Prestige® Touch Screen Thermostat User Guide TM Welcome Congratulations on your purchase of a Honeywell touch screen programmable thermostat. When used with the optional RedLINK Internet Gateway, you can remotely monitor and control the heating and cooling system in your home or business—you can stay connected to your comfort system wherever you go.
Features of your Prestige thermostat With your new thermostat, you can: • Connect to the internet to monitor and control your heating/cooling system and receive alerts by email (requires optional RedLINK Internet Gateway) • View outdoor temperature and humidity (requires optional Wireless Outdoor Sensor) • Control humidification, dehumidifcation or ventilation Your new thermostat also provides: • Adaptive Intelligent Recovery—over time, the Prestige thermostat “learns” how long it takes your system to reach
Quick reference: residential use HOME. Touch to display Home screen. FAN. Select fan mode. SYSTEM. Select system mode (Heat/Cool). MENU. Touch to display options. Start here to set a program schedule. Current schedule. Touch an arrow to change temperature setting and select a Temporary or Permanent Hold. Indoor conditions. Shows indoor temperature and humidity. Current date and time. Current status. Shows system mode (heat/ cool), outdoor temperature and humidity (with optional outdoor sensor). HOME.
Setting the time/date 1 Touch the current time. The screen displays Set Time/Set Date. Fri, Jun 14, 2013 2 Touch Set Time or Set Date. 6:30 pm 3 Touch s or t until the proper time/ date is displayed. 4 Touch Done to save or Cancel to ignore changes. NOTE: The thermostat will automatically switch to and from Daylight Saving Time. 30 Done Setting the fan 1 Touch FAN to display fan settings. FAN 2 Touch On, Automatic, Circulate, or Follow Schedule. Done 3 Touch Done to save and exit.
Setting system mode 1 Touch SYSTEM to display system settings. SYSTEM 2 Touch desired option: Done Heat: Thermostat controls only the heating system. Cool: Thermostat controls only the cooling system. Off: Heating/cooling systems are off. Automatic: Thermostat selects heating or cooling as needed depending on the indoor temperature. Emergency Heat (heat pumps with aux. heat): Controls auxiliary/ emergency heat. Compressor is locked out. 3 Touch Done to save and exit.
Adjusting program schedules 1 Touch MENU. MENU 2 Select Create/Edit Schedule. • Touch Guide Me to create a schedule by answering simple questions. • Touch I’ll do it myself to manually create a program schedule. • Touch View/Edit to view the full schedule and make a quick adjustment. Create / Edit Schedule NOTE: To reduce costs, use the preset Energy Saver settings described on page 5. 3 Select the days to schedule, touch Next. 4 Touch Wake to set your Wake time for selected day(s).
Overriding schedules: residential use 1 Touch s or t to adjust the temperature (right side of screen) and the Hold Until time (left side). The schedule will resume when the Hold Until time expires. Switch To Permanent Hold 2 Touch Switch to Permanent Hold to keep the same temperature until you change it or resume the program schedule. 3 Touch Cancel Hold at any time to resume the program schedule. Overriding schedules: commercial use Touch s or t to adjust the temperature.
Viewing equipment status 1 Touch MENU. MENU 2 Select Equipment Status. 3 Touch s or t to view the status of all the equipment your thermostat is controlling. Depending on how your thermostat was installed, the Equipment Status screen can report data about the following systems: • Heating and cooling • Fan • Humidification • Dehumidification • Ventilation • Maintenance reminders • Thermostat information.
Setting holiday/event schedules: commercial use This feature helps you conserve energy when the workplace is unoccupied for special events and holidays. MENU Holiday / Event Scheduler 1 Touch MENU. 2 Select Holiday/Event Scheduler. 3 Select the item you want to schedule. • Custom Events lets you set up other days for special schedules. • US and Canadian Holiday options let you select from a list of holidays commonly observed in each country. 4 Make selections as prompted on each screen.
Setting custom events: commercial use (continued) 4 Review the settings and touch Done to save them. Touch Back, then Cancel to ignore the changes. Done Setting holiday schedule: commercial use This feature lets you customize temperature settings to be maintained on specified national holidays. The thermostat resumes normal scheduling between selected holidays. 1 Select US Holidays or Canadian Holidays from the Holiday/Event Scheduler menu. 2 Select Add/Edit Holidays.
