, or other hazards. Never
use a damaged product. Only use this product indoors.
-Do not try to use this product if any of the internal
parts are exposed if the shell is damaged or presents
rupture and if the device is not compatible with the
wireless charger.
-Do not try to use or store this product in dusty or dirty
places. This will affect the beauty of the product and
will reduce its lifetime.
-Do not try to use and store this product in a
high-temperature environment. High temperatures can
deform the product and its parts or even melt it.
-Do not try to store the device in a cold place. Low
temperatures can damage the electrical parts of this
product.
-Always avoid extreme temperatures.
-Do not open, disassemble, compress, bend or fold,
puncture, shatter, or submerge this product.
-Unauthorized modification may damage the product
and will violate the relevant provisions of the use of
radio equipment.
-Do not throw, drop, knock, or vibrate this product.
-Protect this from falls and electric discharges.
-Rough use of the product will destroy the internal
circuit boards and mechanical structure.
-Do not use other batteries or metals on this product
while it is on.
-You can use protective cases to charge your device on
this product, but it may affect its use. This product is
compatible with most cases up to 4mm thick.
-If your case contains metal plates, studs, or magnetic
clasps, you must remove the case before placing your
phone in the wireless charging area.
-Medical implants should stay at least 20 cm from this
product, or any implants that may be damaged by
electromagnetic fields, such as pacemakers.
-Avoid exposing this product to the sun for long periods.
-Avoid exposing it to high temperatures, close to ovens,
fire, or explosive materials.
-Always verify the voltage of your charging adapter and
its conversion to avoid damage to this product.
-Pay attention to the output voltage to avoid damage to
your device.
-Do not try to fix, disassemble or modify this product,
you may lose the warranty and generate damage to the
product. There are no parts that can be repaired by the
user.
-If you do not use this product for long periods, keep it
stored in a dry place, far from extreme temperatures,
humidity, and dust.
-Do not use non-certified energy sources or if they are
incompatible with the product. This may cause failure
as well as fires, explosions, or other damages.
-This is not a toy. Keep it away from children to avoid
accidents. We advise not to let underage children use
this product without supervision.
Recycle
Make a conscious discard of this product. Dispose it
only on recyclable bins. Do not dispose of this
product in a conventional bin. Contact the local
recycling center to know the best way to dispose of
this product. This way you help to avoid the
uncontrolled disposing of residues and promote the
recycling of materials.
FCC Warning
This device complies with part 15 of the FCC Rules.
Operation is subject to the following two conditions:
(1) this device may not cause harmful interference,
and (2) this device must accept any interference
received, including interference that may cause
undesired operation.
Any changes or modifications not expressly
approved by the party responsible for compliance
could void the user's authority to operate the
equipment.
NOTE: This equipment has been tested and found
to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a residential
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to
radio or television reception,which can be
determined by turning the equipment off and on, the
user is encouraged to try to correct the interference
by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment
and receiver.
-- Connect the equipment into an outlet on a circuit
different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician for help.
To maintain compliance with FCC’s RF Exposure
guidelines, This equipment should be installed and
operated with minimum distance between 20cm the
radiator your body: Use only the supplied antenna.
RBXACTIVE.COM
2022© Manufactured by Lifeworks Technology Group LLC. under
license from TRB Acquisitions LLC. New York, NY 10001.
All brands are registered trademarks of their respective companies.
Made in China.
Customer Service: 877-543-3540