Honeywell Temperature Sensor TABLE OF CONTENTS INTRODUCTION 3 PRODUCT OVERVIEW 4 BEFORE YOU BEGIN 5 BATTERY INSTALLATION 6 LOW BATTERY WARNING 7 PLACEMENT OF THE REMOTE SENSOR 7 GETTING STARTED 7 TRANSMISSION COLLISION 8 PRECAUTIONS 9 SPECIFICATIONS 9 FCC STATEMENT 10 DECLARATION OF CONFORMITY 11 STANDARD WARRANTY INFORMATION 12 (TS03) USER MANUAL 2
INTRODUCTION PRODUCT OVERVIEW Thank you for selecting the Honeywell Temperature Sensor. This device registers and transmits the temperature data from the remote location to the designated main unit (receiver). FEATURES In this package you will find: • One remote sensor (transmitter) TS03 • One User Manual Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know.
D. WALL-MOUNT RECESSED HOLE • Keeps the remote sensor on the wall E. °C/ °F SWITCH • Selects the temperature display in Celsius or Fahrenheit TS03 SENSOR IS COMPATIBLE WITH ALL HONEYWELL WIRELESS WEATHER STATIONS BEFORE YOU BEGIN • The remote sensor can be placed indoors or outdoors. • We recommend using alkaline batteries for the remote sensor when temperatures are above 32°F (0°C). We recommend using NOTE: 1.
LOW BATTERY WARNING A low-battery indicator [ ] will appear on the remote temperature reading line of the main unit, warning that the remote sensor batteries need replacement. If there is no reception, please perform the following steps: • Bring the main unit and remote sensor close together. • Remove four (4) small screws from the back of the remote sensor with small Phillips screwdriver, and open the battery compartment.
PRECAUTIONS FCC STATEMENT This product is engineered to give you years of satisfactory service if handled carefully. Here are a few precautions: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference • • Do not immerse the unit in water. Do not clean the unit with abrasive or corrosive materials.
DECLARATION OF CONFORMITY STANDARD WARRANTY INFORMATION We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 This product is warranted from manufacturing defects for one year from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized Telephone No.: 1-503-612-8395 declare that the product Product No.: TS03 Product Name: Temperature Sensor adjustment and repair.