User Guide

T6 Pro
Programmable Thermostat
User Guide
Package Includes:
T6 Pro Thermostat
UWP Mounting System
Honeywell Standard Installation
Adapter (J-box adapter)
Honeywell Decorative Cover Plate –
Small; size 449/64 in x 449/64 in x
11/32 in (121 mm x 121 mm x 9 mm)
Screws and anchors
2 AA Batteries
Installation Instructions and User
Guide
Honeywell Decorative Cover Plate –
Small; size 449/64 in x 449/64 in x
Call Honeywell Customer Care toll-free at 18004681502.
Customer assistance
Thermostat controls
System status
information
Cool On/Heat On/Em
Heat On, Recovery,
Compressor Protection
Schedule information
Following time based
schedule
Actual time
Mode
Select system mode
Heat/Off/Cool/Auto/
EM Heat (emergency
heat)
Menu
Press to display options.
Start here to set a
program schedule
Indoor temperature
setpoint
Press + or – to change
temperature setting
Actual indoor
temperature
Temperature/
Navigation buttons
Press to increase or
decrease temperature
setpoint and to
navigate menus and
menu options
Fan
Select Fan mode
Auto/On/Circulate
The screen will wake up by pressing any of the five buttons. If powered by the C wire, the screen stays lit for 45 seconds
after you complete changes. If powered by battery only, the screen stays lit for 8 seconds. Depending on how your
thermostat was installed, the screen light may always be on.

Summary of content (30 pages)