Manual

ManualsBrandsHoneywell ManualsHoneywell Home Special ItemsHoneywell Home T10 Pro Smart with RedLINK thermostat kit with sensor

Table Of Contents

PRODUCT DATA

33-00462-01

T10 Pro Smart Thermostat with

RedLINK

Fig. 1.

APPLICATION

The T10 Smart thermostat with RedLINK™ features an

effortless, 7-Day programmable touchscreen thermostat.

Compatible with 24 VAC systems including:

• Up to 3 Heat/2 Cool heat pump systems

• Up to 2 Heat/2 Cool conventional

• Dual Fuel systems

• Radiant hot water systems including hot water fan coil

• Humidification, dehumidification, or ventilation.

FEATURES

• RedLINK™ C7189R2002 Wiresss Indoor Sensor

Compatible (Up to 20 sensors per thermostat).

• Increase your content and profit per job by including

RedLINK™ indoor temperature, humidity, and motion

sensors that meet your customers’ comfort and

convenience needs. they can be used in combination

for temperature averaging or individually. These

sensors also sense motion and you can select priority

zones based on where motion is detected or by

scheduling.

• Flexible scheduling: You can choose to use location

based temperature control (geofence technology),

program a set schedule or use a combination of both to

make sure your home is always comfortable.

• Location-based temperature control: Using geofence

technology, the T10 Smart thermostat with RedLINK

will automatically use your smartphone’s location,

which can save energy when you leave and make your

home comfortable by the time you return. See

“Scheduling and Geofencing” on page 29 for more.

• Smart scheduling: Adds a Sleep period to location-

based temperature control.See “Scheduling and

Geofencing” on page 29 for more.

• Time-based scheduling: You can program a schedule

where every day is different, a schedule where

weekdays and weekends are different or a schedule

where every day is the same. There are four adjustable

periods per day: Wake, Away, Home and Sleep.See

“Scheduling and Geofencing” on page 29 for more.

• No schedule: You can also choose not to set a schedule

and adjust the thermostat manually. See page 30.

• Tip: The Honeywell Home app can be used to manage

multiple thermostats and multiple users in a

household.

• Smart Alerts: The T10 Smart thermostat with RedLINK™

will send alerts for things like extreme indoor

temperatures and reminders for things like filter

changes.

• Auto change from heat to cool: When Auto mode is

selected, the T10 Smart thermostat with RedLINK™ can

automatically determine whether your home needs

heating or cooling to reach the desired temperature.

• Adaptive Intelligent Recovery: The T10 Smart

thermostat with RedLINK™ learns your heating and

cooling cycle times to make sure the system delivers

the temperature you want, when you want it.

18%

M37811

Summary of content (41 pages)

