UV100A Product Data

ManualsBrandsHoneywell Manualsindoor air quality productsUV Surface or Air Treatment

Table Of Contents

PRODUCT DATA

68-0248-4

UV100A Ultraviolet Systems

UV100A1000 AND UV100A1018 AIR TREATMENT SYSTEMS

UV100A1059 AND UV100A2008 SURFACE TREATMENT SYSTEMS

APPLICATION

When installed in forced air heating and cooling systems,

the UV100A Ultraviolet System kills airborne or surface

micro-organism contaminants.

FEATURES

• SnapLamp™ features replacement lamp handle with

detachable replacement bulb, UC18W or UC36W, to

make replacement more economical.

• UV-C light kills airborne bacteria or surface mold.

• Continuously emits ultraviolet energy.

• UV lamp does not produce ozone.

• Sealed unit design prevents accidental installer and

homeowner contact with the voltage and with the

ultraviolet rays.

• Safe design prevents lamps from lighting unless the

base is correctly mounted on the HVAC duct.

• Lamp light indicator to safely view the lamp operation.

• Power cord that plugs into electrical outlet.

• Quick and easy bulb replacement.

• Easy lamp maintenance.

• Optional AIRWATCH™ Indicator can be installed to

remind customers when to change bulb.

• To capture and minimize micro-organism pass-through

in residential heating, ventilation and air conditioning

(HVAC) systems, combine the Ultraviolet System with

a high-efficiency air filtration system that includes an

electronic air cleaner.

Contents

Application/Features ......................................................... 1

Specifications ................................................................... 2

Ordering Information ........................................................ 2

Installation ........................................................................ 3

Checkout .......................................................................... 9

Troubleshooting and Service ............................................ 9

Maintenance ..................................................................... 9

Parts List .......................................................................... 12

Summary of content (12 pages)