Setting holiday override: commercial use This feature lets you customize temperature settings to be maintained from now until a specified date. The thermostat resumes normal scheduling on the date you select. MENU Holiday Mode 1 Touch MENU. 2 Select Holiday Mode to display temperatures while you are away on holiday. 3 Touch s or t to select the Heat and Cool temperatures, then touch Next to select return date. 4 Review the settings and touch Done to save them.
Remote setback (commercial use) During Occupied program periods, an occupancy sensor directs the thermostat to go to REMOTE SETBACK settings when the room is empty. If someone is in the room, it uses the Occupied program period settings. The thermostat ignores the occupancy sensor during Unoccupied program periods. If the thermostat is set up to be non-programmable, the sensor directs the thermostat to go to REMOTE SETBACK settings when the room is empty.
Adjusting dehumidification settings: residential use This feature can control a dehumidifier or use your air conditioner to reduce humidity. MENU Dehumidifica on 1 Touch MENU and select Dehumidification. 2 Select Auto. 3 Move the slider bar to select humidity level. 4 Touch Done to save your settings. Touch Cancel to ignore changes.
Adjusting ventilation settings 1 Touch MENU, and select Ventilation. MENU 2 Touch Setting, then select: Auto: Ventilation runs as programmed by the installer. Off: Ventilation remains off unless turned on using the timer. On: Ventilation is always on. 3 Touch s or t to run ventilation temporarily. To turn it off, set it to zero. 4 Touch More Settings to set maintenance reminders and lockouts.
Cleaning the thermostat screen When you select the Clean Screen option, the screen is locked so you don’t accidentally change settings while you clean. MENU Clean Screen 1 Touch MENU. 2 Select Clean Screen. A prompt asks if you want to clean the screen for 30 seconds. 3 Touch Yes. A countdown timer displays elapsed time until the screen is reactivated. Yes NOTE: Do NOT spray any liquid directly on the thermostat. Spray liquids onto a cloth, then use the damp cloth to clean the screen.
Viewing dealer information Check dealer information if you need to contact your installer for maintenance, repairs, or upgrades. MENU Dealer Informa on 1 Touch MENU. 2 Select Dealer Information. 3 Touch Done to return to the menu. THX9421R5021WW 1624 Advanced features Adaptive Intelligent Recovery (residential use only)—Over time, the Presitge® thermostat “learns” how long it takes your system to reach the temperature you want.
Installer options Installer Options require a password and should only be changed by a qualified technician. MENU Installer Op ons To prevent unintended changes or damage to your equipment, do not change these options yourself. Replacing outdoor sensor batteries Replace batteries in your outdoor sensor when a warning appears on the thermostat screen, about 60 days before batteries are depleted. Replace ba eries in your outdoor sensor To replace the batteries: 1 Remove the sensor from the bracket.
Replacing indoor sensor batteries Replace batteries in your indoor sensor when a warning appears on the thermostat screen, about 60 days before batteries are depleted. When the sensor status light begins flashing red, battery power is critically low and will be depleted within 2–3 weeks. During normal operation, the status light remains off. Replace ba eries in your indoor sensor To replace the batteries: 1 Remove the sensor from wallplate. 2 Install 2 fresh AAA alkaline batteries.
Using the humidity display In some circumstances, the humidity displayed on the Home screen may not match humidity near the thermostat. Some systems are set up to use two sensors, one to control humidification, the other for dehumidification. These sensors are often installed in different locations. 45% Humidity Humidity reading depends on location of sensor. Depending on how your thermostat was installed, the thermostat Home screen will display humidity readings from only one sensor.
Optional accessories RedLINK™ Internet Gateway The Honeywell RedLINK Internet Gateway gives you remote access to your Prestige® thermostat from the web, smart phone or tablet. You can view or adjust indoor temperature, system mode and other settings. The Gateway can also send alerts to as many as 6 email addresses to notify you if a problem occurs. Wireless Entry/Exit Remote This device mounts beside your door for one-touch control. Press Away to control to an energy saving temperature when you leave home.
Up to 5-year limited warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of three (3) years from the date of purchase by the consumer. If at any time during the warranty period the product is determined to be defective or malfunctions, Honeywell shall repair or replace it (at Honeywell’s option).
69-2740—01 22
69-2740—01
This thermostat contains a Lithium battery which may contain Perchlorate material. Perchlorate Material—special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate Need Help? For assistance please visit http://yourhome.honeywell.com, or call toll-free: 1-800-468-1502 (residential installation) 1-888-245-1051 (commercial installation) Home and Building Technologies In the U.S.: Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 http://yourhome.honeywell.com ® U.S.