PAGE 1
T10 Pro Smart Thermostat with RedLINK PRODUCT DATA 2 18% 74 M37811 Fig. 1. APPLICATION The T10 Smart thermostat with RedLINK™ features an effortless, 7-Day programmable touchscreen thermostat. Compatible with 24 VAC systems including: • Up to 3 Heat/2 Cool heat pump systems • Up to 2 Heat/2 Cool conventional • Dual Fuel systems • Radiant hot water systems including hot water fan coil • Humidification, dehumidification, or ventilation.
PAGE 2
T10 PRO SMART THERMOSTAT WITH REDLINK CONTENTS Application ..................................................................................... 1 Specifications ............................................................................... 3 Dimensions..................................................................................... 3-5 Regulatory information ............................................................ 5 Installation Mounting ...........................................................
PAGE 3
T10 PRO SMART THERMOSTAT WITH REDLINK Dehumidification Setting Range: 40% to 80% RH. SPECIFICATIONS Humidity Display Range: 0% to 99%. Table 1. Thermostat Description Feature Description Humidity Sensor Accuracy: ± 5% RH from 30% to 50% RH at 75 F.
PAGE 4
T10 PRO SMART THERMOSTAT WITH REDLINK 11/16 (18) 13/32 (11) 5-1/2 (140) 5-13/64 (131) M37806 Fig. 3. Dimensions of C7189R2002 wireless indoor sensor in In. (mm). M37808 Fig. 5. Dimensions of cover plate in in, (mm) 3-29/32 (99) UP 3-29/32 (99) M37807 Fig. 4. Dimensions of J-Box Adaptor in In. (mm). Product Table 3. RedLINK T10 Thermostat and RedLINK Wireless Accessories Operating Ambient Operating Relative Shipping Physical Dimensions in Part Number Temperature Humidity Temperature in.
PAGE 5
T10 PRO SMART THERMOSTAT WITH REDLINK Table 4. Other Accessories for Use with the T10 Thermostat Product Part Number Operating Ambient Temperature Operating Relative Humidity Shipping Temperature Physical Dimensions in in. (mm) Color Wired Outdoor Sensor (10K ohm Negative Temperature Coefficient) C7089U1006 -40 to 120 °F (-40 to 48.9 °C) 5% to 95% Non-Condensing -40 to 130 °F (-40 to 54.
PAGE 6
T10 PRO SMART THERMOSTAT WITH REDLINK SYSTEM INSTALLATION When Installing This Product... 1. 2. 3. 4. — Read these instructions carefully. Failure to follow the instructions can damage the product or cause a hazardous condition. Check the ratings given in the instructions to make sure the product is suitable for your application. Installer must be a trained, experienced service technician. After completing installation, use these instructions to verify the product operation.
PAGE 7
T10 PRO SMART THERMOSTAT WITH REDLINK Wiring UWP 5 Push down on the tabs to put the wires into the inner holes of their corresponding terminals on the UWP (one wire per terminal) until they are firmly in place. Gently tug on the wires to verify they are secure. If you need to release the wires again, push down the terminal tabs on the sides of the UWP. This wiring is just an example, yours may vary. 6 7 8 M37788 Fig. 9. M37809 Fig. 8.
PAGE 8
T10 PRO SMART THERMOSTAT WITH REDLINK Setting Slider Tabs Set R Slider Tab, see Fig. 10. • Use built-in jumper (R Slider Tab) to differentiate between one or two transformer systems. • If there is only one R wire, and it is connected to the R, Rc, or RH terminal on the old thermostat, set the slider to the up position (1 wire). • If there is one wire connected to the R terminal and one wire connected to the Rc terminal, set the slider to the down position (2 wires). 9 M37790 Fig. 11. WIRING NOTES: 1.
PAGE 9
T10 PRO SMART THERMOSTAT WITH REDLINK COOL ONLY. S L/A S O/B Y AUX Y2 A W2 C L/A S O/B Y AUX Y2 E G S W2 E G W W C K K U R U Rc U R U Rc 2H/1C GAS FURNACE + AIR-CONDITIONING. A R/Rc SWITCH UP R/Rc SWITCH UP 11 C Y G W2 W R FURNACE 1 1 COMMON REQUIRED. M37816 AIR-HANDLER G C Y R Fig. 15. 2H/1C gas furnace. COMMON REQUIRED. 1 M37814 Fig. 13. Cool only. S L/A S O/B Y AUX Y2 1H/1C GAS FURNACE + AIR-CONDITIONING.
PAGE 10
T10 PRO SMART THERMOSTAT WITH REDLINK S L/A S O/B Y AUX Y2 2 TRANSFORMER SYSTEM HOT WATER HEAT + AIR-CONDITIONING (OR HOT WATER COIL). A W2 S L/A S O/B Y AUX Y2 E HOT WATER HEAT WITH POWER OPEN ZONE VALVE. A W2 E G W G C K C K U R U R U Rc U Rc W 1 R/Rc SWITCH UP R/Rc SWITCH DOWN R 24 VOLTS 1 C TRANSFORMER C G R Y W R 1 END SWITCH TH AIR HANDLER BOILER COMMON REQUIRED FROM COOL TRANSFORMER (AIR-HANDLER). TR M37557A Fig. 17.
