HONEYWELL HANDHELD INFRARED REMOTE CONTROL For Professional Weather Station TE923W TS607 USER MANUAL
Table of Contents Introduction Installation Buttons and Controls Troubleshooting Precautions Specifications Standard Warranty Information 2 3 3 4 5 5 6 6
Introduction Thank you for selecting the Honeywell handheld remote control TS607. This product is a part of the Professional Weather Station TE923W and programs and controls different weather modes via infrared light. It works only with TE923W main unit display, model number TE923WD. Note: In order for handheld remote to operate, you must own a main display unit (TE923WD) of the Professional Weather Station TE923W.
Buttons and Controls A. UP Selects the next available mode anti-clockwise Increases parameters B. DOWN Rotates display for current mode If depressed and hold, enters into the programming mode or changes parameter’s units Confirms set parameters C. SET D. MEMORY E. HISTORY F ALARM/CHART G. CHANNEL H. LIGHT/SNOOZE I.
Recalls the Temperature and Humidity Mode Temperature & Humidity Recalls the Wind Mode Wind mode Recalls the UV Mode UV mode Recalls the Pressure and Weather Forecast Mode Pressure and Weather Forecast Recalls the Rain Mode Rain mode Recalls the Sunrise/Sunset Mode Sunrise/Sunset mode Recalls the Clock and Alarm Mode Clock and Alarm mode Changes bar-chart display to the history for Sea-level pressure, channel 1 temperature or channel 1 relative humidity Change Bar-chart Display Troubleshooti
• • • humidity, which may result in malfunctions, shorter lifespan, damaged batteries, and damaged parts. Do not tamper with the product’s internal components. Doing so will invalidate the warranty and may cause damage. The product contains no user-serviceable parts. Use only fresh batteries. Do not mix new and old batteries. Read the user's manual thoroughly before operating the product. Specifications Power: 2 x UM-4 or AAA 1.5V batteries Weight (without batteries): 3.18oz (90g) Dimensions: 1.61(L) x 5.