PAGE 1
UV100A Ultraviolet Systems UV100A1000 AND UV100A1018 AIR TREATMENT SYSTEMS UV100A1059 AND UV100A2008 SURFACE TREATMENT SYSTEMS PRODUCT DATA FEATURES • SnapLamp™ features replacement lamp handle with detachable replacement bulb, UC18W or UC36W, to make replacement more economical. • UV-C light kills airborne bacteria or surface mold. • Continuously emits ultraviolet energy. • UV lamp does not produce ozone.
PAGE 2
UV100A ULTRAVIOLET SYSTEMS SPECIFICATIONS IMPORTANT The specifications in this publication do not include normal manufacturing tolerances; therefore, an individual unit may not exactly match the listed specifications. This product is tested and calibrated under closely controlled conditions and some minor differences in performance can be expected if those conditions are changed.
PAGE 3
UV100A ULTRAVIOLET SYSTEMS INSTALLATION When Installing this Product… 1. 2. 3. 4. Read these instructions carefully. Failure to follow them could damage the product or cause a hazardous condition. Check the rating given in the instructions and on the product to make sure the product is suitable for your application. Installer must be a trained, experienced service technician. After installation is complete, check out product operation as provided in these instructions.
PAGE 4
UV100A ULTRAVIOLET SYSTEMS Surface Treatment System When installed next to the cooling coil, the Ultraviolet Surface Treatment System prevents a high percentage of the growth of micro-organisms such as mold that may grow on duct surfaces, coils and drain pans. Individual results depend on careful installation and maintenance. See. Fig. 2. NOTE: When the installer is uncertain about whether the drip pan in the installation can tolerate UV exposure, consult the UV exposure white paper, form no.
PAGE 5
UV100A ULTRAVIOLET SYSTEMS SURFACE TREATMENT SYSTEM 3-1/2 (89) 1 (25) 7 (178) 2-1/4 (57) 14-7/8 (379) 4 (102) 3-1/2 (89) 4-1/2 (114) M17661B 7 (178) AIR TREATMENT SYSTEM (SINGLE-LAMP) 3-1/2 (89) 1 (25) 7 (178) 2-1/4 (57) 7-7/16 (188) 4 (102) 3-1/2 (89) 4-1/2 (114) M17662A 7 (178) 5 (127) 3-1/2 (89) AIR TREATMENT SYSTEM (DUAL LAMP) 3-1/4 (83) 2-3/16 (56) 8-1/2 (216) 3-1/2 (89) 4 (102) 14-7/8 (379) 5 (127) 7 (178) M17663B 10 (254) Fig. 3. Ultraviolet System dimensions in in. (mm).
PAGE 6
UV100A ULTRAVIOLET SYSTEMS 3. Place the appropriate template for your model on the duct surface, centering the bulb hole(s) on the duct. See Fig. 4 (below and next page) for the template for your model. ALIGN EITHER OF THESE LINES AS CLOSE AS POSSIBLE TO DUCT CENTER LINE CENTER OF 2 IN. (51 MM) HOLE FOR LAMP 3/32 IN. (3 MM) PILOT HOLES FOR MOUNTING SCREWS INSTALLATION TEMPLATE FOR AIR TREATMENT SYSTEM (SINGLE LAMP) AND SURFACE TREATMENT SYTEM. M17664B Fig. 4. Ultraviolet System templates. 4. 5. 6.
PAGE 7
3/32 IN. (3 MM) PILOT HOLES FOR MOUNTING SCREWS CENTERS OF 2 IN. (51 MM) HOLES FOR LAMP 3/32 IN.
PAGE 8
UV100A ULTRAVIOLET SYSTEMS 13. CAUTION Breakable Glass Hazard. Can cause personal injury. Be careful when inserting bulb(s) into lamp base. Wear protective gloves when handling bulb(s). Rotate the lamp handle clockwise until it snaps into place with the lamp indicator light aligned with the raised button on the unit cover. See Fig. 7. MERCURY NOTICE This device contains mercury in the sealed ultraviolet bulb(s). Do not place your used bulb(s) in the trash. Dispose of properly. Broken Bulb Cleanup.
PAGE 9
UV100A ULTRAVIOLET SYSTEMS CHECKOUT The installer should verify that the ultraviolet bulb(s) are operating by viewing only through the light indicator on the lamp knob. Do not attempt to look directly into the duct to see the illuminated ultraviolet bulbs.
PAGE 10
UV100A ULTRAVIOLET SYSTEMS 3. Rotate your lamp handle counterclockwise and gently pull the lamp handle to remove the bulb(s). See Fig. 10. 6. 7. Dry bulbs with a clean, dry cloth. Insert the bulb into the base with the lamp light indicator at the eleven o’clock position. Continue pushing and gently rotating counterclockwise until the lamp handle inserts fully into the base. See Fig. 13. M22847 M22841 Fig. 13. Position bulb for insertion back into lamp base. Fig. 10. Remove lamp bulb. 4.
PAGE 11
UV100A ULTRAVIOLET SYSTEMS 2. 3. WARNING 4. UV Light Hazard. Harmful to skin and eyes. Can cause temporary or permanent loss of vision. Never look at bulbs while illuminated. View illumination only through light indicator located on lamp handle. To prevent exposure to ultraviolet light, disconnect power ultraviolet system before servicing any part of heating and air conditioning system. 9. 10. 11. Reconnect power to your UV System.
PAGE 12
UV100A ULTRAVIOLET SYSTEMS PARTS LIST Replacement Bulb/Handle Assembly Replacement Bulb UV100A1000 Air Treatment System (single lamp) (left photo) UC100A1005 UC18W1004 UV100A1059 Surface Treatment System (120V) (center photo) UC100A1054 UC36W1006 UV100A2008 Surface Treatment System (240V) (center photo) UC100A1054 UC36W1006 UV100A1018 Air Treatment System (dual lamp) (right photo) UC100A1054 (two required) UC36W1006 (two required) Unit Description M18621B Automation and Control Solutions Ho