PAGE 11
T10 PRO SMART THERMOSTAT WITH REDLINK S L/A S O/B Y AUX Y2 E G 4 1H/1C HEAT PUMP WITHOUT AUX HEAT. A S S W2 2H/1C HEAT PU ELECTRIC AUX A L/A 5 O/B Y AUX Y2 E W2 6 W G C K C W 7 K U R U R U Rc U Rc R/Rc SWITCH UP R/Rc SWITCH UP 11 21 C G Y L O R HEAT PUMP/ AIR-HANDLER C G Y 4 3 2 1 31 O AUX R L HEAT PUMP/ AIR-HANDLER 1 COMMON REQUIRED. 1 COMMON REQUIRED. 2 L ONLY CONNECTED IF HEAT PUMP HAS A FAULT TERMINIAL.
PAGE 12
T10 PRO SMART THERMOSTAT WITH REDLINK S S O/B Y AUX Y2 E G 3H/2C HEAT PUMP WITH ELECTRIC AUX HEAT. A L/A 5 S S O/B W2 Y AUX 7 Y2 DUAL FUEL 2H/1C HEAT PUMP A L/A 5 W2 E W 6 K G C C W 6 K U R U R U Rc U Rc R/Rc SWITCH UP 1 C G Y2 Y 4 3 2 L O AUX R HEAT PUMP/ AIR-HANDLER C 1 COMMON REQUIRED. L ONLY CONNECTED IF HEAT PUMP HAS A FAULT TERMINAL. 4 5 4 3 2 1 2 3 R/Rc SWITCH UP G Y L O W R 1 COMMON REQUIRED.
PAGE 13
T10 PRO SMART THERMOSTAT WITH REDLINK Damper Dehumidiﬁer* Furnace or air-handler C from furnace or air-handler * Label for this terminal varies by equipment M37824 Fig. 27. Wired to fresh air damper powered by furnace transformer. M37826 Fig. 29. Wired to low speed fan terminal on HVAC for dehumidification. Mounting thermostat 1. 2. 3. 4. Push excess wire back into the wall opening. Close the UWP door. It should remain closed without bulging.
PAGE 14
T10 PRO SMART THERMOSTAT WITH REDLINK Up to 20 of these optional indoor sensors can be used with the T10 thermostat. These sensors can be used to sense temperature from a different location than the thermostat, average temperature from multiple locations, or control the temperature based on sensor priority (through scheduling, manually selecting priority sensors, or prioritizing active rooms.
PAGE 15
T10 PRO SMART THERMOSTAT WITH REDLINK 1. 1. Remove the cover from the remote sensor see Fig. 35. C7189 S S UWP M37794 Fig. 37. Wiring 1 C7189I sensor. Wiring 4 C7189U1005 sensors (10k ohm) for temperature averaging network. Select 10K in the Installer Setup (ISU 5030) when using C7189U1005 sensor(s). UP M24056A 1 S Fig. 35. Remove the cover 2. 3. 4. 5. S Pull wires through wire hole. Position wallplate on wall, level and mark screw hole positions with pencil.
PAGE 16
T10 PRO SMART THERMOSTAT WITH REDLINK Installer setup (new installation) 1. 2. 3. 4. After the thermostat has powered up, touch “GET STARTED” on the thermostat. After selecting the correct option for each setting, Touch NEXT at the bottom of the display to advance to the next option. To see a list of all setup parameters, go to "Installer setup (ISU)" starting on page 17. The thermostat displays the ISU name.
PAGE 17
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5.
PAGE 18
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 2070 Cool Stages / Compressor stages 0, 1, 2 1 0 setting not available if the system type (ISU 2000) is set to Heat Pump 2071 Heat stages / Backup heat stages 0, 1, 2 1 Maximum of 2 Heat Stages for conventional systems. Maximum of 1 Backup Heat Stages for heat pump applications. Note: this is not counting the compressor heat stages on heat pump systems.
PAGE 19
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 3020 Finish with high • No cool stage • Yes No This ISU is only displayed when the thermostat is set for 2 cool stages. When set to Yes, then once the thermostat has upstaged to stage 2 cool, this feature keeps the high stage of the cooling equipment running until the desired setpoint is reached.
PAGE 20
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Off Fahrenheit: Off 5° F to 65° F (in 5° F increments) Celsius: Off -15.0° F to 18.
PAGE 21
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 3150 Heat Cycles Per 1-12 Hour Stage 1 Default varies based on heating equipment type selected This ISU is only displayed when ISU 2000 is not seat for heat pump and ISU 2070 Heat Stages is set to 1 or 2 stages. Cycle rate limits the maximum number of times the system can cycle in a 1 hour period measured at a 50% load.
PAGE 22
