Digiview Wireless Thermometer with Atomic Clock USER MANUAL (TE22W) 1 1
INTRODUCTION Thank you for selecting the Hideki Wireless Thermometer with Atomic Time. This device includes precise time keeping and temperature monitoring features that you can use from the comfort of your home. In this package you will find: • One main unit (receiver) • One remote sensor (transmitter) TS03 Please keep this manual handy as you use your new item. It contains practical step-by-step instructions, as well as technical specifications and precautions you should know.
A WEATHER AND PRECISE TIME INFORMATION IN FOUR - LINE LCD DISPLAY 1st line : one-channel remote temperature with trend. 2nd line : indoor temperature with trend . 3rd line : time of day with seconds, time of day with the day of the week, US time zone map. 4th line : calendar and alarms -weekly, single and pre-alarm. I B MEM BUTTON • Toggles between current, minimum and maximum readings of the indoor and remote temperatures. • Clears the memory.
REMOTE SENSOR FEATURES • Remote temperature transmission to the main unit via 433 MHz signal • Case can be wall mounted using built-in hanger • 100 feet (30 meters) transmission range without interference • Selection of the temperature display in Celsius or Fahrenheit C A MADE IN CHINA E D B THERMO – SENSOR A LED INDICATOR • Flashes once when the remote sensor transmits a reading to the main unit. • Flashes twice when battery power is low. B BATTERY COMPARTMENT • Holds two AA-size batteries.
BATTERY INSTALLATION REMOTE SENSOR NOTE: Install the batteries; select temperature unit C° or F° before mounting the remote sensor 1. Remove the screws from the battery compartment with a small Phillips screwdriver. 2. Install 2 “AA” size alkaline batteries (not included) matching the polarities shown in the battery compartment. 3. Replace the battery compartment door and secure the screws. 4. Secure remote sensor in the desired location. MAIN UNIT 1. Open the battery compartment door. 2.
• Make sure the main unit is positioned at 8 feet (2 meters) distance from any interference source such as a TV, computer monitor, microwave, etc. • Within concrete wall rooms such as basements or office buildings, the received signal may be weakened. Always place the unit near the window for better reception. MAXIMUM AND MINIMUM READINGS The maximum and minimum record of the indoor and remote temperatures will be automatically stored in the memory of the main unit (receiver).
MANUAL SETTINGS TIME ZONE • Press MODE button to select time of day with day of the week display mode. • Select the Time Zone by pressing and holding the UP ( ) button for 3 seconds. • Keep holding UP ( ) button until the desired time zone (Pacific, Mountain, Central or Eastern) is highlighted on the main unit’s display map. CLOCK • Press and hold MODE button for 3 seconds: the year digits will flash. • Press UP ( ) or DOWN ( ) to change flashing digits.
SPECIFICATIONS Main Unit Indoor Temperature Proposed operating range : -5.0°C to +50.0°C/ 23.0°F to 122.0°F Temperature resolution : 0.1°C/0.
DECLARATION OF CONFORMITY We Name: Hideki Electronics, Inc. Address: 7865 SW Mohawk, Tualatin, OR 97062 Telephone No.: 1-503-612-8395 declare that the product Product No.: TE22W Product Name: Wireless Thermometer with Atomic Time Manufacturer: Hideki Electronics Ltd. Address: Unit 2304-06, 23/F Riley House, 88 Lei Muk Road, Kwai Chung, New Territories, Hong Kong is in conformity with Part 15 of the FCC Rules.