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 3240 Off, 1-5 minutes Minimum Compressor Off Time 5 The thermostat has a built in compressor protection (minimum off timer) that prevents the compressor from restarting too early after a shutdown. The minimum-off timer is activated after the compressor turns off. If there is a call during the minimum-off timer, the thermostat shows “waiting for equipment” in the display.
PAGE 23
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Unlocked Notes Unlocked: User has access to all thermostat settings. Partially Locked: User can modify only temperature settings. Fully Locked: User cannot modify any settings 4110 Keypad Lockout • Unlocked • Partially locked • Fully locked 5000 Indoor air temperature Unchecked box Select this if a wired indoor sensor is Is an indoor connected to the S terminals.
PAGE 24
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 8050 Humidification • Off • On Window Protection Off Requires either wired outdoor sensor or Internet weather (thermostat connected to Wi-Fi and registered to the app). Off: The thermostat controls the humidity level to the user's desired humidity setting. Frost or condensation may appear on windows.
PAGE 25
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 9050 Dehumidification Equipment Setup • Normally open • Normally closed Normally Closed Choose an option appropriate for the type of equipment installed. Normally Open: U contacts will normally be open and will close when the thermostat calls for dehumidification. Normally Closed: U contacts will normally be closed and will open when the thermostat calls for dehumidification.
PAGE 26
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 9210 Dehumidification Filter Replacement Reminder Off, 30, 60, Calendar Days 3 to 12 Calendar Months (in 1 month increments) Off 10000 Ventilation Type • • • • None None: The thermostat does not control ventilation. ERV/HRV: The thermostat controls an Energy Recovery Ventilator or Heat Recovery Ventilator for ventilation.
PAGE 27
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default • ASHRAE is Priority • Lockouts are priority ASHRAE is Priority 10125 Ventilation Priority 10130 Ventilation Low Off, -20° F to 40° F in Off Temperature 5° F increments. Lockout (Off, -29.0° to 4.5°C in varying increments) 10130 Ventilation High Temperature Lockout 10130 Off Off Ventilation High Dew Point 65° F to 85° F in 5° F increments Lockout (Off 26.5° C to 43.
PAGE 28
T10 PRO SMART THERMOSTAT WITH REDLINK Table 5. Installer Setup (ISU) ISU # Installer Setup Name Settings Default Notes 14010 Clock Format • 12 Hour Clock • 24 Hour Clock 12 Hour Clock 14015 Daylight Savings Time • No • Yes Yes Set to Off in areas that do not follow Daylight Saving Time. 14020 Indoor Temperature Display Offset -3° F to 3° F in 1° F increments (-1.50° C to 1.50° C in .5° C increments) 0° F (0.
PAGE 29
T10 PRO SMART THERMOSTAT WITH REDLINK Connect to a hidden Wi-Fi® network 1. 2. 3. 4.   Touch MENU, then Wi-Fi Setup. Touch Other, then Select. When prompted, press the screen to edit the network name. Enter the network name. Press the  or  buttons to change the letter or number. Press the button to move to the next character, or the button to move to the previous character. Use the  or  buttons at the bottom to change letter case. Press Done when complete.
PAGE 30
T10 PRO SMART THERMOSTAT WITH REDLINK • Select “let me choose” to select the days you want grouped. (Ex: 5-1-1 schedule with M-F the same and Sat & Sun each individual). • Once the selected days are chosen touch “Next”. • Set the wake time by scrolling up to down by the hour, the minute, and AM or PM. • Touch “Next”. • If you are using RedLINK wireless indoor sensor(s). Set the Wake priority to “selected rooms” or “Active Rooms”.
PAGE 31
T10 PRO SMART THERMOSTAT WITH REDLINK 3. 4. Write down the date code from that screen. The touch the left arrow at top of display to go to previous screen. Scroll down until “installer Options” is shown. Touch “installer options” and enter date code. How to find more options 1. 2. Getting the most from the T10 Smart Thermostat Touch the menu button. Scroll up and down for more options.
PAGE 32
T10 PRO SMART THERMOSTAT WITH REDLINK 1. 2. 3. 4. Touch menu. Scroll down and select “Preferences”. Select “Date and Time”. Date and time information are displayed. Selected Rooms Rooms you manually select create an average temperature in your home. Set date • If the date shown is incorrect, touch “date”. • Scroll up or down on the left of the display until the correct month is in the middle of screen. • Scroll up or down on the center of the display until the correct day is in the middle of screen.
PAGE 33
T10 PRO SMART THERMOSTAT WITH REDLINK 1 To access or adjust the reminder settings • Select the menu icon. • Scroll down and select “preferences”. • Select the reminder you want to set from the list (shown above). • Press ^ or v to set the timer length. Ranges, increments, and units will change based on the reminder. • Press Done to save the reminder.
PAGE 34
T10 PRO SMART THERMOSTAT WITH REDLINK Indoor Air Quality control Humidification The thermostat reads the indoor humidity level and allows the user to set a humidification setting with or without window protection. The thermostat can be set up to control a humidifier in any system mode in the Installer Setup (ISU 8060). Window Protection Window Protection limits the amount of humidity to prevent frost or condensation on windows.
PAGE 35
T10 PRO SMART THERMOSTAT WITH REDLINK closed, they will open when the thermostat calls for dehumidification. See “Whole House humidifier, dehumidifier, or ventilator wiring” Fig. 26 to Fig. 29. If humidification and dehumidification are both setup to operate in the system mode (Off), the thermostat will automatically enforce a 15% deadband between the humidification and dehumidification settings.
PAGE 36
T10 PRO SMART THERMOSTAT WITH REDLINK reason (outdoor ventilation lockouts, set up to turn Off during Sleep period, turned off by user, etc.), ASHRAE 62.2 is not met during those times. See ISU 1012 to select a Ventilation Priority. Percent On Time The thermostat operates ventilation equipment based on a percentage entered in the installer setup (ISU 1012).
PAGE 37
T10 PRO SMART THERMOSTAT WITH REDLINK Em Heat and auxiliary heat operation Dealer Information This can be viewed by the homeowner when an alert or reminder message appears on the thermostat display. Entering Dealer Information 1. 2. 3. 4. 5. 6. 7. — — — — Touch MENU. Scroll down and select Dealer Information. If this information has not previously been entered, note the date code from this screen. Touch the back arrow in upper left of display. Select “Installer Options”. Enter date code .
PAGE 38
T10 PRO SMART THERMOSTAT WITH REDLINK and weather history, allowing the thermostat to start recovery at the optimal time so it can reach the programmed temperature setting at the programmed time. The T10 thermostat uses two recovery ramps when setup to control a heat pump system. One ramp for the compressor and one ramp for the auxiliary heat. Once the room temperature intersects the compressor ramp, the compressor turns on until the setpoint is reached.
PAGE 39
T10 PRO SMART THERMOSTAT WITH REDLINK Backup Heat Upstage Timer options are Off, 30 minutes to 16 hours. Default is Off. The upstage timer allows* the aux heat to run when the highest heat pump stage has run for longer than the timer setting during a steady state condition. Steady state means the thermostat is cycling to maintain setpoint. Manually raising the setpoint or a scheduled setpoint change will not trigger the upstage timer.
PAGE 40
T10 PRO SMART THERMOSTAT WITH REDLINK HEAT PUMP AND BACKUP HEAT OPERATION Heat pump with outdoor temperature lockouts Outdoor temperature lockouts are optional. See Installer Setup options (ISU 312). Fig. 49. Battery Replacement (indoor sensor) The T10 thermostat does not use any batteries. It is powered by 24 volts from the HVAC transformer using the C (common) wire. When the sensor status light begins flashing red, battery power is critically low and will be depleted within 2–3 weeks.
PAGE 41
T10 PRO SMART THERMOSTAT WITH REDLINK Troubleshooting If you have difficulty with your thermostat, please try the following suggestions. Most problems can be corrected quickly and easily. Display is blank • Check circuit breaker and reset if necessary. • Make sure power switch for heating & cooling system is on. • Make sure furnace door is closed securely. • Make sure the C wire is connected. Heating or cooling system does not respond • Press Menu > System Mode > Heat > Done to set the system to Heat mode.